New Updated Nutanix NCA-5.20 Exam Test Questions

dumps2023-01-14T01:33:18+08:00

NCA-5.20 is an exam for the Nutanix Certified Architect (NCA) certification, which is a professional-level certification for IT professionals who design, implement, and troubleshoot Nutanix enterprise cloud infrastructure. This certification is intended for experienced IT professionals with a deep understanding of enterprise IT infrastructure, and it is expected to have a high level of difficulty.

To pass this NCA-5.20 exam, you will need to have a strong understanding of Nutanix technology, and best practices and have hands-on experience. It is also recommended to study using official Nutanix materials and to use the updated NCA-5.20 practice tests to gauge your level of understanding of the subject matter. Free updated Nutanix NCA-5.20 exam test questions are below.

Page 1 of 4

1. What should an administrator do after a Protection Domain is migrated?

Restore Virtual Machines

Mount datastores on Hosts

Power on Virtual Machines

2. What is required to successfully live migrate a VM Between two AHV clusters?

Stretch L2 networks across the primary and recovery sites

Configure a Protection domain with synchronous replication

Install and Configure the witness VM on a third Site.

Both clusters must be managed by the same prism central

3. An administrator should use which Nutanix component to to create in-guest clustering?

Storage Pools

Volumes

Blocks

Containers

4. An application vendor had provided a VHD disk for their pre-configured virtual machine.

A Nutanix cluster administrator imported that VHD disk into Image Configuration, but the disk does not list while using Clone from Image Service

Before uploading the vDisk again, which two actions should the administrator perform? (Choose two.)

Convert VHD to QCOW before uploading

Verify correct container is selected

Verify the Image is as type Disk

Verify the Image is Active

5. Which two Protection Domain features require a configured schedule of less than 15 minutes? (Choose two.)

Metro Availability DR

Synchronous DR

Asynchronous DR

NearSyncRD

6. What Nutanix product provides multi-cloud cost and security governance?

Era

Leap

Beam

Flow

7. Refer to the exhibit.

What is indicated by the yellow area of the chart?

Normal utilization

Critical alerts

Warning alerts

Abnormal utilization

8. Which policy specifies that a selected VM will only run on a specific group of nodes?

Isolation

Anti-affinity

Affinity

Fixed

9. An administrator has been asked to investigate performance issues for a business critical application. The application runs on a single VM.

What is easiest way for the administrator to begin troubleshooting this issue?

On the Analysis page, create an entity chart with all metrics included

On the Health page, look for Critical or Warning alerts for the V

Review the metrics charts on the Prism Element Home page

Review the VM Performance tab for the VM in Prism Element

10. An administrator wants to ensure that a particular VM starts before any other VM in the environment after performing maintenance.

How can the administrator achieve this?

Marie the VM as a High Priority VM in Prism Central

Mark the VM for Host Affinity in Prism Element

Mark the VM as an Agent VM in Prism Element

Mark the VM as a High Priority VM in Prism Element

Page 2 of 4

11. A mission critical application with four VMs have been deployed inside of a six-node Nutanix cluster. An alert is generated that a node in the cluster has failed and is no longer online. After the alert, two of the VMs reboot and come back online on another node.

Which feature, when configured, would have prevented the two VMs from rebooting?

Host Anti-Affinity

VM High Availability

Host Affinity

Protection Domain

12. An administrator is managing two AHV and vSphere-based clusters. The administrator is able to install a Windows Guest OS from an ISO Image to VMware VMs, but is unable to do the same activity with AHV VMs.

What should the administrator do to successfully perform this action with AHV VMs?

Verify cluster iSCSI Data Services IP

Provide virtIO Drivers

Manage Nutanix Guest Tools

Change VM settings from BIOS to UEFi

13. How can an administrator access a Windows VM running on a Nutanix cluster if it is unreachable via ping?

Connect using Xi Frame

Open a Virtual Console through Prism Central

Connect using RDP

Open a Virtual Console through Prism Element

14. After adding a remote site cluster, an administrator must map which two entities? (Choose two.)

Networks

Virtual Machines

Consistency Groups

VStores

15. Refer to the exhibit.

An administrator has created a new VM, but when accessing the console to monitor the guest install, the administrator sees the error shown in the exhibit

What is the likely cause of this issue?

The installation media was not mounted.

The wrong type of disk was specified.

The boot order is incorrectly configured.

The Nuianix VirtlO driver (SO was not mounted.

16. Which statement best defines Replication Factor 2 (RF2)?

Data will be written locally, and a second copy then will be replicated to another cluster

Data will be written locally, and a second copy to another disk group

Data will be written locally, and a second copy goes to a remote site

Data will be written locally, and a second copy goes to another node in the same cluster

17. An administrator attempts to reinstall a VM's QuestOS, hut h unable to change the legacy BIOS hoot priority.

Based on the exhibit, what is causing this issue?

GuestOS reinstall is not possible for a VM

The CD-ROM is empty

The VM is currently on

The VM is undergoing a snapshot

18. An administrator wants to copy some virtual machine disk files to ADSF from an external VMware ESXi host.

Which two actions should the administrator take to complete this task? (Choose two.)

Mount container as NFS on external host

Configure Volume Group

Enable CHAP on Volume Group

Configure whitelist on container

19. An administrator completed a successful AOS upgrade, but saw the following alert the following day:

Detected incompatible AHV version What is most likely causing this alert?

The upgraded AOS version is incompatible with AH

AHV was upgraded manually prior to AOS upgrade.

AHV is not at the version that carte with the upgraded AO

NCC version is not compatible with the current AHV version.

20. Protection Domains enable administrators to replicate which two items for Disaster Recovery? (Choose two-)

Volume Groups

Virtual Machines

File Shares

Disk Images

Page 3 of 4

21. Prism Central is managing two clusters, one AHV-based and one vSphere-based vSphere cluster using a stored Prism image, without success.

Why is the administrator experiencing this issue?

The Image Service applies only to AHY clusters.

The Virtual Hardware in the image does not match the vSphere version.

The template image needs to be converted to a V

The template image has not been uploaded to the vSphere cluster.

22. A customer requires the ability to block all network traffic between their VDI VMs and their application VMs running on their Nutanix AHV clusters.

What Nutanix product would meet this requirement?

Beam

Calm

Era

Flow

23. An administrator is looking to store a large amount of unstructured data with capabilities to set up a retention policy.

Which Nutanix product meets this requirement?

Nutanix Mint

Nutanix Piles

Nutanix Storage Container

Nutanix Objects

24. Which component allows you to pair sites for Disaster Recovery Policy Creation using Nutanix Leap?

Protection Policies

Protection Domains

Recovery Plan

Availability Zones

25. Nutanix Support Asked an administrator to provide AHV logs to help solve a support request.

Which task should be performed to provide log files to the support team?

Run NCC Check from the command line

Upload log files from /home/nutanix/data/logs folder

collect logs from the health Page

Enable Pulse to include additional support information

26. An organization runs several core business applications on a Nutanix cluster. System stability and support are critical for these applications, which has an annual maintenance window.

How can the administrator assure that these requirements are met?

Purchase Mission Critical support.

Purchase Ultimate licensing.

Adhere to the STS release cycle.

Adhere to the LTS release cycle.

27. An administrator needs to provide data integrity at the application level for a VM that is replicated to a secondary site.

Which requirement will satisfy this task?

1 VM per Consistency Group

1 VM per Availability Zone

1 VM per Protection Domain

1 VM per Schedule

28. An administrator needs to have a view of current workloads sorted by vCPU count.

What should the administrator do to achieve this task?

Create a New Dashboard adding the VMs widget

Use the Group function in prism Central

Create a new Analysis in Prism Element

Export the VM list in CSV and use an external tool

29. Which Component Allows you to pair sites for disaster Recovery Policy Creation Using Nutanix Leap?

Availability Zones

Protection Domains

Recovery Plans

Protection Policies

30. Refer to the exhibit.

An administrator notices that the Data Resiliency Statue of some components has been reduced to 0. making it impossible to support a node failure in the cluster.

What type of failure is most likely the cause of this issue?

Block

Disk

CVM

Nods

Page 4 of 4

31. An administrator wants to deploy a virtual desktop solution on a Nutanix cluster and wants to use the existing production network segment. Due to security concerns, DHCP traffic is blocked on the upstream network switch.

How should the administrator proceed?

Enable IPAM and configure an IP Address Pool

Enable Nutanix Flow

Enable DHCP on the TOR Switches

Install and configure third-party DHCP Software

32. An Administrator has created a Volume Group for a specific VM on an AHV Cluster.

What is the next step required to user vDisk in the VM?

Attach the Volume Group to the VM

Configure CHAP Authentication

Reboot the VM

Bring the disk Online

33. A new Project is being rolled out to an AHV cluster being monitored by Prism Central. The applications team indicates that the application managed by the project is very memory intensive. The administrator wants to be notified about any memory constraints, should they occur.

How would an administrator most effectively achieve this task?

Search for the VM, then in the Details page go to metrics and select CPU Usage.

Create a new Metric chart for the duster, and analyze Hypervisor Memory Usage.

Create a Report to tracking the Memory Usage.

Create a new Alert Policy for Memory Usage and set to Critical after 80%.

34. Which two entity types can be exported by an administrator who only has access to Prism Element? (Choose two.)

Storage

Health

Network

New Updated Nutanix NCA-5.20 Exam Test Questions

New Updated Nutanix NCA-5.20 Exam Test Questions

Share this post

Leave a Reply Cancel reply

Related Posts