Juniper JNCIP-SP JN0-664 Exam Dumps

dumps2023-04-22T09:31:00+08:00

To pass the Juniper JNCIP-SP JN0-664 exam easily, the online JN0-664 exam information and dumps are useful in the preparation. There are 65 multiple-choice questions in the real Juniper JN0-664 exam, and you have 90 minutes to finish the test. The available language is English. We provide the latest Juniper JNCIP-SP JN0-664 exam dumps, which are valuable for you to pass. Free Juniper certification JN0-664 exam dumps are below.

Page 1 of 2

1. Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)

Route reflectors do not change any existing BGP attributes by default when advertising routes.

A BGP peer does not require any configuration changes to become a route reflector client.

Clients add their originator ID when advertising routes to their route reflector

Route reflectors add their cluster ID to the AS path when readvertising client routes.

2. Exhibit

Click the Exhibit button-Referring to the exhibit, which two statements are correct about BGP routes on R3 that are learned from the ISP-A neighbor? (Choose two.)

By default, the next-hop value for these routes is not changed by ISP-A before being sent to R3.

The BGP local-preference value that is used by ISP-A is not advertised to R3.

All BGP attribute values must be removed before receiving the routes.

The next-hop value for these routes is changed by ISP-A before being sent to R3.

3. A packet is received on an interface configured with transmission scheduling. One of the configured queues.

In this scenario, which two actions will be taken by default on a Junos device? (Choose two.)

The excess traffic will be discarded

The exceeding queue will be considered to have negative bandwidth credit.

The excess traffic will use bandwidth available from other queueses

The exceeding queue will be considered to have positive bandwidth credit

4. Which two statements are correct about VPLS tunnels? (Choose two.)

LDP-signaled VPLS tunnels only support control bit 0.

LDP-signaled VPLS tunnels use auto-discovery to provision sites

BGP-signaled VPLS tunnels can use either RSVP or LDP between the PE routers.

BGP-signaled VPLS tunnels require manual provisioning of sites.

5. Exhibit

The network shown in the exhibit is based on IS-IS

Which statement is correct in this scenario?

The NSEL byte for Area 0001 is 00.

The area address is two bytes.

The routers are using unnumbered interfaces

The system IDofR1_2 is 192.168.16.1

6. Exhibit

Referring to the exhibit, CE-1 is providing NAT services for the hosts at Site 1 and you must provide Internet access for those hosts

Which two statements are correct in this scenario? (Choose two.)

You must configure a static route in the main routing instance for the 10 1 2.0/24 prefix that uses the VPN-

inet.0 table as the next hop

You must configure a static route in the main routing instance for the 203.0.113.1/32 prefix that uses the VPN-

inet.0 table as the next hop.

You must configure a RIB group on PE-1 to leak a default route from the inet.0 table to the VPN-

inet.0 table.

You must configure a RIB group on PE-1 to leak the 10 1 2.0/24 prefix from the VPN-

inet.0 table to the inet.0 table.

7. Which three mechanisms are used by Junos platforms to evaluate incoming traffic for CoS purposes? (Choose three )

rewrite rules

behavior aggregate classifiers

traffic shapers

fixed classifiers

multifield classifiers

8. Exhibit

You are asked to exchange routes between R1 and R4 as shown in the exhibit. These two routers use the same AS number.

Which two steps will accomplish this task? (Choose two.)

Configure the BGP group with the advertise-peer-as parameter on R1 and R4.

Configure the BGP group with the as-override parameter on R2 and R3

Configure the BGP group with the advertise-peer-as parameter on R2 and R3.

Configure the BGP group with the as-override parameter on R1 and R4

9. You want to ensure that L1 IS-IS routers have only the most specific routes available from L2 IS-IS routers.

Which action accomplishes this task?

Configure the ignore-attached-bit parameter on all L2 routers.

Configure all routers to allow wide metrics.

Configure all routers to be L1.

Configure the ignore-attached-bit parameter on all L1 routers

10. Exhibit

CE-1 must advertise ten subnets to PE-1 using BGP Once CE-1 starts advertising the subnets to PE-1, the BGP peering state changes to Active.

Referring to the CLI output shown in the exhibit, which statement is correct?

CE-1 is advertising its entire routing table.

CE-1 is configured with an incorrect peer AS

The prefix limit has been reached on PE-1

CE-1 is unreachable

Page 2 of 2

11. By default, which statement is correct about OSPF summary LSAs?

All Type 2 and Type 7 LSAs will be summanzed into a single Type 5 LSA

The area-range command must be installed on all routers.

Type 3 LSAs are advertised for routes in Type 1 LSAs.

The metric associated with a summary route will be equal to the lowest metric associated with an individual contributing route

12. When building an interprovider VPN, you notice on the PE router that you have hidden routes which are received from your BGP peer with family inet labeled-unica3t configured.

Which parameter must you configure to solve this problem?

Under the family inet labeled-unicast hierarchy, add the explicit null parameter.

Under the protocols ospf hierarchy, add the traffic-engineering parameter.

Under the family inet labeled-unicast hierarchy, add the resolve-vpn parameter.

Under the protocols mpls hierarchy, add the traffic-engineering parameter

13. Which two EVPN route types are used to advertise a multihomed Ethernet segment? (Choose two )

Type 1

Type 3

Type 4

Type 2

14. Exhibit

A network designer would like to create a summary route as shown in the exhibit, but the configuration is not working.

Which three configuration changes will create a summary route? (Choose three.)

set policy-options policy-statement leak-v6 term DC-routes then reject

delete policy-options policy-statement leak-v6 term DC-routes from route-filter 2001: db9:a: fa00 : :/6l longer

set policy―options policy-statement leak-v term DC―routes from route-filter 2001:db9:a:faOO::/61 exact

delete protocols isis export summary-v6

set protocols isis import summary-v6

15. An interface is configured with a behavior aggregate classifier and a multifield classifier How will the packet be processed when received on this interface?

The packet will be discarded.

The packet will be processed by the BA classifier first, then the MF classifier.

The packet will be forwarded with no classification changes.

The packet will be processed by the MF classifier first, then the BA classifier.

16. Exhibit

A network is using IS-IS for routing.

In this scenario, why are there two TLVs shown in the exhibit?

There are both narrow and wide metric devices in the topology

The interface specified a metric of 100 for L2.

Wide metrics have specifically been requested

Both IPv4 and IPv6 are being used in the topology

17. In IS-IS, which two statements are correct about the designated intermediate system (DIS) on a multi-access network segment? (Choose two)

A router with a priority of 10 wins the DIS election over a router with a priority of 1.

A router with a priority of 1 wins the DIS election over a router with a priority of 10.

On the multi-access network, each router forms an adjacency to every other router on the segment

On the multi-access network, each router only forms an adjacency to the DI

18. Exhibit

You are attempting to summarize routes from the 203.0.113.128/25 IP block on R8 to AS 64500. You implement the export policy shown in the exhibit and all routes from the routing table stop being advertised.

In this scenario, which two steps would you take to summarize the route in BGP? (Choose two.)

Remove the from protocol bgp command from the export policy.

Add the set protocols bgp family inet unicast add-path command to allow additional routes to the RIB tables.

Add the set routing-options static route 203.0.113.123/25 discard command.

Replace exact in the export policy with orlonger.

19. Exhibit

You must ensure that the VPN backbone is preferred over the back door intra-area link as long as the VPN is available. Referring to the exhibit, which action will accomplish this task?

Configure an import routing policy on the CE routers that rejects OSPF routes learned on the backup intra-area link.

Enable OSPF traffic-engineering.

Configure the OSPF metric on the backup intra-area link that is higher than the L3VPN link.

Create an OSPF sham link between the PE routers.

20. Exhibit

Which two statements about the output shown in the exhibit are correct? (Choose two.)

The PE is attached to a single local site.

The connection has not flapped since it was initiated.

There has been a VLAN ID mismatch.

The PE router has the capability to pop flow labels

Juniper JNCIP-SP JN0-664 Exam Dumps

Juniper JNCIP-SP JN0-664 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts