D-NWR-DY-01 Dell NetWorker Deploy Exam Dumps

dumps2024-10-18T10:41:34+08:00

Dell Data Protection D-NWR-DY-01 exam is one for Dell NetWorker Deploy v2 Certification. This D-NWR-DY-01 exam contains two parts. Each candidate has 90 minutes to write Part 1 questions, and 30 minutes to write Part 2 questions. You need to pass both parts to pass the D-NWR-DY-01 exam easily. We provide the latest Dell NetWorker Deploy D-NWR-DY-01 exam dumps, which can ensure you pass easily. Free Dell NetWorker Deploy D-NWR-DY-01 exam dumps are available below.

Page 1 of 21

1. A Dell EMC NetWorker storage node is connected to a Data Domain system with a virtual tape library (VTL) configured.

Which type of device should be configured on NetWorker for this VTL on Data Domain?

AFTD

Tape

Cloud

Data Domain

2. You are implementing an EMC NetWorker backup solution for a Microsoft SharePoint 2010 distributed farm. The customer has indicated that a SharePoint granular level recovery is required.

Which backup solution needs to be implemented?

EMC NetWorker Module for Microsoft and a third-party recovery tool

EMC NetWorker Module for Microsoft and BR*Tool

EMC NetWorker Module for Microsoft and EMC VSS provider only

EMC NetWorker Module for Databases and Applications and EMC VSS provider

3. In a Dell EMC NetWorker backup environment, server parallelism is set to '8'. There are eight clients and each client has one save set. There are two devices in the backup pool and each device is accessible to all clients. Max sessions is set to ‘2’ for both devices.

How many save sessions will be directed to each device?

4. An EMC NetWorker customer uses a custom schedule for backups and has disabled auto start in all save groups. Backup reports indicate that a bootstrap backup occurs after each save group is run.

What can you do to ensure that only one bootstrap backup occurs daily?

Place the NetWorker server in its own group and enable autostart.

Run savegrp -O manually for each group.

Disable manual saves in the server configuration.

Run a savefs -O manually for each group.

5. When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service must be restarted on the client for the change to take effect?

nsrexecd

nsrd

nsrindexd

nsrdb

6. A Dell EMC NetWorker administrator is configuring a staging resource to automatically move sets that were saved in the past 7 days to another volume. However, the administrator discovered that no source devices were available.

What is possible reason for this issue?

All tape devices are in write-enabled mode only

Source volumes on the library are not completely full

No disk-based devices were configured

Automatic staging to a different device type is not supported

7. Bootstrap save set is cloned.

8. Which is composed of a single NetWorker server, clients, and storage nodes?

NetWorker datazone

NetWorker server zone

NetWorker backup zone

NetWorker instance

9. You want to perform a single file recovery from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.

What recovery must be performed?

Directed

recover

nsrsnap recover

nsrndmp_recover

10. Which EMC NetWorker database tracks each file in a backup?

CFI

RAP DB

Res DB

Media DB

Page 2 of 21

11. In Dell EMC NetWorker Module for Microsoft with Hyper-V, how are incremental backups stored on a Data Domain device?

Synthetic Full

Full

Virtual Synthetic Full

Cumulative Incremental

12. You have been tasked to protect a newly configured Microsoft SQL server residing within a two node cluster. The following requirements must be met: Backups must be performed daily. All data must be transmitted over the LAN. Hot backup must be performed automatically regardless of which node the virtual server resides on at the time of backup.

What software is required to achieve this?

NetWorker Module for Microsoft Applications and SnapImage

NetWorker PowerSnap Module only

NetWorker Module for SQL only

NetWorker Module for SQL and PowerSnap

13. A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.

Which parameter determines when the volume in the clone pool is a candidate for recycling?

Longest retention time of any save set on the clone volume

Longest retention time of any differential save set on the clone volume

Longest retention time of any full save set on the clone volume

Longest retention time of any incremental save set on the clone volume

14. An EMC NetWorker backup administrator wants to use a single interface to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker. They are also looking for capacity planning information for the various components in the environment.

Which EMC tool is recommended?

Data Protection Advisor

Data Domain Management Console

NetWorker Management Console

Avamar Administrator Console

15. A Dell EMC NetWorker backup administrator wants to back up an Oracle database with NMDA.

Where is the Oracle backup level determined?

NetWorker protection group resource

NetWorker client resource

NSR_BACKUP_LEVEL parameter

RMAN backup script

16. If a NetWorker backup is using a dedicated storage node, what is responsible for storing the tracking information?

NetWorker Server

NetWorker Storage Node

AuthC

NMC

17. An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its "Clients" attribute set to "Client A" while the other attributes are unset. Pool B has its "Groups" attribute set to "sales" and "Levels" attribute set to "full" and other attributes unset.

If a save set is generated from Client A from the "sales" group using a full level backup, which pool will the data be sent to?

Pool B

Pool A

Bootstrap pool

Default Pool

18. Be able to recover Microsoft application data from a persistent snapshot.

What is a recommended EMC Networker add-on module?

EMC Networker Module for Microsoft Applications.

EMC Networker Module for Databases and Applications.

EMC Networker PowerSnap Module.

EMC Networker Snaplmage Module.

19. In a Dell EMC NetWorker environment, what does a “T” in the clone flags for the mminfo command output indicate?

A save set that is on the Cloud Tier device but has not yet moved to the cloud provider

A save set that is on the Cloud Tier device and has already moved to the cloud provider

A save set that is on the CloudBoost device and has already moved to the cloud provider

A save set that is on the CloudBoost device but has not yet moved to the cloud provider

20. You have been asked to implement a EMC Networker backup solution with the following requirements:

(1) Leverage Microsoft SQL VDI (Virtual Device Interface) backup API.

(2) Be able to back up SQL database, transaction logs and filegroups.

What is a recommended EMC Networker add-on module?

EMC Networker Module for Microsoft SQL Server.

EMC Networker Module for Microsoft Applications.

EMC Networker Module for Databases and Applications.

EMC Networker PowerSnap Module.

Page 3 of 21

21. An administrator notes that some tapes are prematurely marked as full.

Which command can be used to fix the issue?

mminfo -o notfull

nsrmm -o notfull

nsrim -o notfull

jbconfig -o notfull

22. An administrator is configuring backups on a client that requires the use of a directive.

Which application-specific module should be specified to ensure specific files are saved regardless of the backup level?

always

swapasm

AES

rawasm

23. A Dell EMC NetWorker backup administrator is deciding between guest-level backups versus NetWorker VMware Protection.

What are the advantages of using NetWorker VMware Protection?

Local storage, VLAN, and file-level incremental backups

Disaster recovery, application consistent, and instant access

Disaster recovery, changed block tracking, and instant access.

Disaster recovery, deduplication, and file-level incremental backups

24. What is a consideration when performing a rollback restore with Dell EMC NetWorker Snapshot Management?

Restoring from tape storage media can potentially take a long time

Restore operation destroys all previously existing data on the target disk

Restore operation requires that individual files to restore be selected

Snapshot must be mounted on a storage node/mount host

25. When creating an EMC NetWorker application-based snapshot, in what order are the steps performed?

1. Freeze application 2. Flush buffers 3. Take snapshot 4. Thaw application

1. Flush buffers 2. Freeze application 3. Take snapshot 4. Thaw application

1. Freeze application 2. Take snapshot 3. Commit writes 4. Thaw application

1. Commit writes 2. Freeze application 3. Take snapshot 4. Thaw application

26. Which command must be used to create a clone action for the existing workflow?

nsrpolicy

nsrworkflow

nsrrecopy

nsradmin

27. In EMC NetWorker, what is a purpose of the network save and recover job daemon?

Coordinate all scheduled backups

Provide the read and write service for CFI databases

Manage the NetWorker resource database

Start other server and storage node daemons

28. What is a benefit of performing DD Boost backups with Dell EMC NetWorker Client Direct?

Deduplication processing occurs only on the storage device

Less data is transferred over the network for full backups

Parallel save stream feature is automatically enabled

Backups can be automatically restarted at known good points

29. You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support.

What additional component needs to be included as part of this installation?

EMC HomeBase Agent

ConnectEMC

SNMP Alert

EMC NetWorker License Manager

30. What is a consideration for using the Dell EMC NetWorker block based backup feature?

No more than 25 consecutive incremental backups can be created.

Backup storage must be deduplication device.

Base client package provides recovery support for all clients.

Full and incremental backups must be on the same device.

Page 4 of 21

31. You have a requirement to set up a NAS appliance into the EMC NetWorker environment. You have the remote username and passwords as well as the Fully Qualified Name (FQN) for the device and you wish to ensure that the NetWorker server can see the NDMP devices before the setup.

Which command should be used to do this?

scanner

diskscan

changer

inquire

32. When Dell EMC NetWorker is integrated with a Data Domain system with DD Boost, what analyzes the data stored on the Data Domain and sends only the unique data for storage?

Storage Node Process

Dynamic Parallel Save Streams

Distributed Segment Processing

Deduplication Node

33. Which EMC NetWorker command lists save sets stored on each volume?

mminfo

nsrinfo

nsrmm

nsrretrieve

34. An EMC NetWorker administrator creates a file called “myfile”. The file contains: print type: NSR client.

What is displayed when the command, nsradmin -i myfile, is executed?

Configuration information for all clients in the data zone

Only the names of the clients in the data zone

List of clients that are currently enabled

List of clients backing up the save set "myfile"

35. What is a benefit of performing DD Boost backups with EMC NetWorker Client Direct?

Reduced network bandwidth usage

Deduplication only occurs on the storage device

Failed backup operations resume at a known good point

Reduced frequency of performing full backups

36. What option for cloud backup devices allows to limit the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

Quality of Service

Throttling

Flexible Scaling

Compression

37. Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?

OTF

TAR

CPIO

ZIP

38. A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated backups using NMM with block based backups (BBB). However, the backup failed when attempting to write to AFTDs.

What is the possible reason for the backup failure?

Federated backups are not supported with BBB

nsrnmmsv backup command was used

Client Direct is not enabled

AFTD is not supported with BBB

39. What is a characteristic of using EMC NetWorker Snapshot Management?

Leverages storage system-based snapshot technology

Must be licensed separately from the capacity licensing model

Replaces the NetWorker SnapImage module

Requires a separate software installation on the NetWorker client

40. A Dell EMC NetWorker administrator wants to start all NetWorker processes on a Linux server.

Which command should be run?

/etc/init.d/networker start

/etc/rc2.d/gst start

/sbin/int.d/networker start

/sbin/init.d/gst start

Page 5 of 21

41. Which backup levels are supported for backup of Oracle databases in an EMC NetWorker environment?

Full and Incremental

Full and Levels 1-9

Synthetic full and Incremental

Synthetic full and Levels 1-9

42. What is the key performance tuning feature that determines the amount of multiplexing when writing to a tape device?

Block Based Backup

Block Based Backup with Parallel Save Stream

Parallelism

Parallel Save Stream

43. Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

nsrfsra

nsrexecd

nsrjobd

nsrd

44. A backup administrator needs to upgrade NVE.

To which folder on the NVE appliance must the upgrade package be copied before starting the upgrade?

/home/avamar/repo/packages

/upgrade

/data01/avamar

/data01/avamar/repo/packages

45. For EMC NetWorker to communicate to DMZ Clients, what port or ports are required for rpcbind (portmapper) to be running and available through the firewall?

7938

7937 and 7938

7937-9936

0-0

46. Which commands can be used to locate the bootstrap SSID on a backup volume?

nstinfo and mminfo

nsrnm and scanner

mminfo and nsrck

scanner and mminfo

47. You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.

What must be done to back up the data on the Celerra?

Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or storage node.

Create a storage node on the Celerra and select NDMP in the "type of storage node" field.

Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this device.

Create an NDMP backup pool and add this pool to a save group with other clients.

48. An administrator wants to perform a directed recovery using EMC NetWorker.

What is a requirement?

Destination client must be in the source client's Remote Access list.

Destination client must be in the source client's servers file.

Administering client must be in the destination client's Remote Access list.

Source client must be in the destination client's Remote Access list.

49. To be able to use the EMC NetWorker Management Console remotely, which network ports need to be open?

10001 through 30000

111 and 514

7937 and 7938

9000 and 9001

50. A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails.

What is the cause of the issue?

PSS is enabled for target Data Domain devices.

The Igtobbb package is not installed.

AFTD device is enabled for Client Direct.

LVM or VxVM are enabled on the OS level.

Page 6 of 21

51. An administrator is backing up a Windows 2008 R2 system using save set ALL with EMC NetWorker version 7.6.2. The administrator notices that no VSS save sets are backed up.

What can be done to back up the VSS save sets?

Specify VSS:DISASTER_RECOVERY=off

Reinstall the client software

Check the VSS service on the client

Recreate the client resource

52. A CloudBoost appliance has been deployed in AWS.

What can be used to configure and manage the CloudBoost appliance?

On-prem CloudBoost Management Console

AWS Cloud portal

Multiple Systems Management

NetWorker Management Console

53. In an EMC NetWorker environment, what is the default retention period for information about completed backups that is contained in the Management Console Database?

3 months

6 months

12 months

1 months

54. An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.

How should this be enforced?

Client-side directive

AES directive

NetWorker user local directive

Server-side directive

55. What type of Microsoft SQL VSS backup is supported in NMM?

Transaction logs

Synthetic incremental

Database differential

Named instance

56. Refer to the Exhibit.

What is the size of the EMC NetWorker synthetic full back up on Saturday?

1.5 TB

1.7 TB

2.45 TB

2.55 TB

57. What are the primary types of Dell EMC NetWorker hosts in a datazone?

Server, Client, and Storage Node

Server, Client, License Management Server, and Management Console

Server, Client, and NetWorker Module for Database Applications

Storage Node, Management Console, and AlphaStor

58. What is the default location of the NMC database on a Linux host?

/opt/nsr/mgmt/gst/lgto_gstdb

/opt/lgtonmc/lgto_gstdb_9

/opt/nsr/management/dbsrv9

/opt/lgtonmc/lgto_gstdb

59. Which type(s) of Dell EMC NetWorker devices need to be created to implement NetWorker integration with Data Domain Cloud Tier?

Data Domain, Cloud Tier, and CloudBoost devices

Data Domain devices only

Data Domain and Cloud Tier devices only

Cloud Tier and CloudBoost devices only

60. What is a characteristic of the Dell EMC NetWorker RAP database?

Database can be modified using Windows Notepad.

Two entries per configured resource exists.

Database is located under /nsr/res/nsrdb.

All update requests are handled by nsrexecd.

Page 7 of 21

61. An Microsoft Exchange server administrator wants to receive a daily e-mail about the backup status of the Exchange server.

Where in the EMC NetWorker Configuration tab can this notification be set?

Client Properties

Notifications

Security Audit Log

Registrations

62. What OS does the NetWorker vProxy Appliance run?

Linux

OpenVMS

Microsoft Windows

Solaris 10

63. An administrator experienced a power failure in their data center. After checking their EMC NetWorker servers, the administrator discovers an error message on one of the nsrd servers.

The error message indicates that themedia database does not exist.

What is the recommended way to fix any corruption in the media database?

Rename the old /nsr/mm file and recover from the bootstrap saveset

Delete the old /nsr/mm files andcreate a new bootstrap saveset

Allow NetWorker to recreate the new /nsr/res files andcreate a new bootstrap saveset

Delete the old /nsr/res file and create a new bootstrap saveset

64. You want to recover a single file from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.

Which recovery must be performed?

Directed

recover

nsrsnaprecover

nsrndmp_recover

65. In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.

What is the reason for the failure?

Volumes labeled in the required pool are appendable.

Protection group is not selected on the pool.

There are no appendable volumes that match the pool.

Tape volumes attached to the NetWorker server are recyclable.

66. In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.

What should be considered to avoid backing up the same data twice?

Exclude database or application data from file system backups

Schedule backups during low performance demands on the application server

Ensure file system and database backups for the same client run at the same time

Configure one workflow for both database and application data

67. Which three components comprise EMC NetWorker’s three tier architecture?

Server, Storage Node and Client

Master Server, Media Server and Client

Server, Storage Agent and Client

Cell Manager, Devices and Client

68. Which type of backup should be used to back up only the DB2 data that has changed since the last full backup using Dell EMC NetWorker?

Cumulative Incremental

Incremental

Differential

Incremental Delta

69. Which NetWorker component communicates with AD/LDAP?

NetWorker Authentication Service

Networker Management Console

NetWorker REST API

NetWorker Authentication Database

70. Which method(s) can you use to display a list of unlabeled tape volumes in EMC NetWorker?

EMC NetWorker Administration Devices window only

mminfo and EMC NetWorker Administration Devices view

EMC NetWorker Administration Media view only

mminfo and EMC NetWorker Administration Media window only

Page 8 of 21

71. In EMC NetWorker, which daemon provides the read and write service for the CFI database?

nsrmmd

nsrjobd

nsrmmdbd

nsrindexd

72. What is a characteristic of cloud volumes in EMC NetWorker?

Infinitely appendable

Recyclable

Space cannot be reclaimed.

Data cannot be compressed or encrypted.

73. The backup of a 2 TB Microsoft Windows file server is exceeding the backup window requirement.

What is the recommended way improve the backup time?

Use block based backups

Decrease the number of AFTD devices on a storage node

Disable Client Direct to perform backups using a storage node

Perform a backup using a remote AFTD device

74. How is the Dell EMC NetWorker multi-tenancy facility option enabled?

Configuring a tenant administrator in a restricted datazone

Adding a license to increase the number of managed zones

Configuring clients to a multi-tenant enabled Data Domain device

Configuring a restricted datazone resource on a NetWorker server

75. What does the -b option specify in the save command?

Bootstrap

Quiet mode

Cross mount points

Destination pool

76. What is a characteristic of EMC NetWorker SnapImage module backups?

Block-level backups of dense file systems

Fast block-level backups of a file system mounted on a proxy server

Immediate recovery of a file system from a persistent snapshot

SAN-based image-level backup and recovery of file systems

77. Which databases are referred to as tracking databases?

Jobs Database and Media Database

NMC Database and Media Database

Client File Index and Stat Database

Media Database and Client File Index

78. What action must be taken before NetWorker can support a bootstrap backup from a Cloud Tier device?

Clone the data from the Cloud Tier device on a different Data Domain system

Shut down all NetWorker processes on the NetWorker server

Clone the data from the Cloud Tier device on the same Data Domain system

Rename the Client File Index directory on the NetWorker server

79. Refer to the exhibit.

A Dell EMC NetWorker administrator is monitoring Cloud Tier save sets.

What does the "T" flag in the clone flags column represent?

Save set exists on a Data Domain device

Save set exists on both a Cloud Tier device and a cloud provider

Save set exists only on a cloud provider

Save set exists only on a Cloud Tier device

80. An EMC NetWorker administrator needs to recover a client file index.

What needs to be executed in order toretrieve this information?

nsrck CL7 (client name)

nsrck CL Ct nsr_getdate

nsrck CI CT nsr_getdate

nsrck CI7 (client name)

Page 9 of 21

81. What is a requirement for a media pool used by CloudBoost devices?

not part of a workflow for direct backups

only one CloudBoost media pool is supported for clones

must contain only CloudBoost devices

type must be backup clone pool

82. You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.

What needs to be done to recover SQL data?

Launch the EMC NetWorker User for SQ

Modify the browse time within the EMC NetWorker User GU

Use Microsoft SQL server native tools to recover the data from EMC NetWorker.

Modify the save set to include the SQL instance or database name.

83. An administrator has created a workflow with a protection group consisting of a single Linux client. The client is enabled for block based backups. The workflow has actions to perform a backup to an AFTD device and then a clone to tape.

What is the result when the workflow runs?

Workflow should fail since cloning block based backups to tape is not supported

Workflow should fail since block based backups must target Data Domain devices

Workflow should complete successfully

Workflow should fail since block based backups do not support Linux clients

84. How does the EMC NetWorker online backup feature work?

Uses a vendor specific API to extract data

Copies the data to a temporary location before back up

Shuts down the database before backing up the data

Used only in an active/passive environment

85. How does EMC NetWorker respond to an AFTD disk full condition?

Suspends all saves to that volume and runs nsrim.

Marks the volume full and terminates the backup.

Marks the volume full and continues the backup to a new volume.

Initiates a staging job to move files off the Advance File Type Device (AFTD).

86. A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.

What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

87. A backup administrator is asked to install NWUI on a Linux-based non-NetWorker Server.

Which software package should be used?

lgtoclnt-nw-19.2-0.x86_64.rpm

lgtoxtdclnt-19.2-0.x86_64.rpm

lgtonwui-19.2.x86_64.rpm

lgtonwuiserv-19.2.x86_64.rpm

88. What cloud solution is designed for situations where workloads are running entirely in the cloud?

Backup from within the Cloud

Backup to the Cloud

Infrastructure-as-a-Service

Replication to the Cloud

89. What provides EMC NetWorker administrators with the information necessary to undo changes that were made to the NetWorker configuration?

NetWorker Authentication Service

Security Audit Logging

Log messages displayed in NetWorker Administration

Resource Update Logging

90. A customer is using NVE to back up their environment. The administrator wants to upgrade it to a newer version.

Which package is needed to accomplish this task?

NveUpgrade-VERSIO

tgz

NveUpgrade-VERSIO

rpm

NveUpgrade-VERSIO

pkg

NveUpgrade-VERSIO

avp

Page 10 of 21

91. An EMC NetWorker customer has two LTO-3 tape drives configured on a NetWorker server. One of the two tape drives is dynamically shared with a NetWorker storage node.

The other tape drive is statically assigned to the NetWorker server. The shared drive stops functioning on the NetWorker server but continues to function on the storage node.

How many nsrmmd processes need to be running on the storage node?

92. Which log file contains the file restore information when a recover is performed using the NetWorker User program?

install_pathlogsdaemon.raw

install_pathlogsvsscr

install_pathlogsmessages

install_pathlogs
etworkr.raw

93. What is a characteristic of an EMC NetWorker advanced file type device?

Duplicate media database records

Only clones to another advanced file type device

Requires CIFS or NFS shares

Requires a separate pool

94. An administrator using EMC NetWorker Power edition plans to add a storage node. In preparation for adding the storage node, they attempt to set server parallelism to 96. When saving the changes to the configuration, the administrator notices that server parallelism reverts back to 64.

Which action needs to be taken to set server parallelism to 96?

Add a storage node enabler code

Set device max sessions to 96

Configure group parallelism to 96

Enable diagnostic mode

95. An EMC NetWorker server has one advanced file type device and a library with four tape drives. Two tape drives are dynamically shared with a NetWorker storage node. One of these shared drives has failed and is now disabled.

By default, how many nsrmmd processes are now running on the NetWorker server?

96. You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment.

Which module is required?

PowerSnap

SnapImage

SnapView

NMM

97. Which backup device type(s) is supported for NMM Exchange backups?

AFTD, Data Domain, and tape

AFTD and Data Domain only

Data Domain only

Data Domain and tape only

98. How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?

Deploy an OVF template.

Invoke the VMware Update Manager to download the installation package.

Run an executable installation package

Copy a zipped installation package to a Linux VM, and run the setup script

99. A Dell EMC NetWorker backup administrator has configured Data Domain Cloud Tier for long-term retention with ECS cloud. After setting up the data movement policy in NetWorker, the administrator discovers that the save set has not moved to their cloud even after cloning completed successfully.

What is a possible reason for this issue?

Data Domain does not have a replication license for managed-file replication.

ECS does not support an app-based policy for cloning using NetWorker.

Data movement policy has not yet run on the Data Domain system.

Backup administrator does not have admin privileges on the Data Domain system.

100. Which daemon controls the library resources?

nsrlcpd

nsrctld

nsrmmd

nsrmmdbd

Page 11 of 21

101. Which command can be used to recover an EMC NetWorker Management Console database?

recover

mmrecov

nwrecover

recoverpsm

102. A customer is running an EMC NetWorker 7.6 server on a UNIX platform and wants to monitor backup operations from the command line.

Which utility can be used?

nsrinfo

nsrmmd

nsrjb

nsrwatch

103. A customer wants to back up two EMC NetWorker clients at the same time every day.

Which NetWorker resource is configured to include both clients?

Group

Policy

Pool

Schedule

104. What is a consideration for a block based backup (BBB) installation and configuration?

Client Direct should be disabled in the client configuration

Checkpoint restart and standard EMC NetWorker directives are not supported

Only Data Domain backup target devices are supported

Linux BBB package (lgtobbb) is required for full and incremental support

105. What is a characteristic of an EMC NetWorker synthetic full backup?

All NetWorker save sets participating in the synthetic full backup must be browsable

NetWorker Snapshot Management supports synthetic full backups

All NetWorker save sets participating in the synthetic full backup must be in the same pool

Supported backup types include file system, databases, and NDMP

106. When the EMC NetWorker Module for SAP on Oracle is used, which interface can be used to perform recoveries?

SAP BR*Tools

backint only

RMAN only

Both backint and RMAN

107. An EMC NetWorker administrator wants to start all NetWorker processes on a Linux server.

Which command should be run?

/etc/init.d/networker start

/etc/rc2.d/gst start

/sbin/int.d/networker start

/sbin/init.d/gst start

108. When configuring a client resource for an EMC NetWorker module client, which are the most important attributes?

Save set, Backup command, and Application information

Save set, Backup command, and Schedule

Backup command, Group, and Schedule

Application information, Group, and Policy

109. During a backup, which EMC NetWorker host is responsible for tracking the number of clone copies?

Storage Node

Server

Client

Console

110. A Dell EMC NetWorker backup administrator is using NetWorker Snapshot Management.

Which recovery type describes a traditional restore from a backup storage media?

Restore from a clone

Snapshot restore

Rollback from a clone

Rollback restore

Page 12 of 21

111. ClientA is a client in an EMC NetWorker environment. There are two EMC NetWorker servers, ServerA and ServerB. There is also one storage node, Storage NodeA. You noticed that there are no entries in the /nsr/res/servers file on ClientA.

Which system(s) is(are) allowed to back up data from ClientA?

Any EMC NetWorker server

ServerA only

Any EMC NetWorker server, using StorageNodeA

No systems are allowed to back up ClientA

112. Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

Throttling

Quality of Service

Virtual Provisioning

Compression

113. A backup administrator is migrating policies from a VMware Backup appliance to the NetWorker vProxy appliance.

Which pre-requisite must be met?

vCenter server is a minimum of version 5.5.x

vProxy version should be 4.x

DDOS version should be 5.7.x and later

NetWorker server and storage node version should be same

114. What is a consideration when deploying a Dell EMC NetWorker client in a clustered environment?

NetWorker software must be installed on shared storage accessible to all hosts

Only the virtual service needs to be defined as a client resource

"All" save set will back up everything including shared data volumes from all nodes

115. A customer wants to use REST API to manage their Linux-based NetWorker backup server.

How should the administrator respond?

REST API cannot be used to manage NetWorker server

Install the lgtoxtdclnt-[version].rpm package

Install the lgtorestapi-[version].rpm package

No additional configuration is required

116. A Dell EMC NetWorker backup administrator is configuring backups for a Microsoft Windows client with several large save sets. The administrator is considering using the parallel save streams feature.

What is a characteristic of the parallel save streams feature?

"Target sessions" on the client controls the number of save streams

Parallel save streams can be enabled on the backup action

Synthetic full backups are supported for only Linux

Save set entry on the client is specified at the file system level.

117. An EMC NetWorker customer wants to perform a complete backup of a SQL server with three databases.

Which save set name should be used?

MSSQL:

MSSQL:DB

MSSQL:*

MSSQL:ALLDB

118. Which databases can be backed up using a NetWorker with NMM?

MongoDB and MySQL

Microsoft SQL and Exchange

PostgreSQL and MongoDB

Oracle and Microsoft SQL

119. An administrator has been asked to assess the options available from the NetWorker backup application.

The objectives are:

- Greater efficiency with virtualized and pooled resources

- IT resources can be provisioned on-demand and easily returned to the resource pool

- Quickly allocate computing resources to meet business demands

- Enhanced security and protection of information assets

What should be recommended to the client?

NetWorker Virtual Edition and CloudBoost virtual;

On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention

On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives

Complete Data Protection Suite as Infrastructure-as-a-Service

120. On an EMC NetWorker Client, which command can be used to backup local data?

save

savepsm

nsrsnap_vss_save

nsrndmp_save

Page 13 of 21

121. In EMC Networker what will automatically mount and label a scratch volume when needed?

Auto Media Management

Dynamic Drive Sharing

nsrjb

nsrmmdb

122. What is the command line alternative to perform a query and generate a report similar to the reports generated within the EMC NetWorker Management Console (NMC)?

gstclreport

mminfo

savefs

ebreport backup

123. A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3.

What is the recommended way to perform this?

Manually copy data to AWS S3

Utilize a Dell EMC Cloud Tier feature.

Deploy a NetWorker storage node in AW

124. What is a recommendation for a Dell EMC NetWorker server software installation?

Use NAS storage to enable higher I/O loads

Install the required Java software after installing the server

Configure multi-tenancy during installation

Store the NetWorker databases on the same partition as the OS

125. What describes the use of Tape Stacking with the embedded storage node on an EMC Disk Library (EDL)?

Backups are created on small virtual tapes and then cloned to one large tape.

Backups are created on large virtual tapes and then cloned to several small tapes.

Backups are stacked in a buffer area and then written to an offsite EDL at a later time.

Backups are stacked in a buffer area and then written to a local EDL at a later time.

126. Which command is used to back up Microsoft-based applications using Dell EMC NetWorker?

nsrnmmsv

nsrdasv

nsrsnap_vss_save

nsrdbsave

127. An administrator wants to select clients on a NetWorker server to start at the same automated time.

To what resource should the clients be assigned?

protection group

policy

schedule

workflow

128. A customer has just upgraded their EMC NetWorker server. The upgrade included a new IP address and hostname.

After updating the configuration file on the client, which service should be restarted in order for the change to be recognized?

nsrdb

nsrexecd

nsrd

nsrindexd

129. Which Dell EMC NetWorker resource represents a collection of Networker-labeled volumes?

Pool

Volume

Save set

Media database

130. Using the EMC NetWorker directive listed below, what happens to all files under /export/home?

<< / >> +compressasm: .

<< /export/home >> forget ignore

Nothing under /export/home is compressed.

Only files under /export/home are compressed.

All .nsr files under / are obeyed.

Nothing under /export/home is backed up.

Page 14 of 21

131. A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.

On the volume, what property determines when the volume in the clone pool is a candidate for recycling?

Longest clone retention time of any save set

Longest clone retention time of any differential save set

Longest clone retention time of any full save set

Longest clone retention time of any incremental save set

132. The mode of an EMC NetWorker volume was prematurely set to "full".

Which command can be used to change the status of the volume to "appendable"?

nsrmm

mminfo

mmlocate

nsrim

133. A customer’s EMC NetWorker environment has a Solaris client that had been backing up without failing for several weeks.

The client has the following local mount points:

/

/usr

/home

/var

And two nfs mount points:

/mars/data1

/jupiter/data1

The save set was identified as "ALL" in the client resource. The client had crashed and was successfully rebooted the previous day. The first request for a restore for this client was submitted for the last night's backup of /mars/data1/Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is successful but the mars data is not found and fails to be restored.

What is the most likely cause of this restore failure?

/mars/data1 was not in the /etc/vfstab file and had not been backed up.

The /nsr/res/servers file on mars is empty, prohibiting the restore.

The nsrexecd was not running on mars, preventing the backup.

The client save set was identified as AL

ALL does not back up nfs mounts points.

134. A Dell EMC NetWorker environment has a cluster consisting of two physical nodes and one virtual service.

What is the minimum number of NetWorker client resources that must be created to ensure all of the data will be backed up?

135. Which applications are supported by the EMC NetWorker Module for Microsoft (NMM) federated backup?

Exchange Database Availability Group and SQL Always On Availability Group

SharePoint distributed farm and Windows Hyper-V CSV

Both full and incremental backups of Sybase and Exchange Database Availability Group

SharePoint distributed farm and SQL Always On Availability Group

136. Which Dell EMC NetWorker database allows an administrator to browse backup details for a particular point in time?

Jobs database

Resource database

Media database

Client File Index

137. A Dell EMC NetWorker backup administrator wants to recover a large number of files from a backup.

Which type of recovery is recommended for the restore?

Snapshot

Directed

Save Set

Browsable

138. A customer asks an administrator to configure a Microsoft SQL server backup.

Which technologies can be used by NMM for the backup?

BBB and RCT

VDI and VSS

RCT and VDI

VSS and BBB

139. Refer to the exhibit.

In an EMC NetWorker environment, the storage node sn1 is down for maintenance.

According to the client properties, what happens when the backup of the client starts?

The backup will fail as the storage node sn1 is not available.

The backup data will be sent to any available storage node.

The backup data will be sent to the NetWorker server.

The backup data will be sent to the storage node sn2.

140. A backup administrator is configuring Dell EMC NetWorker to use Data Domain Cloud Tier devices. During the configuration, a message appears that the Data Domain data movement policy will be updated to an app-based policy.

What is a function of the app-based policy?

Direct the Data Domain system to copy data to the cloud provider

Direct the NetWorker backup action to copy data directly to the cloud provider

Direct the NetWorker backup action to copy data to the Data Domain device

Direct the NetWorker clone action to copy data to the Data Domain Cloud Tier device

Page 15 of 21

141. An administrator is trying to perform a browsable recovery of files for a cluster virtual client but fails with a 'Permission Denied' error.

What is the cause of the error?

The Remote Access attribute of the virtual client resource does not contain an entry for all physical cluster nodes.

Browsable recovery is not possible for cluster virtual clients; save set recovery must be used.

Browsable recovery is not possible for cluster virtual clients; Active node must be used.

Not all cluster nodes are online at the time of recovery.

142. A backup administrator is configuring a clustered Dell EMC NetWorker storage node.

How are the devices within the cluster configured?

Local

Passive

Virtual

Remote

143. An administrator installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period will end soon.

What should the administrator tell the customer?

NetWorker will operate for 90 more days with a trial license

NetWorker will operate for 60 more days with a trial license

A permanent license must be applied immediately

NetWorker will operate indefinitely with a trial license but without support

144. A customer has just purchased NetWorker software and asks a backup administrator to deploy a NetWorker server on an Oracle Solans 11 host.

How should the administrator respond?

NetWorker Server is not supported on Oracle Solaris hosts.

Install the Igtoclnt pkg. Igtoman pkg, Igtonode.pkg, Igtoauthc.pkg, and Igtoserv.pkg packages

Install Igtobbb pkg, Igtoserv pkg and Igtonode.pkg packages only

Upgrade the Oracle Solaris to version 12.

145. What is a characteristic of the EMC NetWorker SnapImage module?

Block-level backups of dense file systems

Fast block-level backups of a file system mounted on a proxy server

Immediate recovery of a file system from a persistent snapshot

SAN-based image-level backup and recovery of file systems

146. A Dell EMC NetWorker backup administrator wants to generate a list of monthly backups from the command line.

Which command can be used to perform the operation?

mminfo

nsradmin

gstclreport

jobquery

147. In a Microsoft Windows environment, what is a characteristic of a bare metal recovery when using Dell EMC NetWorker?

Can be used to restore individual files

Can be used for recovery of networker server database

Required when a host encounters a catastrophic failure

Restores only the operating system

148. A backup administrator has been tasked with installing the NetWorker Module for Meditech on a host used by a hospital.

Which NetWorker installation package provides the additional feature support for this module?

NetWorker.

x.x.exe

NetWorker.

x.x.iso

lgtoxtdclnt.

x.x.exe

lgtoclnt.

x.x.iso

149. When using Dell EMC NetWorker Windows Bare Metal Recovery, what is the requirement for the startup herd disk capacity of the target system?

Capacity does not matter as long as it is large enough to hold all data from the source hard disk

Smaller than the startup hard tusk capacity of the source system

Exactly the same size as the startup hard disk capacity of the source system

At least as large as the startup hard disk capacity of the source system

150. A backup administrator has configured three clients for backup on a newly installed EMC NetWorker server. The administrator has configured a workflow to back up the clients at 6 P.M. each day.

The schedule specifies a synthetic full backup on Sunday and incremental backups the rest of the week. After two days, they notice that the client file indexes for these clients are not being backed up.

What is the reason for this issue?

A device needs to be configured and mounted for the 'Server db backup' action

NetWorker server has not been fully licensed yet

The CFI and bootstrap are only backed up for full backups

The override on the 'Server backup' workflow is set to level 'Incremental'

Page 16 of 21

151. Client A performs backups to Storage Node S where the backup operations are managed by EMC NetWorker Server N. NetWorker Management Console is running on Server Y. Client A's configuration information was lost.

To which component must the client configuration data be restored?

Storage node

NetWorker Management Console server

Client

NetWorker server

152. You are deleting save sets manually from the EMC Net Worker server using CLI commands. You receive an error that the database update has failed.

What process should you verify is running on the Net Worker server?

nsrlcpd

nsrmmdbd

nsrmmd

mminfo

153. To which device do virtual synthetic full backups apply?

AFTD

PowerProtect DD

Tape

ProtectPoint

154. Which URL syntax is correct for NWUI?

https //servemame 9090/nwui

https//servemame 9090/ui

https//servemame 9090

https//servemame 9090/webui

155. What is a characteristic of the EMC NetWorker Block Based Backup for Windows feature?

Reboot is required before an incremental backup can be performed

Full and incremental backups must be on different devices

No more than 25 incremental backups can be created between full backups

Backup storage must be a deduplication device

156. What is a benefit of using remote devices in Dell EMC NetWorker?

Allow the backup workload to be distributed to multiple storage nodes

Save backup time by using image-level backup processing

Isolate groups of clients from other clients in the datazone

Reduce the capacity requirements for backup storage

157. A backup administrator has been asked to license a backup environment which consists of three NetWorker Datazones.

Using a single License Server, how many license files are required?

158. When connecting to an EMC NetWorker console server running on Solaris, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the NetWorker console server.

However, the error message remains.

What needs to be done to resolve the problem?

Reinstall the NetWorker Management Console server.

Reinstall the existing JRE version.

Append /gconsole.jnlp to the URL of the console server.

Restart the console server.

159. To which items do NetWorker directives apply?

guest-level backups of virtual machines and block-based backups

NAS backups, physical servers, and NetWorker module backups

physical servers and guest-level backups of virtual machines

block-based backups, snapshots, NAS backups, and NetWorker module backups

160. Your Oracle DBA runs an RMAN script via cron to back up their data to an EMC NetWorker server. You run a report using the NetWorker Management Console (NMC) to view all backup activity. The Oracle backups are missing from the report.

How do you explain this?

An NMC status report needs to be run on the Oracle client to see this information.

A save set detail report needs to be run via NMC to see RMAN backups.

You need to run an event summary in NMC to see data backed up using a Net Worker module.

Data that is backed up manually is not tracked by NMC reporting.

Page 17 of 21

161. In a Dell EMC NetWorker environment, what must be installed on a new storage node to offload storage node activities from the CloudBoost appliance?

NetWorker storage node, client, and extended client software on a Windows host

Only the NetWorker storage node and client on a Linux host

Only the NetWorker storage node and client on a Windows host

NetWorker storage node, client, and extended client software on a Linux host

162. Which technology is used for backup and recovery with NMM?

NDMP

Parallel Save Streams

Virtual Device Interface

Changed Block Tracking

163. A Dell EMC Networker administrator is protecting a VMware environment with Networker vProxy appliances and needs to perform a recovery.

Which recovery method will create a new virtual machine running directly off the backup image?

Revert a Virtual Machine

Emergency Recovery

Virtual Machine Recovery

Instant Recovery

164. What is the valid option for the mminfo command to display information about the NSM snapshot save sets?

-S snap

-q snap

-q nsrsnap

-S nsrsnap

165. A company wants to install EMC NetWorker server software in their Microsoft Windows environment with uses both SAN-attached disk and DAS.

Where should install the required software?

Separate volume from the OS

C:Program FilesLegato

Proxy host on the SAN

C:Program Files (x86)

166. An EMC NetWorker administrator wants to determine the RPC port range for a host.

Which directory contains this information?

nsrladb

catalogs

jobsdb

nsrdb

167. In a Dell EMC NetWorker datazone, which command should be used to recover the bootstrap save set?

nsrdr

scanner

nsrimport

mmrecov

168. An EMC NetWorker client has a network connection with direct access to a Data Domain Boost (DD Boost) storage device. The client’s 3 TB data disk is 98% full with 0.05% daily change rate. During the backup window the client’s CPU is 80% busy and the client's network interface is 7% busy.

Should Client Direct be recommended for this client?

No; the CPU is heavily utilized

No; the data disk is too full

Yes; the data change rate is low

Yes; direct network access to the DD Boost device exists

169. Which command is run on the EMC Net Worker server to recover the server's Client File Index from available backup media?

nsrck -L7

nwrecover

recover -S

nsrls

170. Your Windows environment consists of several EMC NetWorker servers on the same subnet that is responsible for backing up only specific clients for security reasons. You need to change one backup client’s NetWorker server to allow it to be backed up by both NWServer- A and NWServer-B

Which file do you need to change in order to meet this requirement?

srresservers on Networker Client

srres
srdbdbg on NetWorker Server

srmm
srim.priv on Storage Node

Networkr.cfg on NMC Server

Page 18 of 21

171. What command is used to purge client file index entries for save sets that have passed their retention date?

nsrmm -d

nsrim -X

nsrck -L7

nsrck -L4

172. An EMC NetWorker administrator must perform a recovery of data from a failed client to a new client.

Which type of recovery should the administrator use?

Directed

Browsable

Saveset

Server Recovery

173. When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?

Provide users on the EMC NetWorker management console server the administrative privileges

Provide users on the EMC NetWorker server the administrative privileges

Provide users on the EMC NetWorker management console server the console user privileges

Provide users on the EMC NetWorker server the console user privileges

174. When recovering data from the Cloud Tier with Dell EMC networker, how long is the data retained on the Data Domain device?

3 days

7 days

10 days

14 days

175. When performing a backup of a Microsoft Windows 2008 host, which VSS function does EMC NetWorker perform?

Requests the shadow copy

Creates the shadow copy

Freezes the activities

Maintains the shadow copy

176. An EMC NetWorker administrator wants to create a new custom notification. The notification needs to send an e-mail when a backup failure of a policy occurs.

Which attribute is configured to specify the alert severity that will trigger the notification?

Event

Alert

Priority

Action

177. In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?

7937, 7938

9301, 9302

9000, 9001

8080, 8081

178. An administrator has installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period ends soon.

What should the administrator tell the customer?

NetWorker will operate indefinitely with a trial license but without support.

A permanent license must be applied immediately.

NetWorker will operate for 60 more days with a trial license.

NetWorker will operate for 90 more days with a trial license.

179. What can be recovered with nsrdr in a Dell EMC NetWorker datazone?

Traditional backups and media database

Media and authentication service databases

Snapshot backups and CFIs

Resource files and NetWorker server software

180. A storage administrator wants to add an EMC Data Domain system to their NetWorker environment. At the end of the Device Configuration Wizard, the following error returns: “Failed tocontact the Data Domain system".

What should be done to correct this issue?

Configure NFS access from the Data Domain to the NetWorker storage node

Enable read access from the Data Domain to the NetWorker storage node

Enable write access from the Data Domain to the NetWorker storage n

Configure "administrator" access from the Data Domain share to the NetWorker storage node

Page 19 of 21

181. Which EMC NetWorker host can belong to multiple data zones?

Client

Storage Node

Server

Remote Storage Node

182. What is a feature of the CloudBoost appliance?

enables the transfer of backups to cloud storage

replaces the PowerProtect DD series appliance

enables the transfer of backups to Dell EMC Cloud Tier

replaces the PowerProtect DDVE appliance

183. Which of the NetWorker processes are responsible for managing jukeboxes and tape devices on a storage node?

nsrlcpd and nsrmmdbd

nsrsnmd and nsrmmd

nsrlcpd and nsrmmd

nsrsnmd and nsrlcpd

184. A backup administrator has configured Dell EMC Cloud Tier and the NetWorker data movement policy for long-term retention. The save sets are not moved to the Cloud even though cloning ran successfully.

What is the reason for this issue?

Data movement policy on PowerProtect DD was not running yet

User does not have the Cloud Tier privilege

Data movement will occur only one time per month

Missing replication license on PowerProtect DD

185. If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index (CFI) backed up?

Full

186. Where can an administrator manage NetWorker software package activities in NMC?

Devices

Hosts

Protection

Media

187. Which command must be used to recover the NMC database only?

nsradmin

nsrdr

nsrpolicy

recoverpsm

188. An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system

Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?

NetWorker Block-based Backup software is required.

Logical Volume Manager is required.

No additional software is required.

NetWorker Extended Client software is required.

189. What is a characteristic of Dell EMC NetWorker IBM Domino backups and recoveries?

Domino data base backups occur after the DAOS files

Backups can be configured for only DAOS base directory and sub-directories

Restores are supported at the database and document levels

Domino transaction logs must be backed up with other Domino files

190. What is a function of the nsrwatch program?

View active sessions

Generate online reports

View all NetWorker Servers

View device configuration changes

Page 20 of 21

191. What is one of the features available with VADP (vStorage APIs for Data Protection) in EMC NetWorker?

Option to leverage change block tracking (CBT) feature.

File level recovery is available from Linux image level .vmdk backups.

Single Step VM Recovery to the original machine only.

EMC NetWorker VADP proxy can be a physical server only.

192. In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon, nsrd?

Manage the NetWorker media database

Start other NetWorker server and storage node daemons

Coordinate all scheduled backups

Provide the read and write service for NetWorker CFI databases

193. Which EMC NetWorker daemon provides client files system information?

nsrfsra

nsrexecd

nsrlcpd

nsrindexd

194. How should this be enforced?

Client-side directive

AES directive

NetWorker user local directive

Server-side directive

195. In order to license the vRealize Data protection extension for the Dell EMC NetWorker plug-in, where must the license be applied?

vRealize Orchestrator host

vRealize Automation portal

VMware vCenter host

NetWorker License server

196. Which virtual environments are supported by NetWorker to back up virtual machines?

KVM and Microsoft Hyper-V

Microsoft Hyper-V and Citrix XEN

VMware and Microsoft Hyper-V

Citrix XEN and VMware

197. What are characteristics of the Dell EMC NetWorker Client File Index (CFI) and the media database?

One CFI per physical NetWorker client Only one media database for the datazone

CFI is stored on the client Media database is stored on the NetWorker server

One CFI for the datazone One media database per physical NetWorker client

CFI is stored on the NetWorker server Media database is stored on the client

198. A customer has one PowerProtect DD with 6 devices in 3 different MTrees. Each MTree has one DD Boost Device and 1 DD Cloud Tier Device.

How many app-based policies need to be created?

199. Which directory holds the tracking information of each file backed up by the client "tuba" on EMC NetWorker server "soprano"?

/nsr/index/tuba/db6

/nsr/tuba/db6

/nsr/index/soprano/db6

/nsr/soprano/db6

200. Which Dell EMC NetWorker function is used to rollover NSM snapshots to backup media?

Staging

Backup

Cloning

Aging

Page 21 of 21

201. A Dell EMC NetWorker administrator wants to back up all data residing on a cluster which consists of two physical nodes with one virtual service. The cluster is in an active/passive configuration.

Where must the NetWorker client software be installed?

On each physical node and the virtual service

On each physical node only

On only the passive node

On only the active node

202. Click the Calculator icon in the upper left-hand corner. In an EMC NetWorker environment, the customer is backing up 7.5 TB per day. The 7.5 TB is comprised of 750 million files.

According to EMC best practices, approximately how large will the Client File Index (CFI) be?

167 GB

70 GB

209 GB

307 GB

203. An administrator using EMC Networker Power edition attempts to set server parallelism to 96 when adding a remote storage node. When saving the changes to the configuration, they notice that the server parallelism reverts back to 64.

What action needs to be taken to set server parallelism to 96?

Add EMC Networker Storage Node Enabler Code.

Set device max sessions to 96.

Configure group parallelism to 96.

Enable diagnostic mode.

204. A Dell EMC NetWorker server has been configured to stage from an AFTD upon reaching a high water mark of 80%. After the staging begins, which rule determines when the staging process ends?

All save sets over a specified size are moved.

All save sets older that the "max storage period" are moved.

Capacity used falls to any point below the high water mark.

File system utilization reaches the low water mark.

205. For which Microsoft operating system can you use the EMC NetWorker option to turn off VSS snapshots?

Microsoft Windows 2003

Microsoft Windows 7

Microsoft Windows 2008

Microsoft Windows Vista

206. A Dell EMC NetWorker administrator is configuring the backup environment to use the parallel save streams feature.

However, the administrator notices that the feature is not being used for backups of a specific client.

What is a possible cause for this issue?

Client parallelism = 4 PSS:streams_per_ss = 4

Client parallelism = 8 PSS:streams_per_ss = 4

Client parallelism = 8 PSS:streams_per_ss = 12

Client parallelism = 12 PSS:streams_per_ss = 4

207. What combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC Net Worker?

Multiple backups and multiple recoveries

Multiple backups and only one recovery

Only one backup and multiple recoveries

Only one backup and one recovery

208. An EMC NetWorker client has a file system with two files; A and B.

As the NetWorker administrator, you have created a backup schedule for this client consisting of the following:

- Full back up every Sunday

- Level 2 on Monday

- Level 3 on Wednesday

- Incremental on Thursday

- Level 2 on Friday

File B is changed on Monday, file C is created on Tuesday, file A is changed on Wednesday, and file D is created on Thursday.

Which files will be backed up on Friday?

A, B, C, and D

D only

A and D only

A, C, and D only

209. A backup administrator manages a server environment consisting of hosts running many different operating systems. The administrator wants to deploy Dell EMC NetWorker to back up this environment.

On which hosts' OS can the NetWorker server be installed?

Windows x86 and Windows x64

Windows x64 and Linux x64

Solaris and Linux ia64

Linux ia64 and Linux x64

D-NWR-DY-01 Dell NetWorker Deploy Exam Dumps

D-NWR-DY-01 Dell NetWorker Deploy Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts