JN0-637 Security, Professional (JNCIP-SEC) Exam Dumps

dumps2024-11-19T10:58:07+08:00

Juniper JN0-637 exam is one for JNCIP-SEC certification. To prepare for JN0-637 exam well, the following exam information is useful in your preparation. There are 65 multiple-choice questions in real JN0-637 exam, and you have 90 minutes to finish the test. The pass/fail status is available immediately after taking the test. The JN0-637 exam is only available in English. We have cracked the latest Security, Professional (JNCIP-SEC) JN0-637 exam dumps, which can ensure you pass easily. Free Security, Professional (JNCIP-SEC) JN0-637 exam dumps are available below.

Page 1 of 4

1. You are enabling advanced policy-based routing. You have configured a static route that has a next hop from the inet.0 routing table. Unfortunately, this static route is not active in your routing instance.

In this scenario, which solution is needed to use this next hop?

Use RIB groups.

Use filter-based forwarding.

Use transparent mode.

Use policies.

2. Exhibit:

Referring to the flow logs exhibit, which two statements are correct? (Choose two.)

The packet is dropped by the default security policy.

The packet is dropped by a configured security policy.

The data shown requires a traceoptions flag of host-traffic.

The data shown requires a traceoptions flag of basic-datapath.

3. Exhibit:

You are configuring NAT64 on your SRX Series device. You have committed the configuration shown in the exhibit. Unfortunately, the communication with the 10.10.201.10 server is not working. You have verified that the interfaces, security zones, and security policies are all correctly configured.

In this scenario, which action will solve this issue?

Configure source NAT to translate return traffic from IPv4 address to the IPv6 address of your source device.

Configure proxy-ARP on the external IPv4 interface for the 10.10.201.10/32 address.

Configure proxy-NDP on the IPv6 interface for the 2001:db8::1/128 address.

Configure destination NAT to translate return traffic from the IPv4 address to the IPv6 address of your source device.

4. What are three core components for enabling advanced policy-based routing? (Choose three.)

Filter-based forwarding

Routing options

Routing instance

APBR profile

Policies

5. You want to bypass IDP for traffic destined to social media sites using APBR, but it is not working and IDP is dropping the session.

What are two reasons for this problem? (Choose two.)

The session did not properly reclassify midstream to the correct APBR rule.

IDP disable is not configured on the APBR rule.

The application services bypass is not configured on the APBR rule.

The APBR rule does a match on the first packet.

6. Which two statements are correct about mixed mode? (Choose two.)

Layer 2 and Layer 3 interfaces can use the same security zone.

IRB interfaces can be used to route traffic.

Layer 2 and Layer 3 interfaces can use separate security zones.

IRB interfaces cannot be used to route traffic.

7. Exhibit:

You are having problems configuring advanced policy-based routing.

What should you do to solve the problem?

Apply a policy to the APBR RIB group to only allow the exact routes you need.

Change the routing instance to a forwarding instance.

Change the routing instance to a virtual router instance.

Remove the default static route from the main instance configuration.

8. Exhibit:

In which mode is the SRX Series device?

Packet

Ethernet switching

Mixed

Transparent

9. You configure two Ethernet interfaces on your SRX Series device as Layer 2 interfaces and add them to the same VLAN. The SRX is using the default L2-learning setting. You do not add the interfaces to a security zone.

Which two statements are true in this scenario? (Choose two.)

You are unable to apply stateful security features to traffic that is switched between the two interfaces.

You are able to apply stateful security features to traffic that enters and exits the VLA

The interfaces will not forward traffic by default.

You cannot add Layer 2 interfaces to a security zone.

10. Which two statements are true about the procedures the Junos security device uses when handling traffic destined for the device itself? (Choose two.)

If the received packet is addressed to the ingress interface, then the device first performs a security policy evaluation for the junos-host zone.

If the received packet is destined for an interface other than the ingress interface, then the device performs a security policy evaluation for the junos-host zone.

If the received packet is addressed to the ingress interface, then the device first examines the host-inbound-traffic configuration for the ingress interface and zone.

If the received packet is destined for an interface other than the ingress interface, then the device performs a security policy evaluation based on the ingress and egress zone.

Page 2 of 4

11. Exhibit:

You have deployed an SRX Series device as shown in the exhibit. The devices in the Local zone have recently been added, but their SRX interfaces have not been configured.

You must configure the SRX to meet the following requirements:

Devices in the 10.1.1.0/24 network can communicate with other devices in the same network but not with other networks or the SRX.

You must be able to apply security policies to traffic flows between devices in the Local zone.

Which three configuration elements will be required as part of your configuration? (Choose three.)

set security zones security-zone Local interfaces ge-0/0/1.0

set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan-members 10

set protocols l2-learning global-mode switching

set protocols l2-learning global-mode transparent-bridge

set security zones security-zone Local interfaces irb.10

12. Exhibit:

Referring to the exhibit, which statement is true?

SRG1 is configured in hybrid mode.

The ICL is encrypted.

If SRG1 moves to peer 2, peer 1 will drop packets sent to the SRG1 interfaces.

If SRG1 moves to peer 2, peer 1 will forward packets sent to the SRG1 interfaces.

13. You are asked to create multiple virtual routers using a single SRX Series device. You must ensure that each virtual router maintains a unique copy of the routing protocol daemon (RPD) process.

Which solution will accomplish this task?

Secure wire

Tenant system

Transparent mode

Logical system

14. Click the Exhibit button.

Referring to the exhibit, which three actions do you need to take to isolate the hosts at the switch port level if they become infected with malware? (Choose three.)

A. Enroll the SRX Series device with Juniper ATP Cloud.

B. Use a third-party connector.

C. Deploy Security Director with Policy Enforcer.

D. Configure AppTrack on the SRX Series device.

E. Deploy Juniper Secure Analytics.

15. You want to deploy two vSRX instances in different public cloud providers to provide redundant security services for your network. Layer 2 connectivity between the two vSRX instances is not possible.

What would you configure on the vSRX instances to accomplish this task?

Chassis cluster

Secure wire

Multinode HA

Virtual chassis

16. You are asked to connect two hosts that are directly connected to an SRX Series device. The traffic should flow unchanged as it passes through the SRX, and routing or switch lookups should not be performed. However, the traffic should still be subjected to security policy checks.

What will provide this functionality?

MACsec

Mixed mode

Secure wire

Transparent mode

17. Which two statements are true when setting up an SRX Series device to operate in mixed mode? (Choose two.)

A physical interface can be configured to be both a Layer 2 and a Layer 3 interface at the same time.

User logical systems support Layer 2 traffic processing.

The SRX must be rebooted after configuring at least one Layer 3 and one Layer 2 interface.

Packets from Layer 2 interfaces are switched within the same bridge domain.

18. You have configured the backup signal route IP for your multinode HA deployment, and the ICL link fails.

Which two statements are correct in this scenario? (Choose two.)

The current active node retains the active role.

The active node removes the active signal route.

The backup node changes the routing preference to the other node at its medium priority.

The active node keeps the active signal route.

19. Exhibit:

Host A shown in the exhibit is attempting to reach the Web1 webserver, but the connection is failing. Troubleshooting reveals that when Host A attempts to resolve the domain name of the server (web.acme.com), the request is resolved to the private address of the server rather than its public IP.

Which feature would you configure on the SRX Series device to solve this issue?

Persistent NAT

Double NAT

DNS doctoring

STUN protocol

20. Exhibit:

Referring to the exhibit, what do you use to dynamically secure traffic between the Azure and AWS clouds?

You can dynamically secure traffic between the clouds by using user identities in the security policies.

You can dynamically secure traffic between the clouds by using advanced connection tracking in the security policies.

You can dynamically secure traffic between the clouds by using security tags in the security policies.

You can dynamically secure traffic between the clouds by using URL filtering in the security policies.

Page 3 of 4

21. Exhibit:

Referring to the exhibit, which IKE mode will be configured on the HQ-Gateway and Subsidiary-Gateway?

Main mode on both the gateways

Aggressive mode on both the gateways

Main mode on the HQ-Gateway and aggressive mode on the Subsidiary-Gateway

Aggressive mode on the HQ-Gateway and main mode on the Subsidiary-Gateway

22. You are deploying threat remediation to endpoints connected through third-party devices.

In this scenario, which three statements are correct? (Choose three.)

All third-party switches must support AAA/RADIUS and Dynamic Authorization Extensions to the RADIUS protocol.

The connector uses an API to gather endpoint MAC address information from the RADIUS server.

All third-party switches in the specified network are automatically mapped and registered with the RADIUS server.

The connector queries the RADIUS server for the infected host endpoint details and initiates a change of authorization (CoA) for the infected host.

The RADIUS server sends Status-Server messages to update infected host information to the connector.

23. Exhibit:

Referring to the exhibit, which two statements are correct? (Choose two.)

You cannot secure intra-VLAN traffic with a security policy on this device.

You can secure inter-VLAN traffic with a security policy on this device.

The device can pass Layer 2 and Layer 3 traffic at the same time.

The device cannot pass Layer 2 and Layer 3 traffic at the same time.

24. You want to test how the device handles a theoretical session without generating traffic on the Junos security device.

Which command is used in this scenario?

request security policies check

show security flow session

show security match-policies

show security policies

25. Exhibit:

Referring to the exhibit, which two statements are correct? (Choose two.)

The ge-0/0/3.0 and ge-0/0/4.0 interfaces are not active and will not respond to ARP requests to the virtual IP MAC address.

This device is the backup node for SRG1.

The ge-0/0/3.0 and ge-0/0/4.0 interfaces are active and will respond to ARP requests to the virtual IP MAC address.

This device is the active node for SRG1.

26. Which role does an SRX Series device play in a DS-Lite deployment?

Softwire concentrator

STUN server

STUN client

Softwire initiator

27. Which two statements are correct about the ICL in an active/active mode multinode HA environment? (Choose two.)

The ICL is strictly a Layer 2 interface.

The ICL uses a separate routing instance to communicate with remote multinode HA peers.

The ICL traffic can be encrypted.

The ICL is the local device management interface in a multinode HA environment.

28. Exhibit:

Your company uses SRX Series devices to establish an IPsec VPN that connects Site-1 and the HQ networks. You want VoIP traffic to receive priority over data traffic when it is forwarded across the VPN.

Which three actions should you perform in this scenario? (Choose three.)

Enable next-hop tunnel binding.

Create a firewall filter that identifies VoIP traffic and associates it with the correct forwarding class.

Configure CoS forwarding classes and scheduling parameters.

Enable the copy-outer-dscp parameter so that DSCP header values are copied to the tunneled packets.

Enable the multi-sa parameter to enable two separate IPsec SAs for the VoIP and data traffic.

29. Your IPsec tunnel is configured with multiple security associations (SAs). Your SRX Series device supports the CoS-based IPsec VPNs with multiple IPsec SAs feature. You are asked to configure CoS for this tunnel.

Which two statements are true in this scenario? (Choose two.)

The local and remote gateways do not need the forwarding classes to be defined in the same order.

A maximum of four forwarding classes can be configured for a VPN with the multi-sa forwarding-classes statement.

The local and remote gateways must have the forwarding classes defined in the same order.

A maximum of eight forwarding classes can be configured for a VPN with the multi-sa forwarding-classes statement.

30. The exhibit shows part of the flow session logs.

Which two statements are true in this scenario? (Choose two.)

The existing session is found in the table, and the fast path process begins.

This packet arrives on interface ge-0/0/4.0.

Junos captures a TCP packet from source address 172.20.101.10 destined to 10.0.1.129.

Destination NAT occurs.

Page 4 of 4

31. You have deployed automated threat mitigation using Security Director with Policy Enforcer, Juniper ATP Cloud, SRX Series devices, Forescout, and third-party switches.

In this scenario, which device is responsible for communicating directly to the third-party switches when infected hosts need to be blocked?

Forescout

Policy Enforcer

Juniper ATP Cloud

SRX Series device

32. Referring to the exhibit,

Which two statements are correct about the NAT configuration? (Choose two.)

Both the internal and the external host can initiate a session after the initial translation.

Only a specific host can initiate a session to the reflexive address after the initial session.

Any external host will be able to initiate a session to the reflexive address.

The original destination port is used for the source port for the session.

33. You are using ADVPN to deploy a hub-and-spoke VPN to connect your enterprise sites.

Which two statements are true in this scenario? (Choose two.)

ADVPN creates a full-mesh topology.

IBGP routing is required.

OSPF routing is required.

Certificate-based authentication is required.

34. You want to create a connection for communication between tenant systems without using physical revenue ports on the SRX Series device.

What are two ways to accomplish this task? (Choose two.)

Use an external router.

Use an interconnect VPLS switch.

Use a secure wire.

Use a point-to-point logical tunnel.

35. An ADVPN configuration has been verified on both the hub and spoke devices and it seems fine.

However, OSPF is not functioning as expected.

Referring to the exhibit, which two statements under interface st0.0 on both the hub and spoke devices would solve this problem? (Choose two.)

interface-type p2mp

dynamic-neighbors

passive

interface-type p2p

36. You have deployed an SRX Series device at your network edge to secure Internet-bound sessions for your local hosts using source NAT. You want to ensure that your users are able to interact with applications on the Internet that require more than one TCP session for the same application session.

Which two features would satisfy this requirement? (Choose two.)

address persistence

STUN

persistent NAT

double NAT

JN0-637 Security, Professional (JNCIP-SEC) Exam Dumps

JN0-637 Security, Professional (JNCIP-SEC) Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts