D-PSC-MN-01 Dell PowerScale Maintenance Exam Dumps

dumps2024-11-20T10:48:04+08:00

The Dell PowerScale Maintenance certification is one for IT professionals specializing in PowerScale hardware and its implementation. D-PSC-MN-01 exam dumps can serve as a valuable resource for candidates looking to solidify their understanding of the exam topics, including hardware concepts, maintenance, installation, and implementation. These D-PSC-MN-01 dumps often include real-world scenarios and detailed questions that reflect the structure of the actual exam, providing a practical way to test your knowledge and identify weak areas. Free Dell PowerScale Maintenance D-PSC-MN-01 exam dumps are available below.

Page 1 of 4

1. A customer notices a platform engineer intentionally leaving a 1U gap underneath a Dell PowerScale H400 chassis during racking and stacking What is the purpose of the gap?

Backend Ethernet switch

Cable management tray

Location to install archive nodes

Required blanking panel for node separation

2. Which cluster interface provides the most detailed network traffic statistics and enables file and directory operations on the cluster?

Web console

Serial console

Platform API

CLI

3. A platform engineer is connecting a new Dell PowerScale F600 node to the frontend switch in an existing cluster with legacy nodes.

How should the network cables be connected?

From the PCIe slot 1 to the frontend Ethernet switch

From the PCIe slot 3 to the frontend Ethernet switch

From the PCIe slot 1 to the frontend InfiniBand switch

From the PCIe slot 3 to the frontend InfiniBand switch

4. A platform engineer connected to a Dell PowerScale F600 node using a serial connection. The session is unresponsive.

What action must the engineer take?

Restart the server using the front panel power button.

Check the settings of the serial connection.

Replace the serial cable with a new one.

Update the node firmware to the latest release

5. DRAG DROP

A platform engineer is creating a Dell PowerScale cluster using the Configuration Wizard. They have selected the Create a new cluster option.

What Is the correct sequence of steps to create the cluster?

6. A platform engineer must replace a failed chassis on a Dell PowerScale Gen6 cluster.

What must the engineer do after powering off the nodes?

Remove the drive sleds, label them for identification, and place the drive sleds In the newly installed chassis.

Remove the drive sleds and motherboard and transfer them to the new chassis.

Remove the drives and compute modules and reimage each drive before installing them in the chassis.

Remove the drives, install the chassis, and place the drives in the new chassis.

7. Dell Technical Support has requested a part be sent back to Dell Logistics to be studied.

Which process or document musi be completed before sending the part back?

WWFA

DTFA

DMR

CDMR

8. What must be enabled in SMB to ensure nondisruptive upgrades?

SMB multichannel

SMB encryption

SMB direct

SMB continuous availability

9. Windows clients cannot connect using the fully qualified domain name when testing the connectivity of a newly created cluster.

What connection test identifies the problem?

DNS

NFS Mount

Mapping a Windows drive

WebUI using IP address

10. An engineer runs ini_reformat_node command.

What are they attempting to do?

Reformat the mirrored FEC data.

Reformat a node quickly to repurpose a node.

Reformat the mirrored journals.

Reformat a node to securely erase all data.

Page 2 of 4

11. An existing PowerScale cluster consists of four A300 and three F600 nodes.

What is the minimum number of nodes an engineer can add to expand both node pools?

txA300 2xF600

2xA300 2xF600

3xF600 4xA300

2xA300 1x F600

12. What type of upgrade on a Dell PowerScale cluster requires the least amount of time?

Simultaneous

Parallel

Rolling

Automatic

13. Refer to the exhibit.

An engineer replaced the drive in C1. They run the isi devices drive list command and obtain the output that is shown.

What action must the engineer take?

Run the 1 = 1 devices drive add c1 command.

Run the isi devices drive format C1 command.

Contact Dell support.

Update the drive firmware.

14. What is the isi diagnostics gather command used for?

Diagnose the CP

Diagnose the TPM

Gather performance data.

Gather cluster logs

15. Which model is a part of the Isilon Gen6 platform?

F600

F810

F900

F200

16. What is done with the components when a Gen6 single node is replaced?

Transferred to the new node

Returned to Dell

Sent to WWFA

17. What does a terracotta colored handle indicate on Dell PowerScale Gen6 hardware?

The FRU must be replaced.

The node can remain online when replacing a hardware component.

The node must be shut down for maintenance procedures.

The component must not be removed while hardware is online.

18. What is the rack size of an F600 node?

19. What type of NIC can be used for the external network on a Dell PowerScale F600 node?

1/10 GbE

10/100 GbE

10/25 GbE

25/40 GbE

20. Which resource should be consulted before performing any Dell PowerScale platform maintenance activities?

Dell SolVe Online

Dell Technical Support

Dell iDRAC Service Module

OneFS logs and error messages

Page 3 of 4

21. Which two backend switches support 100 GbE?

A. DCS-7308

B. S5232-ON

C. 29264-ON

D. D4040

22. What must be replaced at the same time the backup battery is replaced?

2 card and backup battery

Both NIC cards

Riser card

23. An engineer replaced a failed node in a PowerScale H500 due to hardware issues. They must verity that the replacement node is functioning correctly.

What is a crucial step when replacing the failed node in the cluster?

Run a diagnostic test on the replacement node.

Confirm that the replacement node inherits the old serial number from the cluster.

Verify the size of the storage capacity of the replacement node.

Power on the replacement node and ensure it connects to the network without any problems.

24. What status is an engineer trying to test if they run the isi_hwmon -s command?

A. DIMM

B. Sensor

C. CPU

D. Battery

E. System

25. A platform engineer must install several Dell PowerScale clusters.

Which rack should they use for the A3000 nodes?

Titan-HD

Titan-D

Titan-P

26. Which port slot provides management functionality on a PowerScale F600?

PCle slot 3

PCle slot 1

rNDCstot

PCle slot 2

27. DRAG DROP

What Is the correct order of steps to Install a PowerScale Gen6 in a rack?

28. Exhibit.

A platform engineer has connected power cables to a Dell PowerScale Gen6 node.

What does the status indicator indicate?

Not functioning

Cold and redundant

Mismatch of voltage or component firmware

On and healthy

29. A platform engineer does not have a Flash drive available.

How can they reimage a Dell PowerScale node?

Copy the OneFS install file to the node and run the isi_reimage command.

Copy the OneFS install file onto CD and install from C

Use a serial connection to run the installation from a laptop.

Copy the OneFS install file to the node and run the isi diskutil command.

30. What type of drive should a customer use to ensure that their data is encrypted?

A. NVMe

B. SSD

C. SED

D. Hard drive

Page 4 of 4

31. What can be viewed using the isi_upgrade_logs _s command?

A. Post upgrade errors

B. Current upgrade state

C. Active upgrade errors

D. Upgrade assessment results

D-PSC-MN-01 Dell PowerScale Maintenance Exam Dumps

D-PSC-MN-01 Dell PowerScale Maintenance Exam Dumps

Share this post

Related Posts