FCP_FWF_AD-7.4 FCP - Secure Wireless LAN 7.4 Administrator Exam Free Dumps - Free Latest Dumps for IT Certification Exams

FCP_FWF_AD-7.4 FCP – Secure Wireless LAN 7.4 Administrator Exam Free Dumps

dumps2025-01-11T09:59:06+08:00

dumps Fortinet FCP - Secure Wireless LAN 7.4 Administrator FCP_FWF_AD-7.4 exam, FCP_FWF_AD-7.4 exam dumps

FCP – Secure Wireless LAN 7.4 Administrator FCP_FWF_AD-7.4 exam is the elective test for FCP in Network Security certification, which validates your ability to secure networks and applications by deploying, managing, and monitoring Fortinet network security products. There are 30 multiple choice questions in real Fortinet FCP_FWF_AD-7.4 exam, and you have 60 minutes to answer all the questions. The available language is English. The pass or fail score report is available in your Pearson VUE testing center. We provide the latest FCP – Secure Wireless LAN 7.4 Administrator FCP_FWF_AD-7.4 exam dumps, which are valuable in your preparation. Free FCP – Secure Wireless LAN 7.4 Administrator FCP_FWF_AD-7.4 exam dumps are available below.

Page 1 of 5

1. What is the primary function of FortiPlanner in wireless network planning?

Managing FortiAP devices

Configuring wireless security policies

Predictive modeling for wireless network coverage

Real-time monitoring of wireless traffic

2. What is the first step in troubleshooting client connection issues on a wireless network managed by FortiGate?

Check the SSID broadcast settings

Analyze packet captures

Verify VLAN configurations

Review the client’s signal strength

3. What functionalities can be achieved using FortiAP profiles?

Deploying advanced wireless settings

VLAN configuration for each SSID

FortiAP load balancing

Client connection rules with advanced bridge mode

4. Which command is used to monitor wireless client traffic on a FortiGate device?

diagnose wireless-controller wlac -d Sta

get system wireless client

execute wireless-controller client-status

monitor wifi-client traffic

5. Which tools might be useful when troubleshooting wireless performance issues?

RF spectrum analyzer

Packet capture analyzer

DHCP lease tracker

Encryption key generator

6. In a scenario where multiple SSIDs are broadcasting on a FortiAP device, how would you ensure that a specific SSID is associated with a particular network segment?

Using the FortiGate guest management feature.

By configuring VLANs on SSIDs.

Using advanced bridge mode options.

Through FortiAP and client load balancing.

7. Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.

True

False

8. The suppression of rogue APs is essential because:

It helps in allocating IP addresses efficiently.

It prevents Wi-Fi signal interference.

It ensures authorized APs get more bandwidth.

It aids in stopping potential security threats.

9. To achieve centralized management of multiple FortiAP devices, one would most likely use:

FortiPlanner

FortiGate integrated wireless controller

FortiPresence analytics

Directly via each FortiAP's web interface

10. Which actions can be taken to provision and manage FortiAP devices using the FortiGate wireless controller? (Select all that apply)

Create and apply FortiAP profiles

Enable SSID hiding

Configure advanced wireless settings

Implement VLAN load-balancing

Page 2 of 5

11. Which configuration would enable the most reliable wireless connectivity for the remote clients?

Configure a bridge mode wireless network and enable the Local authentication configuration option

Configure a tunnel mode wireless network and enable split tunneling to the local network

Install supported FortiAP and configure a bridge mode wireless network

Configure a bridge mode wireless network and enable the Local standalone configuration option

12. Which of the following tools are associated with predictive modeling or analytics?

FortiPlanner

FortiPresence

FortiGate

FortiAP Cloud

13. What type of server roles does the FortiPresence VM require to operate on-premises? (Choose two.)

Infrastructure server

Terminal server

Application server

Authentication server

14. Which FortiGate feature can be configured to automatically suppress detected rogue APs?

VLAN segmentation

WIDS profiles

SSID hiding

Advanced bridge mode options

15. What factors should be considered when troubleshooting FortiGuard issues? (Select all that apply)

DNS resolution for FortiGuard servers

Active FortiGuard subscription status

Firewall rules that may block FortiGuard updates

Time synchronization between FortiGate and NTP servers

16. Which tool is most useful for gathering information about wireless network performance issues on FortiGate?

FortiAP Cloud

RF spectrum analyzer

FortiPresence

FortiPlanner

17. How can you find upstream and downstream link rates of a wireless client using FortiGate?

On the FortiAP CLI, using the cw_diag ksta command

On the FortiAP CLI, using the cw_diag -d sta command

On the FortiGate GUI, using the WiFi Client monitor

On the FortiGate CLI, using the diag wireless-controller wlac -d Sta command

18. Which two statements are true about AP profiles? (Choose two.)

AP profiles are model specific.

A profile must be applied manually to an AP before it can be managed by FortiGate.

An AP must be authorized before having a profile applied.

A FortiAP profile must be applied to a FortiAP group.

19. Why might a client have difficulty connecting to an SSID broadcasting on 5 GHz, but not on 2.4 GHz?

The AP's location is unsuitable

Limitations of the client device's radio

DHCP server issues

Encryption mismatch issues

20. A tunnel mode wireless network is configured on a FortiGate wireless controller.

Which task must be completed before the wireless network can be used?

Security Fabric and HTTPS must be enabled on the wireless network interface

The wireless network interface must be assigned a Layer 3 address

The wireless network to Internet firewall policy must be configured

The new network must be manually assigned to a FortiAP profile.

Page 3 of 5

21. You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.

Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

22. You have just authorized a newly added FortiAP device on FortiGate. It went offline for an extended time without coming back online again.

What troubleshooting process must you take to bring FortiAP back online?

Access FortiAP management using HTTPs.

Verify that communication between FortiAP and the wireless controller is not blocked.

Restart the wireless controller if it is unresponsive for the newly added FortiAP device.

Check the power feed to the FortiAP device and PoE status if powered by a switch.

23. Which of the following features distinguishes FortiPresence from FortiPlanner?

FortiPresence is used primarily for network threat detection.

FortiPresence provides analytics solutions.

FortiPlanner is used as a wireless controller.

FortiPlanner is a cloud-based deployment tool.

24. Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the A

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

25. Which of the following are considered wireless security options?

WPA3 encryption

Rogue AP scanning

Firmware updating

SSID hiding

26. What configurations can be applied through FortiAP profiles to manage FortiAP devices? (Select all that apply)

Advanced wireless settings

SSID hiding

VLAN configurations

Client load balancing

27. As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Set the wireless controller country setting

Create a custom AP profile

Preauthorize APs

Create wireless LAN specific policies

28. When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Hardware security token authentication

Short message service authentication

Software security token authentication

Social networks authentication

29. WIDS profiles are primarily used for:

Deploying firmware updates to APs.

Wireless Intrusion Detection System configurations.

Enhancing Wi-Fi signal strength.

Assigning IP addresses to wireless clients.

30. Part of the location service registration process is to link FortiAPs in FortiPresence.

Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)

AP Manager

FortiAP Cloud

FortiSwitch

FortiGate

Page 4 of 5

31. Which of the following options are considered wireless security measures?

WPA3 encryption

Rogue AP scanning

Firmware updating

SSID hiding

32. What is the purpose of configuring WPA3 encryption on a wireless network?

To improve wireless signal strength

To provide strong security for wireless communications

To enable load balancing for wireless clients

To manage guest accounts on the network

33. What might cause poor performance in a wireless network? (Select all that apply)

High client density on a single AP

RF interference from neighboring devices

Incorrect VLAN assignments

Overlapping SSID broadcasts

34. What are the benefits of using FortiPresence analytics in a wireless network? (Select all that apply)

Monitoring and suppressing rogue APs

Gaining insights into user behavior and footfall patterns

Enhancing wireless signal strength

Providing real-time data for decision-making

35. What is the main advantage of deploying FortiAP devices using FortiAP Cloud?

Direct access to FortiGate configurations

Enhanced threat analytics and monitoring

Simplified deployment and centralized management

Predictive modeling capabilities for network expansion

36. A company requires a secure wireless network to span several adjacent buildings. Employees need seamless roaming access across buildings, floors, and, potentially, outdoor areas. FortiAP devices will be used.

Which deployment is the most scalable, manageable, and cost-effective in this scenario?

Install FortiWiFi with a cellular modem in the buildings and areas where no wireless signal reaches from the main building.

Deploy a WAN connection on each building to allow FortiAP devices to communicate with FortiGate in the main building.

Implement a wireless mesh design to allow FortiAP devices to use neighboring FortiAP devices to connect with FortiGate in the main building.

Configure FortiGuard-capable FortiAP devices to broadcast the corporate SSID without being managed by FortiGate in the main building.

37. Which command is used to enable WIDS profiles on a FortiGate device?

config wireless-controller wids

config wlan wids-profile

config firewall wids

config wifi wids

38. For protecting against wireless network intrusions, you would configure:

WIDS profiles.

Wi-Fi signal boosters.

DHCP options.

Bandwidth management profiles.

39. What is the primary function of FortiPlanner?

Wireless network threat analysis

Predictive modeling for wireless network planning

FortiGate device configuration

Management of FortiAP devices

40. Which option is used to configure connection rules between the wireless and wired network on a FortiAP device?

VLAN configurations

FortiGate guest management

FortiAP load balancing

Advanced bridge mode options

Page 5 of 5

41. In an environment where multiple SSIDs are broadcasted, how can you segregate network traffic for better management?

Deploy advanced wireless settings.

Configure FortiAP profiles.

Use VLANs on SSIDs.

Provision guest accounts on each SSI

42. VLAN load-balancing features are designed to:

Create guest accounts for the network.

Enhance wireless signal strength.

Distribute traffic across multiple VLANs efficiently.

Secure wireless traffic using encryption.

43. To ensure that traffic from different wireless clients is efficiently balanced among several access points in a high-density environment, you would primarily:

Configure VLANs on each SSI

Enable advanced bridge mode.

Use the FortiGate guest management feature.

Configure FortiAP and client load balancing.

44. In the context of wireless security, SSID hiding:

Helps in boosting Wi-Fi signal strength.

Allows APs to automatically detect and connect to each other.

Makes the network invisible to casual scanning by devices.

Enables the AP to detect rogue APs.

45. What steps are necessary for provisioning and managing FortiAP devices using a FortiGate integrated wireless controller? (Select all that apply)

Create and apply a FortiAP profile

Assign a VLAN to each SSID

Configure a tunnel mode for all wireless networks

Preauthorize APs on the FortiGate

FCP_FWF_AD-7.4 FCP – Secure Wireless LAN 7.4 Administrator Exam Free Dumps

FCP_FWF_AD-7.4 FCP – Secure Wireless LAN 7.4 Administrator Exam Free Dumps

Share this post

Related Posts