CTS Certified Technology Specialist Exam Free Dumps

dumps2025-01-23T09:10:50+08:00

CTS Certified Technology Specialist exam is easy to pass. Learning CTS exam information is a first step for you to study. There are 110 questions in real Certified Technology Specialist exam (10 of which are non-scoring pilot questions), and you have 150 minutes to answer all the questions. The CTS exam is available in English, Spanish, and German. The passing score is equal to 350. We provide the latest Certified Technology Specialist CTS exam dumps, which are valuable for you to pass the test easily. Free Certified Technology Specialist CTS exam dumps are available below.

Page 1 of 6

1. Refer to the exhibit.

According to the Gantt chart pictured, the Project Manager should wait to start Activity C until which predecessor has been reached?

Week 3

Week 4

Activity B

Milestone X

2. As part of a service agreement offering, wfwt PRIMARY role do preventive maintenance visits (PM/PMV) play?

allows the AV provider to clean, service and assess equipment In the field on a regular basis

allows the AV provider to check in with customer and serves as an opportunity to sell further solutions

allows the AV provider to sell a service that is often forgotten by the customer, and therefore generate greater profit

allows the AV provider access to client premises and scope future work

3. Which frequencies are amplified by a subwoofer?

lowest

mid-low

mid-high

highest

4. HOTSPOT

Which section of the Ohm's Law chart should be used to calculate values expressed in Ohms? Select the answer by clicking anywhere within the correct quadrant.

5. When doing a site survey, it is MOST IMPORTANT to consider the client's

budget.

timeline.

expectations.

knowledge of technology.

6. As the height of a character increases on a display.

legibility increases.

legibility decreases.

brightness increases.

brightness decreases.

7. Assuming that the speakers in the picture on the LEFT are 8 Q drivers, what is the impedance of the speaker system on the left?

16 Q

8. During a routine service visit, an engineer notices an LED indicator on a projector's front panel blinking regularly.

What should be done?

consult the projector's manual

replace the projector's lamp and filters

disregard because the projector is operational

remove the power cable and re-boot the projector

9. When connecting a condenser microphone, what MUST be included in die system design for it to operate?

mixer

stand

transmitter

power source

10. When creating an estimate for a request for proposal (RFP), what is the FIRST tiling that should be done?

obtain the costs

create the submittal

schedule a site visit

read the project description

Page 2 of 6

11. Network Quality of Service (QoS) is defined as

the ability to prioritize the traffic in the network system.

the ability to set the quantity of stations connected via the network.

the ability to remotely manage network switches, routers and hubs via the network connection.

a feature allowing the network administrator to monitor who is connected to the network at any given time.

12. A saeen is 144 in (3658 mm) wide and the throw ratio is 2.3:1.

How far from the screen should the projector be placed?

288 In (7303 mm)

302 in (7681 mm)

331 in (8413 mm)

446 in (11339 mm)

13. Which method of control is supported by HDBaseT?

PCIE

DAU

RS-232

DMX512

14. During project delivery and after completion, it is important to ensure correct management of control system code so that

programming costs will be within project budget.

other contractors are unable to reuse or edit code.

the most up-to-date version of code is available for upload when required.

sub-contract programmers submit uncompiled code as per their contract of employment.

15. Assuming a 10' (3 m) ceiling, what is the approximate volume of this room?

300 cubic ft (8.5 m3)

600 cubic ft (17 m3)

1500 cubic ft (42.5 m3) o

6000 cubic ft (162 m3)

16. The BEST way to ensure that a project is on budget is to

calculate the number of calendars days remaining to completion.

visit the job site and determine the percentage of work completed.

ask the installation team to estimate remaining work to completion.

review accrued labor and material costs against remaining work.

17. Maintaining AV operations includes which of the following?

conforming to DISCAS

measuring system SPL

updating control system firmware

comparing NAG and PAG calculations

18. How frequently should a personal fall arrest harness be inspected?

weekly

before each use

at the beginning of each project

at the beginning of each work day

19. When discussing a proposed audiovisual project with a new customer, it is important for the salesperson to FIRST

conduct a survey of end users to determine the project goals.

prepare a detailed layout of the equipment and cabling requirements.

identify the key decision makers and stakeholders in the client's organization.

consult with the project manager to determine the availability of staff to complete the installation.

20. Project documentation states the system must logically Isolate control and media networks.

What piece of network equipment should be used?

router

access point

managed switch

unmanaged switch

Page 3 of 6

21. To help end users remember key points of the training, the training documentation should include

equipment datasheets.

a customized quick start guide.

user manuals for each piece of equipment.

instructions for maintaining system input devices.

22. When an audio device can no longer accurately reproduce the audio signal, It is called

feedback.

dithering.

distortion.

saturation.

23. Which kind of drawing should a technician refer to in order to determine how to hang a loudspeaker line array?

detail

section

elevation

reflected ceiling plan

24. During the site survey, the client indicates that the space that will become a rear projection room is currently an off-white color.

What should be recommended to the client?

paint the room gray

paint the room black

leave the room as it is

use carpeting on the walls

25. During an initial customer visit, it is important to determine whether or not one is

going to get the job.

being competitive enough.

meeting with the decision maker.

going to have enough cable in stock to do the job.

26. The contrast control sets the

white balance of the Image.

range for the hue of the image.

color temperature of the image.

range for the difference between white and black.

27. The circuit on the RIGHT is an electrical drawing of what type of speaker system?

series circuit

constant voltage

stereo pair circuit

combination parallel/series circuit

28. When planning to use audio equipment on a converged enterprise network, it may be desirable to separate broadcast domains in order to

avoid audio feedback between devices.

avoid crosstalk between multi track channel packets.

avoid delaying time sensitive AV traffic on the network.

comply with local electrical and telecommunication regulations.

29. An application requires Its equipment to be operational 24 hours a day and the owner considers the system mission critical.

What type of warranty would be BEST for the equipment?

limited warranty

implied warranty

manufacturer's factory warranty

advanced replacement warranty

30. A client has ordered a large project from a company. This project has several critical components and a fixed schedule.

Which of the following will be VITAL for ensuring that the company meets the deadlines?

proper job costing

confirming lead times

qualifying the customer

confirming price changes

Page 4 of 6

31. Before confirming an anticipated completion date with the customer, it is MOST important to

double check the floor finishes.

ensure the date is not a holiday.

ensure no components are backordered.

create the system maintenance schedule.

32. Which of the following is addressed within the Needs Analysis part of the AV Design process?

creating the project timeline

outlining project Bill of Materials

identifying key stakeholders for the project

identifying functional requirements of the project

33. What is the MAIN difference between OLED displays and LED displays?

luminosity

higher brightness

self-emitting light source

determined screen shape

34. During a site survey of a facility to be upgraded or modernized, it is important to check wireless microphones that may be redeployed to ensure

battery types conform to environmental concerns.

polar patterns will not clash with new fabric treatments.

microphones are operating on acceptable radio frequencies.

antenna design will not interfere with HDBaseT signal distribution system.

35. When calibrating a loudspeaker system, which weight setting on the SPi. meter is used for its mdus>on of low frequency sound levels in the measurement?

Weighted

36. A client has ordered a large LED video wall to be installed in an existing board room.

What should be the integrator's MAIN operational concerns?

power and temperature

brightness and contrast

aspect ratio and resolution

cable management and length

37. Assuming that the screen and projector are both Ethernet controllable devices, where does the control system for the AV solution need to exist?

connected to the network

in the rear projection room

in a dedicated rack in the room

above the projector, plugged into the serial port on the projector

38. Your client has requested a 50inch monitor be mounted on the south wail of this boardroom.

Which two recessed lights will need to be separated into the r own zone in order to turn them off when the monitor is on?

39. What is the name for a written, non-technical narrative that explains system functionality?

needs analysis

program report

service manual

performance verification

40. Knowledge of the overall room function as envisioned by the client provides a

budget range for the project.

design concept to give to the architect.

list of major system components for the space.

starting point for determining the space AV needs.

Page 5 of 6

41. A loud hiss is coming from the audio system. This is MOST LIKELY caused by

fluorescent lighting.

poor gain structure.

phase cancellation issues.

the microphones being off.

42. On a construction project awarded through a competitive process, the electrical contractor says that the AV company is responsible for the installation of conduit.

What project document(s) would determine responsibility?

estimate

submittals

proposal cover letter

bid (tender) documents

43. Reverberant sound reaches the listener's ears

after

before

synchronized with D at the same level as the direct sound.

44. One MAIN benefit of multicast over unicast in a network AV solution is it

supports multi-channel audio.

supports higher video resolutions.

reduces network bandwidth when using multiple encoders.

reduces network bandwidth when using multiple decoders.

45. What is the document that shows project tasks, indicating their allocated time, dependencies, and relationships between activities?

flow chart

Gantt chart

needs analysis

Venn diagram

46. An event planner for a banquet surrounding a swimming pool has requested that the pool be lit in the client’s colors using underwater lighting.

What does the technician need to consider?

the IP rating of the fixtures

access to a grounded power supply

whether the installing technicians are PADI certified

the ability to physically secure the fixtures underwater

47. Which of the following project management activities coordinates project requirements and resources?

project budget

logic model timeline

logic network diagram

project kick-off meeting

48. Which type of contract involves ongoing support for an AV system, regardless of the age of the facility or who did the initial installation?

system warranty

service agreement

manufacturer warranty

preventive maintenance

49. A task cannot begin before another task is completed.

How is this described in a project task schedule?

requirement

dependency

consequence

determination

50. For a design-bid (tender)-build project, the final step for determining the owner's costs for an AV system is

selecting an Integrator.

performing a needs analysis.

having the owner approve the design.

ensuring the equipment specification isreadyforbid.

Page 6 of 6

51. What is the BEST way to manage a campus-wide AV system deployment?

service level agreement

on-site monitoring checks

remote monitoring solution

stand-by stock of equipment

52. What would be the BEST way to verify proper performance of a CAT cable fitted with a new termination?

use a cable tester and run a protocol

use a multimeter to test if the pins have a connection

connect the cable to a reference unit to check against it

connect the source and sync, then verify there is a picture

53. Which of the following translates the IP address of a computer in a local network to a single IP address?

HTTP

MAC

NAT

TCP

54. What is the aspect ratio in these images?

1.33:1

4:3

5:4

16:9

55. Which of these cables should be used for a balanced microphone signal?

56. In order to mount a projector so that it is horizontally centered with the suspended screen, the technician should look at which drawings in the plans?

detail

sections

elevations

reflected ceiling

57. The MAIN benefit of an inventory tracking system in an AV rental and staging business is having an accurate record of

customers contact details.

current resale value of assets.

current state and commitments of assets.

customer’s budgets and spending history.

58. Which section of a program report describes the probable costs of an AV project?

budget

needs analysis

systems descriptions

infrastructure requirements

CTS Certified Technology Specialist Exam Free Dumps

CTS Certified Technology Specialist Exam Free Dumps

Share this post