VMware VCP-NV 2021 2V0-41.20 Exam Dumps

dumps2021-12-30T01:52:54+08:00

VMware VCP-NV 2021 2V0-41.20 exam dumps are available, which are good material for you to take the test. In real VMware certification 2V0-41.20 exam, there are 70 questions, and you have 135 minutes to complete all the questions. The required passing score of VMware 2V0-41.20 exam is 300. The exam format is Single and Multiple choice, proctored. Free VMware VCP-NV 2021 2V0-41.20 exam dumps are available below.

Page 1 of 3

1. An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.

Which CLI command disables the nsxcli time out value on NSX Manager?

set cli-timeout 0

set cli-timeout enabled

set cli-timeout disabled

set cli-timeout 1

2. Which tool could be used to inspect the path of a packet in the data plane?

Port Connection

Port Mirroring Session

Netflow

Traceflow

3. An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.

Which two NAT rule types are supported for this configuration? (Choose two.)

Port NAT

Source NAT

Destination NAT

1:1 NAT

Reflexive NAT

4. Which command is used to change the NSX CU administrator password?

set user admin password <password> old-password <old-password>

set user admin password <old-password> <new-password>

set user administrator password <old-password> <new-password>

set user administrator password <password> old-password <old-password>

5. Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

Route Aggregation

Route Distribution

Graceful Restart

BGP Neighbors

Local AS

6. Which CLI command shows syslog on NSX Manager?

show log manager follow

get log-file auth.log

get log-file syslog

/var/log/sysloq/syslog.log

7. Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

virsh start <NSX-Manager-ID>

virsh poweron <nsx-manager-ID>

virsh start <NSX-Manager-Name>

virsh poweron <nsx-manager-name>

8. An NSX administrator has deployed an NSX Edge on a bare-metal server.

Which command registers the NSX Edge with the NSX Manager?

join management-cluster <nsx-cluster-IP> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>

join cluster <nsx-cluster-IP> username root password <root-password> thumbprint <nsx-manager―thumbprint>

join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>

join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>

9. Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)

esxcfg-nics -1

net-dvs

esxcli network nic list

esxcfg-vmknic -1

esxcli network ip interface ipv4 get

10. When running nsxcli on an ESXi host, which command will show the Replication mode?

get logical-switch <Local-Switch-UUID> status

get logical-switch <Logical-Switch-UUID>

get logical-switches

get logical-switch status

Page 2 of 3

11. What are three NSX Manager roles? (Choose three.)

cloud

manager

zookeeper

policy

master

controller

12. Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?

/var/l og/hostd. log

/var/log/vmware/eam/eam.log

/var/log/esxupdate.log

/var/log/syslog.log

13. What are two supported N-VDS modes? (Choose two.)

DPDK Datapath

Overlay Datapath

Secure Datapath

Enhanced Datapath

Standard Datapath

14. An NSX administrator is creating a Tier-1 Gateway configured in Active-Standby High Availability Mode. In the event of node failure, the failover policy should not allow the original failed node to become the Active node upon recovery.

Which failover policy meets this requirement?

Non-Preemptive

Preemptive

Enable Preemptive

Disable Preemptive

15. A security administrator needs to configure a firewall rule based on the domain name of a specific application.

Which field in a distributed firewall rule does the administrator configure?

Profile

Source

Service

Policy

16. Which step must be performed before deploying an additional NSX Manager from the NSX-T UI?

Prepare the ESXi hosts as Transport Nodes.

Configure the Virtual IP of the cluster.

Create an Edge Cluster.

17. Where are Distributed Firewall logs containing access decisions stored?

NSX API

NSX Edge

NSX Manager

Hypervisor transport node

18. Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

SNAT

Reverse NAT

DNAT

1:1 NAT

19. What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)

policy-based IPSec VPN

Layer-7 based IPSec VPN

route-based IPSec VPN

Open source based IPSec VPN

SSL based IPSec VPN

20. Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

set service nsx-manager logging-level debug

set service nsx-manager log-level debug

set service manager log-level debug

set service manager logging-level debug

Page 3 of 3

21. When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

Create a secondary vNIC on each quest VM for SVM communication.

Place a partner SVM on each compute cluster node.

Centralize partner SVMs in a service cluster.

Add partner SVMs to an edge cluster.

22. What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?

Service interface

Loopback Router Port

Downlink interface

VLAN Uplink

23. An administrator has a requirement to have consistent policy configuration and enforcement across NSXT instances.

What feature of NSX-T Data Center fulfills this requirement?

Load balancer

Policy-driven configuration

Multi-hypervisor support

Federation

24. An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.

Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?

e1000

VMXNET2

VMXNET3

Flexible

25. How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

Automatically created when Tier-1 is created.

Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.

Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.

Automatically created when Tier-1 is connected with Tier-0 from NSX U

26. Which statement describes the VMware Virtual Cloud Network Vision?

Virtual Cloud Network connects and protects virtual machines running in KVM environments.

Virtual Cloud Network connects and protects virtual machines running in vSphere environments.

Virtual Cloud Network connects and protects applications, regardless of their physical locations.

Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.

27. Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

Multicast routing is implemented with PIM Sparse-Mode.

IGMP Snooping is used to populate multicast forwarding tables.

Tier-0 gateways can be the Rendezvous Point.

Multicast is supported in ESXi and KVM transport nodes.

An Edge can be the Rendezvous Point.

28. The NSX Control Plane is responsible for which two functions? (Choose two.)

receive and validate configuration from NSX Policy

host API services

propagate topology information

push stateless configurations to forwarding engines

maintain packet-level statistics

VMware VCP-NV 2021 2V0-41.20 Exam Dumps

VMware VCP-NV 2021 2V0-41.20 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts