Fortinet NSE 4 NSE4_FGT-7.0 Exam Replace NSE4_FGT-6.4

dumps2022-01-05T06:29:50+08:00

Fortinet NSE4_FGT-6.4 exam will be retired on March 31, 2022, and the new upgrade test is NSE4_FGT-7.0 Fortinet NSE 4-FortiOS 7.0. There are 60 questions in real Fortinet NSE 4 NSE4_FGT-7.0 exam, and you have 105 minutes to finish the test. The available languages are English and Japanese. Our online Fortinet NSE 4 NSE4_FGT-7.0 exam dumps questions are the best material for you to pass the test. Free Fortinet certification NSE4_FGT-7.0 exam dumps questions are below.

Page 1 of 2

1. Which two statements about FortiGate FSSO agentless polling mode are true? (Choose two.)

FortiGate uses the AD server as the collector agent.

FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

FortiGate does not support workstation check.

FortiGate directs the collector agent to use a remote LDAP server.

2. Refer to the exhibit.

Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)

There are five devices that are part of the security fabric.

There are 19 security recommendations for the security fabric.

Device detection is disabled on all FortiGate devices.

This security fabric topology is a logical topology view.

3. Which two statements are true about the FGCP protocol? (Choose two.)

Is used to discover FortiGate devices in different HA groups

Runs only over the heartbeat links

Elects the primary FortiGate device

Not used when FortiGate is in Transparent mode

4. Refer to the exhibits.

Exhibit A.

Exhibit B.

The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check.

Which interface will be selected as an outgoing interface?

port2

port3

port4

port1

5. When configuring a firewall virtual wire pair policy, which following statement is true?

Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.

Only a single virtual wire pair can be included in each policy.

Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.

Exactly two virtual wire pairs need to be included in each policy.

6. Refer to the exhibit.

Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)

The port3 default route has the lowest metric.

There will be eight routes active in the routing table.

The port1 and port2 default routes are active in the routing table.

The port3 default route has the highest distance.

7. By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.

Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?

set fortiguard-anycast disable

set webfilter-force-off disable

set webfilter-cache disable

set protocol tcp

8. Refer to the exhibits to view the firewall policy (Exhibit A) and the antivirus profile (Exhibit B).

Exhibit A.

Exhibit B.

Which statement is correct if a user is unable to receive a block replacement message when downloading an infected file for the first time?

The flow-based Inspection is used, which resets the last packet to the user.

The volume of traffic being inspected is too high for this model of FortiGate.

The firewall policy performs the full content inspection on the file.

The intrusion prevention security profile needs to be enabled when using flow-based inspection mode.

9. Which type of logs on FortiGate record information about traffic directly to and from the FortiGate management IP addresses?

System event logs

Security logs

Forward traffic logs

Local traffic logs

10. Which two statements about antivirus scanning mode are true? (Choose two.)

In proxy-based inspection mode, files bigger than the buffer size are scanned.

In flow-based inspection mode, files bigger than the buffer size are scanned.

In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the client.

In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client.

Page 2 of 2

11. An administrator has configured outgoing interface any in a firewall policy.

Which statement is true about the policy list view?

Interface Pair view will be disabled.

Search option will be disabled.

Policy lookup will be disabled.

By Sequence view will be disabled.

12. An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.

Which subnet must the administrator configure for the local quick mode selector for site B?

192.168.3.0/24

192.168.1.0/24

192.168.0.0/8

192.168.2.0/24

13. Refer to the exhibits.

Exhibit A shows system performance output.

Exhibit B shows s FortiGate configured with the default configuration of high memory usage thresholds.

Based on the system performance output, which two statements are correct? (Choose two.)

FortiGate will start sending all files to FortiSandbox for inspection.

FortiGate has entered conserve mode.

Administrators cannot change the configuration.

Administrators can access FortiGate only through the condole port.

14. Refer to the exhibits.

Exhibit A.

Exhibit B.

The SSL VPN connection fails when a user attempts to connect to it.

What should the user do to successfully connect to SSL VPN?

Change the SSL VPN port on the client.

Change the Server IP address.

Change the idle-timeout.

Change the Server IP address.

15. Refer to the exhibit.

An administrator is running a sniffer command as shown in the exhibit.

Which three pieces of information are included in the sniffer output? (Choose three.)

Interface name

IP header

Application header

Packet payload

Ethernet header

16. Refer to the exhibits.

Exhibit A.

Exhibit B.

An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric.

After synchronization, this object is not available on the downstream FortiGate (ISFW).

What must the administrator do to synchronize the address object?

Change the csf setting on Local-FortiGate (root) to set configuration-sync local.

Change the csf setting on ISFW (downstream) to set configuration-sync local.

Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.

Change the csf setting on ISFW (downstream) to set fabric-object-unification default.

17. Which engine handles application control traffic on the next-generation firewall (NGFW) FortiGate?

Intrusion prevention system engine

Detection engine

Flow engine

Antivirus engine

18. Which two statements are true about the Security Fabric rating? (Choose two.)

The Security Fabric rating is a free service that comes bundled with all FortiGate devices.

Many of the security issues can be fixed immediately by clicking Apply where available.

The Security Fabric rating must be run on the root FortiGate device in the Security Fabric.

It provides executive summaries of the four largest areas of security focus.

Fortinet NSE 4 NSE4_FGT-7.0 Exam Replace NSE4_FGT-6.4

Fortinet NSE 4 NSE4_FGT-7.0 Exam Replace NSE4_FGT-6.4

Share this post

Leave a Reply Cancel reply

Related Posts