C1000-175 Foundations of IBM Security QRadar SIEM V7.5 Exam Dumps

dumps2024-10-08T10:01:48+08:00

Foundations of IBM Security QRadar SIEM V7.5 C1000-175 exam is a required test for earning IBM Certified Associate – Security QRadar SIEM V7.5 certification. You will have entry-level knowledge and experience with QRadar SIEM V7.5 to get certified. There are 62 questions in the real IBM Certification C1000-175 exam, and you have 90 minutes to finish the test. The number of questions required to pass is 41. The available language is English. The C1000-175 exam cost is $200. We provide the latest IBM C1000-175 exam dumps, which can ensure you pass. Free Foundations of IBM Security QRadar SIEM V7.5 C1000-175 exam dumps are available below.

Page 1 of 4

1. Which of the following deployment options are available for QRadar?

On-premise only

Cloud-only

Hybrid (Cloud and On-premise)

Peer-to-peer network

2. Which feature distinguishes QRadar Network Insights (QNI) from QRadar Incident Forensics (QIF)?

QNI analyzes and enriches flow data in real-time.

QIF allows for replaying and analyzing past network traffic.

QNI requires direct access to the network hardware.

QIF focuses exclusively on flow data analysis.

3. Which type of rule is specifically designed to detect patterns over time rather than in single events or flows?

Anomaly detection rule

Behavioral rule

Threshold rule

Correlation rule

4. You need to use Ariel Query Language to select the default columns from events.

Which is the correct query?

SELECT % FROM events

SELECT * FROM events

SELECT ALL FROM events

SELECT defaultcolumns from events

5. What happens to custom DSMs when upgrading a QRadar system?

Custom DSMs are renamed during the upgrade.

Custom DSMs remain the same during the upgrade.

Custom DSMs are automatically updated to the latest version.

Custom DSMs are replaced with default DSMs during the upgrade.

6. What does the Parsing Status column in the Log Activity Preview of QRadar primarily show?

Raw event data from the workspace

The Event Mappings tab for configuring event IDs

Whether event properties are successfully mapping to QID records

Access to the event editing and property definition of the records

7. Which techniques are commonly used in SIEM systems for event correlation? (Choose Two)

Behavioral analytics

Rule-based detection

Quantum computing

Data loss prevention

8. How can an analyst use QRadar dashboards to proactively address potential security incidents?

By configuring the dashboard to display system uptime

By analyzing trends and patterns in security data visualization

By displaying the financial impact of potential breaches

By automating ticket generation for every displayed event

9. Which can be done from the Manage Search Results pane?

Cancel a search

Cancel a search group

Create a search group

Create a custom search

10. The QRadar "Event Correlation and Analytics" functionality identifies groupings of activities for investigation.

What are those groupings called in QRadar SIEM?

Alarms

Alerts

Offenses

Problems

Page 2 of 4

11. In a distributed QRadar environment, what is the primary purpose of having a high-availability (HA) configuration?

To increase data processing speed

To prevent data loss and ensure continuity of operations

To segregate sensitive data from less sensitive data

To provide geographically dispersed data storage

12. Advanced SIEM solutions use which of the following data sources for enhancing event correlation? (Choose Two)

Geolocation information

The content of encrypted traffic

Threat intelligence feeds

Historical security incident reports

13. Which two are prerequisites for external authentication providers?

Delete all users from the system.

Configure two-factor authentication for all your users.

Set up Azure Active Directory to send events to the QRadar log collector.

Configure the authentication server before you configure authentication in QRadar.

Ensure that all users have appropriate user accounts and roles to allow authentication with the vendor servers.

14. The basic use cases for QRadar Network Insights (QNI) versus QRadar Incident Forensics (QIF) often center on what distinguishing factors? (Choose Two)

The depth of analysis required

The type of data being analyzed

The real-time response capabilities

The historical data retention needs

15. Compliance management and reporting within a SIEM framework typically involve which of the following tasks? (Choose Two)

Real-time alerting on compliance violations

Providing detailed user access reports

Encrypting stored log data

Conducting automated vulnerability scans

16. Why is it significant to understand the three inspection levels in QNI?

To optimize the performance versus depth of analysis trade-off

To ensure data is encrypted at all layers

To facilitate compliance with international standards

To simplify the user interface experience

17. What are the two (2) main functions covered by the Log Activity tab in QRadar?

Configure Log Sources

Perform custom searches

Monitor events collection

Configure network devices

Trigger Log Source auto-detection

18. What is a key benefit of using QRadar's Report Wizard?

It automatically escalates cybersecurity threats.

It provides pre-defined templates for quick report setup.

It eliminates the need for data storage.

It configures network devices without manual intervention.

19. What happens if new events occur matching the rule for a closed offense?

A new offense is created.

The offense becomes active.

Historical correlation runs automatically.

The offense is not displayed in the search results.

20. Which of the following is a primary function of log management within SIEM systems?

Providing real-time visibility into network traffic

Storing logs in an unstructured format for ease of access

Normalizing log data from various sources for consistent analysis

Encrypting log data for secure storage

Page 3 of 4

21. Effective compliance management in SIEM systems supports which of the following objectives? (Choose Three)

Ensuring data is encrypted according to industry standards

Facilitating the generation of reports for regulatory audits

Providing real-time updates on compliance status

Automatically correcting non-compliant configurations

22. Which two properties are the magnitude rating of an offense based on?

Severity

Priority

Credibility

Accuracy

Offense correlation

23. The QRadar Assistant App helps users in which of the following ways? (Choose Two)

Streamlining the app installation process

Facilitating real-time threat analysis

Providing educational resources on QRadar

Offering a dashboard for app management

24. How should you describe the function of an installed app within QRadar's environment?

It extends the core capabilities of QRadar.

It replaces the default QRadar functionalities.

It decreases the overall system performance.

It consolidates log sources into a single channel.

25. Which of the following best describes the concept of log normalization in SIEM?

Converting logs into a standard format for analysis

Increasing the size of log files for better analysis

Encrypting logs to prevent unauthorized access

Storing logs in a decentralized manner to improve access speed

26. What is an essential first step in the data ingestion process within a typical security information and event management (SIEM) system?

Defining user permissions

Establishing data normalization rules

Selecting the archive location for data

Identifying the data source and format

27. Which chart in the Threat and Security monitoring dashboard lists the five top critical offenses, identified with a magnitude bar to inform you of the importance of the offense?

My Offenses

Most Recent Offenses

Most Severe Offenses

Most number of targets in an offense

28. Which of the following are valid tests that can be applied within a rule in a SIEM system?

Comparing field values against known threat intelligence

Testing for the presence of a specific string in log data

Checking the velocity of events against a baseline

Verifying the digital signature of events

29. Which three types of report formats can be generated by QRadar?

PDF

CSV

PPT

XLS

HTML

JPEG

DOC/DOCX

30. Which component is responsible for normalizing events to a common format in QRadar?

Event Processor

Flow Processor

Event Collector

QRadar Advisor

Page 4 of 4

31. QRadar rule types are differentiated based on what criteria?

The data source they analyze

The time frame they cover

The severity level they assign

The response action they trigger

32. Which action ensures that QRadar reports provide relevant and actionable intelligence?

Regularly updating the QRadar software version

Customizing reports to reflect the organization's specific security posture

Increasing the frequency of report generation

Reducing the number of included data sources

33. How does QRadar's event correlation engine enhance security operations?

By providing a graphical user interface

By reducing false positive alerts

By increasing the data storage capacity

By enabling remote access to logs

34. When considering QRadar's deployment in different environments, which factor is most crucial in determining the choice of appliances?

The geographical location of the organization

The organization's industry sector

The scale of the organization's IT environment

The preferred language for the user interface

35. Which QRadar appliance is specifically designed for log and event data storage and analysis?

QRadar Risk Manager

QRadar Network Insights

QRadar Data Node

QRadar Incident Forensics

36. Which of the following best describes the benefit of QRadar's modular architecture?

It facilitates easier software updates.

It enables better team collaboration.

It provides flexibility in deployment configurations.

It simplifies user access management.

C1000-175 Foundations of IBM Security QRadar SIEM V7.5 Exam Dumps

C1000-175 Foundations of IBM Security QRadar SIEM V7.5 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts