C_IBP_2302 SAP Certified Application Associate Exam Dumps

dumps2023-06-05T10:13:14+08:00

SAP Certified Application Associate C_IBP_2302 exam information is available for you to study. There are 80 questions in the real SAP certification C_IBP_2302 exam, and you have 180 minutes to answer all the questions. The required passing score for the SAP C_IBP_2302 exam is 60%. The available language is English. We have cracked the latest SAP Certified Application Associate C_IBP_2302 exam dumps, which are the best material for you to study all the related topics. Free SAP Certification C_IBP_2302 exam dumps are below.

Page 1 of 3

1. You created a key figure and want to add calculations.

Which of the following rules do you consider? Note: There are 2 correct answers to this question.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

The calculation chain for a key figure must always result in a calculated key figure.

Key figurescan be calculated across different planning levels.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

2. Where can the results of a Time Series Analysis be used? Note: There are 2 correct answers to this question.

During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app

In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs

In the Manage Forecast Error Calculations app C Demand Planning app to calculatethe Forecast Error CV

In the Microsoft Excel add-in, where you can use them to limit and filter your planning views

3. Model configuration allows the attributes of a master data type to be assigned as key figures.

Which features are relevant for this type of object?

This type of key figure is not usually stored and it cannot be set to editable.

This object is not exposed to the user in planning views or modeling.

This object contains user-definedcriteria that monitor the running of business plans.

This object provides a single value for a unique planning combination.

4. For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct answers to this question.

Purge Master Data

Create Time Periods for Time Profiles

Purge Key Figure Data

Purge Non-Conforming Data

5. Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct answers to this question.

The total number of attributes that can use subtotals in the planning view can be restricted.

The values of the attribute-based total at the highest attribute level in the planning level can be changed.

Only attribute-based totals can be added to the planning view.

The total value can be added before or after the selected attribute.

6. You are adding a value-based filter to a planning view.

Which of the following conditions apply? Note: There are 3 correct answers to this question.

You can only apply one value-based filter per planning view.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

These filters can be used together with attribute totals in the same planning view.

These filters are always applied based on the values stored in the database.

7. Which of the following are features of the S&OP process templates? Note: There are 2 correct answers to this question.

New instances of templates allow for re-use of the same processes.

All process templates are assigned to dashboards.

Each step depicted in the template can have tasks associated with it.

The S&OP process step can be started with an application job.

8. You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.

Which methods can you use? Note: There are 3 correct answers to this question.

Disaggregation according to a helper key figure

Proportional disaggregation by using KF2 in the expression

Disaggregation according to an equal split

Disaggregation according to a user-defined expression

Disaggregation in batch triggered by an application job

9. How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle? Note: There are 2 correct answers to this question.

Simulate heuristics run in Supply Reviewstage

Simulate statistical forecast at the Demand Review stage

Simulate demand sensing inputs for Supply Review

Model inventory turns based on Target Safety stocks

10. You need to make manual adjustments to your S&OP plan.

Which are possible ways of making these changes? Note: There are 2 correct answers to this question.

Using Microsoft Excel planning views

Leveraging the web-based planning capability

Leveraging the functionality of SAP Workzone

Using Driver-Based planning

Page 2 of 3

11. How many different time levels can be selected within one planning view?

Only base time levels of the planning area

All time levels available in the time profile

All time levels available in the time profile, restricted by global configuration parameter

Only time levels from the base planning level of selected key figures

12. You are working to realign the data due to a recent warehouse closure.

What should you be aware of in regards to the realignment steps settings? Note: There are 2 correct answers to this question.

The name of the realignment step should be no longer than 20 characters.

You must mark the realignment step as "shared" andassign the steps to users.

The number of steps in the realignment run is limited to 255.

A realignment step can change master data, planning objects and key figures.

13. The S&OP Operator Profiles app is used to configure different types of algorithms.

Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer? Note: There are 2 correct answers to this question.

Time profile level

Discretization

Processing mode

Global cost factors

14. You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.

Which settings can you change and still run a successful consistency check? Note: There are 2 correct answers to this question.

Add a new time profile level to the time profile.

Change the numbering hierarchy of the period IDs in the time profile.

Change the description of the attributes in the time profile.

Change the past and future horizon of the levels in the time profile.

15. You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.

Which of the following parameters can you model to plan production with extra shift(s)?

Capacity expansion with additional costs

Adjusted production interactive values

Incremental production values

Production source validity at the start of seasonal peak

16. What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct answers to this question.

Link two analytics charts.

Rename the charts.

Add process templates.

Display all assigned analytics on a single U

Use drill-down functionality.

17. What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?

Created as type NVARCHAR and assigned to an external master data type

Created as type INTEGER and assigned to a compound master data type

Created as type INTEGER and assigned to a simple master data type

Created as type DECIMAL and assigned to a compound master data type

18. Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

19. What are the S&OP operator (optimizer) parameters associated with demand fair share?

Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Inventory days of supply

Number of fair share segments Maximum days of coverage Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Maximum inventory

20. Forecast Error CV is an input to which of the following?

Time-Series-Based Supply Planning Optimizer

Calculate Target Inventory Components in Inventory Planning Profile Operator

Forecast Error Calculation in Inventory Planning Profile Operator

Multistage Inventory Optimization in Inventory Planning Profile Operator

Page 3 of 3

21. You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.

How can you resolve this problem? Note: There are 2 correct answers to this question.

Use the Data Integration app to load suitable data that creates the combinations

Use the Check Mode operator to create the combinations

Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel

Use the Manage Master Data app to create the combinations

22. A time profile is defined with these levels: day, technical week, week, month, quarter, and year.

What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

IF("PERIODID4" ="$$PERIODID4CU$$...)

IF("PERIODID2" ="$$PERIODID2CU$$...)

IF("PERIODID3" ="$$PERIODID3CU$$...)

IF("PERIODID5" ="$$PERIODID5CU$$...)

23. Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm? Note: There are 2 correct answers to this question.

Sales Order Quantities (both historical and future open orders)

Forecast Error CV Calculated by Manage Forecast Error Calculations app

Future Consensus Forecasts and Lagged Forecast Snapshots

Recommended Safety Stocks from Multistage Inventory Optimization

24. Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct answers to this question.

Violation of minimum resource utilization

Not adhering to maximum transport values

Not respecting production capacity

Violation of minimum aggregated inventory values

Not-fully satisfied demands

C_IBP_2302 SAP Certified Application Associate Exam Dumps

C_IBP_2302 SAP Certified Application Associate Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts