CFI-I Certified Fire Inspector I Exam Free Dumps

dumps2025-01-13T10:27:13+08:00

Certified Fire Inspector I CFI-I exam contains 100 multiple-choice questions, and you have 4 hours to complete all the questions. Certified Fire Inspector I CFI-I exam is based on the job performance requirements for Fire Inspector I as defined in Chapter 4 of the 2014 edition of NFPA 1031, Standard for Professional Qualifications for Fire Inspector and Plan Examiner. We provide the latest Certified Fire Inspector I CFI-I exam dumps, which can ensure you pass the test easily. Free Certified Fire Inspector I CFI-I exam dumps are available below.

Page 1 of 4

1. What is the minimum fire resistance rating for the enclosure of floor openings connecting four or more stories in new construction?

1 hour

1½ hours

2 hours

2½ hours

2. What is the maximum volume of Class I, Class II, and Class III A liquids allowed to be stored in an individual storage cabinet?

80 gal (303 L)

100 gal (379 L)

120 gal (460 L)

140 gal (530 L)

3. For flammable and combustible liquids, what is the number of control areas allowed on the 2nd floor above grade level of a building?

4. Which of the following is true regarding the copy of an issued permit?

It shall be readily accessible at each place of operation.

It shall be reissued upon completion of the project.

It shall be maintained by the architect of record.

It shall be transferable to a new address.

5. The authorization to issue permits is granted by the

state legislature.

authority having jurisdiction.

Fire Inspection Handbook.

NFPA 101, Life Safety Code.

6. A permit shall be required to store more than how many tires outside?

200

300

400

500

7. What is the maximum travel distance to a fire extinguisher with a 20-B rating for an ordinary (moderate) type hazard?

30 ft (9.14 m)

50 ft (15.25 m)

75 ft (22.86 m)

100 ft (30.48 m)

8. Which of the following methods are acceptable for serving a notice of violation on a responsible party of a non-abandoned property?

I. By email

II. By mail

III. Personal Service

IV. Posting on premise

I and II

II and III

II, III, and IV

I, II, III, and IV

9. The acceptance of a permit as defined in the fire code gives the authority having jurisdiction the right to enter the premises to inspect

with the permission of the owner.

on a quarterly cycle.

at reasonable times.

at any time.

10. Spray undercoating or spray body lining of vehicles shall be conducted a minimum of what distance from open flames or spark-producing equipment?

3 ft (914 mm)

5 ft (1,524 mm)

10 ft (3,048 mm)

20 ft (6,100 mm)

Page 2 of 4

11. Records regarding fire prevention inspections must include all of the following EXCEPT

a summary of violations found during the inspection

the date of the inspection

dates of the service of notices

photographs of code violations

12. In a low hazard occupancy, what is the maximum allowable travel distance to a Class A portable fire extinguisher?

30 ft (9.1 m)

50 ft (15.2 m)

75 ft (22.8 m)

100 ft (30.5 m)

13. What is the rating for an interior finish material with a flame spread index of 100?

Class A

Class B

Class C

Class D

14. Which of the following conditions must be considered when determining the spacing and location of smoke detectors?

I. Ceiling height

II. Detector sensitivity

III. Ambient environment

IV. Ventilation or airflow

I and IV

II and III

I, III, and IV

I, II, III, and IV

15. During an inspection, it is determined that the installation of a new suppression system is significantly different from the one approved during plans review.

What action should be taken by the inspector?

Issue a violation notice to the owner

Evaluate the installation for compliance

Require a submittal of a set of corrected plans

Indicate the modifications on the approved plan

16. What is the minimum fire protection rating for a fire door in a 2-hour fire resistance-rated assembly that protects a refuse chute?

½ hour

1 hour

1½ hours

2 hours

17. For the purpose of sprinkler design, a warehouse with moderately combustible contents stored to heights of 12 ft (3.6 m) is classified as an

Ordinary hazard (Group 1).

Ordinary hazard (Group 2).

Extra hazard (Group 1).

Extra hazard (Group 2).

18. What is the minimum acceptable flow at the base of the riser for a pipe-schedule sprinkler system in an ordinary hazard (Group 1) occupancy?

250 gpm (946 L/min)

500 gpm (1,893 L/min)

700 gpm (2,649 L/min)

850 gpm (3,218 L/min)

19. What is the color of the glass bulb in a 155°F (66°C) temperature-rated sprinkler head?

Orange or red

Yellow or green

Blue

Purple

20. What is the maximum slope for a ramp in an existing business occupancy?

1 in 8

1 in 10

1 in 12

1 in 14

Page 3 of 4

21. At what minimum pressure would automatic sprinkler piping be hydrostatically tested if the maximum system pressure is 175 psi (12 bar)?

175 psi (12 bar)

200 psi (13.8 bar)

225 psi (15.5 bar)

250 psi (17 bar)

22. To transfer Class I flammable liquids by pressurizing the tank, which of the following conditions must be met?

I. Inert gas is used to pressurize the tank.

II. Air is used to pressurize the tank.

III. A pressure relief device shall be provided.

IV. An interlock shall be installed on the container.

I and III

I and IV

II and III

II and IV

23. Which system piping contains air or nitrogen under pressure at all times?

Standard dry-pipe system

Wet-piping system

Preaction system

Deluge system

24. What is the maximum length of dead-end corridors in new mercantile occupancies protected by a supervised automatic sprinkler system?

20 ft (6 m)

50 ft (15 m)

75 ft (23 m)

100 ft (30 m)

25. A fire inspector is inspecting a fast-food restaurant that has an indoor playground structure exceeding 10 ft (3.1 m) in height and 160 ft³ (14.9 m²) in area.

Which of the following statements is true regarding combustible materials used in the playground structure's construction?

Combustible materials are not permitted

Class II interior floor finish is permitted

Wood components may be treated or non-treated

Foam plastics with a heat-release rate less than 100 kW are permitted

26. What is the classification for a building that does not qualify as a one- or two-family dwelling and provides sleeping accommodations for a total of 16 or fewer people on a transient or permanent basis, without personal care services, with or without meals, and without separate cooking facilities for individual occupants?

Dormitory

Hotel

Boarding facility

Lodging or rooming house

27. After conducting the annual test of a dry barrel hydrant, what is the maximum length of time permitted for full drainage to take place?

10 minutes

15 minutes

30 minutes

60 minutes

28. A document issued by the authority having jurisdiction for the purpose of authorizing performance of a specific activity would best be described as which of the following?

Permission

Approval

Acceptance

Permit

29. When may acoustical and decorative materials such as cotton, hay, paper, straw, moss, split bamboo, and wood chips be used as decorations within an assembly occupancy?

Materials not permitted

When small quantities are used

When they meet independent third-party certification

When flame-retardant treated to the satisfaction of the AHJ

30. Which of the following conditions gives an inspector the right to enter a private dwelling to conduct a fire inspection?

I. The consent of the occupant

II. Possession of a warrant authorizing entry

III. A written complaint from a citizen regarding the property in question

IV. When emergency exists

I and II

I, II, and IV

II, III, and IV

I, II, III, and IV

Page 4 of 4

31. What is the minimum static pressure drop required when flow testing fire hydrants?

5 percent

10 percent

15 percent

20 percent

CFI-I Certified Fire Inspector I Exam Free Dumps

CFI-I Certified Fire Inspector I Exam Free Dumps

Share this post

Related Posts

CFPS Certified Fire Protection Specialist Exam Free Dumps

CWBSP Certified Water-Based Systems Professionals Exam Dumps