CFPS Certified Fire Protection Specialist Exam Free Dumps

dumps2024-10-04T10:49:34+08:00

The CFPS Certified Fire Protection Specialist exam contains 100 multiple-choice questions; you have 3 hours to finish the test. The CFPS exam is available worldwide at Prometric’s in-person computer-based testing facilities or via online remote proctoring from any location on your computer. CFPS Certification helps fire safety, protection, prevention, and suppression technology, and other professionals grow their careers. We provide the latest Certified Fire Protection Specialist CFPS exam dumps, which are valuable for passing. Free Certified Fire Protection Specialist CFPS exam dumps are available below.

Page 1 of 3

1. Which of the following would NOT be an appropriate purpose for employing a guard service to protect a property against fire loss?

To protect the property at times when the management is not present

To carry out procedures for the orderly conduct of some operations on the property

To perform routine housekeeping and equipment maintenance operations during nonproduction hours

To facilitate and control the movement of persons into, out of, and within the property

2. Which type of construction consists of structural members of approved noncombustible or limited combustible materials with specified fire resistance ratings for exterior bearing walls of 3 or 4 hours?

A. Type I

B. Type II

C. Type III

D. Type IV

3. Which foam extinguishing agent can be proportioned into final concentrations of 1%, 3%, and 6%?

Film-Forming Fluoroprotein Agents (FFFP)

Low-Temperature Foaming Agents

Protein Foaming Agents (P)

Aqueous Film-Forming Agents (AFFF)

4. The two major principles used to determine egress width are the

density and group method.

flow and the capacity method.

inverse and the evacuation method.

stair width and floor method.

5. The goals of the first edition of NFPA 13D were to provide sufficient time for safe egress or rescue, economic viability, and

alert the fire department.

limit water damage.

limit damage to the dwelling.

prevent flashover.

6. The ignition temperature of acetylene gas is

581° F (305° C).

425° F (218° C).

350° F (177° C).

325° F (163° C).

7. Zebra mussel pipe obstructions are largely concentrated around the Great Lakes and

Colorado River areas.

Mississippi River areas.

Lake Mead areas.

Salt Lake areas.

8. Which factor plays a significant role in most industrial fire and explosion losses?

Process

Mechanical

Human

External

9. When evaluating the hydraulic properties of water for fire protection system, what is the measurement of a fluid's resistance to flow?

Velocity

Viscosity

Pressure

Density

10. What type of smoke management method is referred to as smoke purging, smoke removal, smoke exhaust, or smoke extraction?

Dilution

Compartmentation

Airflow

Pressurization

Page 2 of 3

11. Typical fire pump drivers reach maximum brake horsepower between

65-85% of rated capacity.

90-100% of rated capacity.

110-125% of rated capacity.

140-170% of rated capacity.

12. Potassium bicarbonate is a dry chemical agent considered to be twice as effective as

Asodium bicarbonate.

monoammonium phosphate.

sodium chloride.

potassium sulfide.

13. The primary design approach to mitigate the effect of wind on smoke movement in high-rise buildings is based on

outside temperature.

height of the building.

tightness of the building.

fire department access.

14. Response Time Index (RTI) is a value applicable to

Amount of time required for water to reach the most remote sprinkler.

Measure of thermal sensitivity of the air evacuation device of a dry pipe sprinkler system.

Measure of thermal sensitivity of a sprinkler's activation.

Measure of thermal sensitivity of a wet pipe sprinkler system's alarm device.

15. All of the following must be demonstrated to prove professional negligence under standard of care EXCEPT

breach of contract.

owing of a duty.

causation.

damages or harm.

16. The ignition test method that exposes the specimen to a known heat flux from a tungsten-quartz heater is referred to as a

fire propagation apparatus.

lateral ignition apparatus.

cone calorimeter.

intermediate-scale calorimeter.

17. What type of fire pump has a pressure range that can exceed 300 psi (2,068 kPa)?

Horizontal-end suction

Suction in-line

Split case

Vertical turbine

18. Which OSHA regulation addresses storage and handling of liquefied petroleum gas?

1910.107

1910.108

1910.110

1910.119

19. When using the Fire Safety Concept Tree to assess life safety for occupancies, the major categories of strategies include managing the fire, managing exposed occupants, and

emergency response.

occupant notification.

fire prevention.

risk classification.

20. Environmental Protection Agency standards require solid waste be treated as hazardous if it is a listed waste and/or meets the characteristics prescribed by the standard for toxicity, reactivity, corrosivity, and

solubility.

compactability.

lignitability.

treatability.

Page 3 of 3

21. The primary mechanism by which carbon dioxide extinguishes fire is

cooling.

saponification.

smothering.

chemical inhibition.

22. Which type of plan review may provide information about a modification such as the removal of an abandoned underground flammable liquid tank?

Site plan review

Preliminary building plan review

Final building plan review

As built plan review

23. Sound meters used to test notification appliances in fire alarm systems shall comply with which standard?

NFPA 70

NFPA 72

ANSI S12.13

ANSI S1.42

24. When using water mist as an extinguishing mechanism, the effectiveness of a fine mist depends on

the ability of the mist to directly spray on the fire.

how much mist diverts to the compartment boundaries.

how much conductive heat the mist system will absorb.

the momentum and direction of the spray relative to the fire.

25. Fire alarm systems audible appliances ratings are usually stated as a sound pressure level (SPL) at what distance?

1 ft (0.31 m)

10 ft (3.05 m)

15 ft (4.57 m)

20 ft (6.10 m)

26. Which type of roof covering is most effective in preventing the spread of fires from flying brands?

Class A

Class B

Class C

Class D

27. The minimum carbon dioxide design concentration for extinguishment of an ethylene fire is

34%

40%

43%.

49%.

28. What data analysis approach provides the broadest perspective of a fire problem?

Scenario groupings

Top-down approach

Data re-examination

Trend analysis

29. Heat transfer oils can be used up to

600° F (315° C).

650° F (343° C).

700° F (371° C).

750° F (399C).

30. Which pure metal in its solid form in oxygen has the highest ignition temperature in degrees Fahrenheit?

Aluminum

Potassium

Titanium

Zirconium

CFPS Certified Fire Protection Specialist Exam Free Dumps

CFPS Certified Fire Protection Specialist Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts

CWBSP Certified Water-Based Systems Professionals Exam Dumps