Dell NetWorker Deploy 2023 D-NWR-DY-23 Exam Dumps Available

dumps2024-03-20T09:58:31+08:00

D-NWR-DY-23 exam is the related one for Dell NetWorker Deploy 2023 certification. The Dell Data Protection D-NWR-DY-23 exam contains 2 parts: Part 1 contains 54 questions with a duration of 90 minutes, and the pass score is 63%; Part 2 contains 6 simulations with a duration of 30 minutes, and the pass score is 66%. Each candidate needs to pass both parts to pass the D-NWR-DY-23 exam. We provide the latest Dell NetWorker Deploy 2023 D-NWR-DY-23 exam dumps, which are valuable in your preparation. Free Dell NetWorker Deploy 2023 D-NWR-DY-23 exam dumps are available below.

Page 1 of 22

1. Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

Throttling

Quality of Service

Virtual Provisioning

Compression

2. Which are NetWorker modules?

NMSQL and NMSAP

NMM and NDMP

NMDA and NMMEDI

NMC and NSM

3. A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN scripts and a proxy host.

What prevents this implementation from being successful?

PowerSnap is not supported on Oracle 11g with EMC NetWorker 7.6.

BCVs cannot be mounted to a proxy host with a RAC cluster.

RTO of four hours cannot be accomplished.

ASM does not support proxy hosts.

4. What is a benefit of using vendor-specific API during a Dell EMC NetWorker Module backup?

Online backups can be used

Save set recovery is supported

Offline backups can be used

Persistent snapshots are supported

5. An administrator has been asked to assess the options available from the NetWorker backup application.

The objectives are:

- Greater efficiency with virtualized and pooled resources

- IT resources can be provisioned on-demand and easily returned to the resource pool

- Quickly allocate computing resources to meet business demands

- Enhanced security and protection of information assets

What should be recommended to the client?

NetWorker Virtual Edition and CloudBoost virtual;

On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention

On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives

Complete Data Protection Suite as Infrastructure-as-a-Service

6. A backup administrator is deploying an extended client on a Linux host.

The following error is observed during the installation:

Cannot contact a portmapper on port 7937.

What is the recommended action to resolve this issue?

Install the lgtoclnt-[version].rpm package and reinstall the Extended client.

Install the lgtoserv-[version] rpm package and reinstall the Extended client.

Install the lgtonode-[version].rpm package and reinstall the Extended client.

Install the Lgtobbb-[version].rpm package and reinstall the Extendd client

7. An EMC NetWorker customer wants to clone save sets from an EMC Disk Library (EDL) to a physical tape library. The customer requires full catalog tracking with minimum SAN utilization.

Which solution best satisfies these requirements?

Configure the backup server to perform the clone operation.

Configure the embedded storage node to handle the clone data flow.

Set up a second data zone with local devices dedicated to cloning.

Use the autoarchive feature on the ED

8. Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

nsrfsra

nsrexecd

nsrjobd

nsrd

9. An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.

How should this be enforced?

Client-side directive

AES directive

NetWorker user local directive

Server-side directive

10. Which database applications does EMC NetWorker Module for Databases and Applications provide backup support?

IBM DB2, Informix, Oracle, and MySQL

IBM Domino, Sybase, Microsoft Exchange, and Oracle

Oracle, Microsoft SQL and Exchange, and Informix

IBM DB2, MySQL, Sybase, and Microsoft Exchange

Page 2 of 22

11. Which EMC NetWorker command can be used to determine the number of records in the client file index for each client?

nsradmin

mminfo

nsrls

nsrinfo

12. On a Linux server, what is used to manage the Dell EMC Common Licensing Platform server?

lmgrd

LMTools

nsrcap

NMC

13. If a NetWorker backup is using a dedicated storage node, what is responsible for storing the tracking information?

NetWorker Server

NetWorker Storage Node

AuthC

NMC

14. A backup administrator is testing a block-based backup of a Linux server that is supported by Dell NetWorker, and the backup fails.

What is the cause of the failure?

LVM configuration is used.

AFTD target device is used.

BBB package is not installed.

Block-based backup is not supported on Linux.

15. Which technology is used to perform incremental Exchange Server backups using NMM?

Volume Shadow Copy Services

Block Based Backup

Resilient Change Tracking

Virtual Device Interface

16. A company recently deployed workloads in Amazon Web Services (AWS) and preferred to use Dell EMC NetWorker for unified backup and recovery. The system administrator needs to deploy a virtual CloudBoost appliance in VMware.

What needs to be done prior to the deployment?

Download the .OVA file and make it accessible from the computer

Ensure that the proper EC2 Instance Type is selected and configured

Ensure that CloudBoost AMI is available in AWS Marketplace

Enter the AWS access key ID and AWS secret access key

17. Which EMC NetWorker software component is responsible for storing metadata in the form of hash IDs for a deduplication backup?

Storage node

NetWorker client

Deduplication node

NetWorker server

18. What is recommended when configuring EMC NetWorker module clients?

Assign all module clients to the same group and pool

Assign all module clients to the same group and schedule

Use the same group for application and file system backups of module clients

Use the same pool for application and file system backups of module clients

19. Which databases can be backed up using a NetWorker with NMM?

MongoDB and MySQL

Microsoft SQL and Exchange

PostgreSQL and MongoDB

Oracle and Microsoft SQL

20. A backup administrator is configuring a NetWorker snapshot backup. They find that the return code of the probe phase is "0".

What is the meaning of this code?

A client backup is not required

A user-defined script is not found

A client backup is required

The probe phase has failed

Page 3 of 22

21. In a Dell EMC NetWorker environment, the daily scheduled backup was started. However, the backup failed without mounting the device.

What is a possible reason for the failure?

Volumes labeled in the required pool are appendable

Protection group is not selected on the pool

Devices do not have volumes that match the pool required by the backup request

Tape devices attached to the NetWorker server are showing recyclable

22. What is integrated with NMDA to provide snapshot-based protection for DB2?

PowerSnap

SnapImage

VSS

VMware

23. A backup administrator needs to provide Block Based Backup (BBB) support for a RHEL NetWorker client.

Which is an appropriate NetWorker BBB software package?

lgtobbb-nw*.deb

lgto-block-based*.rpm

lgto-block-based*.deb

lgtobbb-nw*.rpm

24. You have been tasked to protect a newly configured Microsoft SQL server residing within a two node cluster. The following requirements must be met: Backups must be performed daily. All data must be transmitted over the LAN. Hot backup must be performed automatically regardless of which node the virtual server resides on at the time of backup.

What software is required to achieve this?

NetWorker Module for Microsoft Applications and SnapImage

NetWorker PowerSnap Module only

NetWorker Module for SQL only

NetWorker Module for SQL and PowerSnap

25. An administrator needs to create a point-in-time copy application host data and retain the backup on the storage array.

What type of backup should be used?

Block-based Backup

Snapshot backup

NDMP backup

Probe-based backup

26. What is a consideration for a block based backup (BBB) installation and configuration?

Client Direct should be disabled in the client configuration

Checkpoint restart and standard EMC NetWorker directives are not supported

Only Data Domain backup target devices are supported

Linux BBB package (lgtobbb) is required for full and incremental support

27. Which applications does Dell EMC NetWorker Snapshot Management support?

DB2, SQL, and SAP with SQL

Exchange, SQL, and SharePoint

Exchange, SQL, and Hyper-V

DB2, Oracle, and SAP with Oracle

28. In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.

What should be considered to avoid backing up the same data twice?

Exclude database or application data from file system backups

Schedule backups during low performance demands on the application server

Ensure file system and database backups for the same client run at the same time

Configure one workflow for both database and application data

29. What is a consideration when deploying a Dell EMC NetWorker client in a clustered environment?

NetWorker software must be installed on shared storage accessible to all hosts

Only the virtual service needs to be defined as a client resource

"All" save set will back up everything including shared data volumes from all nodes

30. What is the recommended media type for the device that stores the metadata in the form of hash IDs for EMC NetWorker deduplication backups?

adv_file

file

Tape

Atmos COS

Page 4 of 22

31. A storage administrator backs up an Exchange server to an EMC Data Domain system. The Data Domain system is configured as an advanced file device. The administrator now wants to create a copy of the backup and send it to tape.

The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.

Which option should be used?

Use the Scheduled Cloning attribute to schedule a clone job to start at 9 pm.

Run the nsrclone command at 8 pm and the second copy will be directed to tape at 9 pm.

Enable the "clones" attribute in the client's group setting.

From the Administration window, under Media select Save Sets and then the Query Save Set tab. Create clone copies of the backup at 8 pm.

32. Which target devices support Block Based Backup when Client Direct is enabled?

CloudBoost, ProtectPoint devices and CloudBoost devices

CloudBoost, DD Boost, and ProtectPoint devices

DD Boost, CloudBoost, and Dell EMC Cloud Tier devices

AFTDs, DD Boost, and CloudBoost devices

33. Which type of device is referred to as a BOOST device?

Data Domain

File Type

Advance File Type

Cloud

34. A storage administrator has configured a client for snapshot backups using EMC NetWorker Snapshot Management. The backup completed successfully and the administrator is now ready to restore the data.

Which type of restore will destroy all existing data onthe target application volume?

Rollback

Snapshot

Restore from rollover

Directed

35. A Dell EMC NetWorker solution will be implemented that consists of two NetWorker servers and a single NetWorker Management Console (NMC). The NMC will be installed on only one of the NetWorker servers.

To allow management of both servers from the NMC, which command must be executed and on which NetWorker server?

nsraddadmin; server where NMC is not installed

nsraddadmin; server where NMC is installed

nsrauthtrust; server where NMC is installed

nsrauthtrust; server where NMC is not installed

36. An EMC NetWorker customer wants to perform a complete backup of a SQL server with three databases.

Which save set name should be used?

MSSQL:

MSSQL:DB

MSSQL:*

MSSQL: ALLDB

37. Which type of NetWorker recovery automatically performs a point-in-time recovery?

Block-based

Browsable

Directed

Save set

38. What is used to configure and start the CLP license server service on a Linux host?

nsrlic

lmgrd

LMTools

NMC

39. A backup administrator has configured three clients for backup on a newly installed EMC NetWorker server. The administrator has configured a workflow to back up the clients at 6 P.M. each day.

The schedule specifies a synthetic full backup on Sunday and incremental backups the rest of the week. After two days, they notice that the client file indexes for these clients are not being backed up.

What is the reason for this issue?

A device needs to be configured and mounted for the 'Server db backup' action

NetWorker server has not been fully licensed yet

The CFI and bootstrap are only backed up for full backups

The override on the 'Server backup' workflow is set to level 'Incremental'

40. Which target device types are supported by Dell EMC NetWorker block based backups?

FTD and CIFS

AFTD and Avamar

AFTD and Data Domain

Data Domain and Tape

Page 5 of 22

41. An EMC NetWorker administrator wants to back up only the CFI and the bootstrap save sets.

Which command will achieve this requirement?

savegrp -l full -O group name

save -l full -O group name

savegrp -i full -O group name

save -i full -O group name

42. What is a characteristic of NMM Microsoft SQL VSS?

Backup and recovery granularity is only available at the database level

Directed recoveries can be performed only to different hosts

Only databases in SQL simple recovery mode are supported

Full and incremental backups are supported

43. What is the correct sequence of steps to configure Dell EMC NetWorker as a cluster-aware application for Linux clients?

44. A storage administrator wants to configure a virtual tape library device within EMC NetWorker. In addition, the administrator wants the backup data deduplicated.

Which other EMC product is required?

Data Domain

VPLEX

RecoverPoint

Avamar

45. What is a characteristic of EMC Net Worker's Open Tape Format (OTF)?

Allows multiplexed, heterogeneous data to reside on the same media

Controls the number of save streams a client backs up simultaneously

Collects information for pools and index entries to allow data segregation

Identifies the ports used by Net Worker to allow data to be saved through a firewall

46. A backup administrator notices that an EMC NetWorker UNIX client takes a long time to complete the daily backup. After investigation, the administrator discovers the client has some large, disk-based file systems with a high daily change rate.

The client is currently configured as a dedicated storage node. The backup environment consists of a NetWorker server, NetWorker storage node, NetWorker deduplication node, and several DD Boost devices.

What can be done to speed up the backup for this NetWorker client without changing the file system?

Enable Checkpoint Restart at the directory level

Back up the client to the deduplication node

Configure the client for parallel save streams

Disable the Changed Block Tracking feature

47. An administrator added several new LDAP user accounts for backup configuration and monitoring tasks. The LDAP users have been authenticated in NetWorker Management Console (NMC).

What must be done so that these tasks can be performed on the Dell EMC NetWorker server?

Add the user accounts to the ‘Users’ user group on the NMC server

Add the user accounts to the ‘External roles’ field of the user groups on the NetWorker server

Add the user accounts to the ‘Users’ field of the Security Administrators group on the NetWorker server

Add the user accounts to the ‘Registrations’ resource on the NMC server

48. A backup administrator is protecting a VMware environment with Dell EMC NetWorker and Data Domain systems.

Which component serves as the Data Mover of the virtual machine backup data between the VMware datastore and Data Domain system?

NetWorker storage node

Data Domain System Manager

VMware vSphere

Networker vProxy appliance

49. A customer’s EMC NetWorker environment has a Solaris client that had been backing up without failing for several weeks.

The client has the following local mount points:

/

/usr

/home

/var

And two nfs mount points:

/mars/data1

/jupiter/data1

The save set was identified as "ALL" in the client resource. The client had crashed and was successfully rebooted the previous day. The first request for a restore for this client was submitted for the last night's backup of /mars/data1/Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is successful but the mars data is not found and fails to be restored.

What is the most likely cause of this restore failure?

/mars/data1 was not in the /etc/vfstab file and had not been backed up.

The /nsr/res/servers file on mars is empty, prohibiting the restore.

The nsrexecd was not running on mars, preventing the backup.

The client save set was identified as AL

ALL does not back up nfs mounts points.

50. An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four.

How is data written to the advanced file type device?

Each save set is written to a separate file.

Each file written by the storage node contains up to four save sets.

Four backup jobs will be multiplexed for every two files written to the device.

Two save sets will be stored in each file.

Page 6 of 22

51. A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.

What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

52. In EMC NetWorker, what is a benefit of using multiplexing with backups to tape?

Reduced network traffic

Improved restore times

Reduced CPU utilization on backup client

Improved backup device throughput

53. What is a characteristic of NMDA for MySQL backups?

Scheduled and manual backups can be run using the NetWorker User for MySQL interface

NMDA cannot delete the binary logs from the disk after completing a binary log backup

NMDA interacts with the MySQL Enterprise Backup software through the MySQL SBT interface

MySQL data and binary logs can be sent to separate backup pools during a single NMDA backup

54. A backup administrator is asked to install NWUI on a Linux-based non-NetWorker Server.

Which software package should be used?

lgtoclnt-nw-19.2-0.x86_64.rpm

lgtoxtdclnt-19.2-0.x86_64.rpm

lgtonwui-19.2.x86_64.rpm

lgtonwuiserv-19.2.x86_64.rpm

55. When a user logs into the Dell EMC NetWorker Management Console (NMC) server, what provides token-based verification of NMC and CLI users?

AuthC

External authentication

nsrla

nsradmin

56. Which EMC NetWorker feature provides the ability to back up an individual tablespace of a database?

Granular backup

Parallelism

Online backup

Client Direct

57. What is a feature of Replication to the Cloud?

no on-premises infrastructure required

fast restore from local cache copies using site cache

fast restore from short-term on-premises copies

greater efficiency with pooled resources

58. Refer to the exhibit.

How many nsrlcpd processes are running on the EMC NetWorker server?

59. Your customer is running an EMC NetWorker 7.6 server and wants to upgrade their clients running NetWorker 7.4.

What are two ways to do this remotely from the NetWorker server?

Software Administration Wizard and nsrpush

Copy with Clients and nsrpush

Software Administration Wizard and nsrclient

Copy and nsrpush

60. A Dell EMC NetWorker administrator has a requirement for a CloudBoost solution that provides the following:

- No on-premises infrastructure is required

- Low-cost cloud object storage for all backup copies

- Deduplication, encryption, and compression at the source

Which CloudBoost use case meets these requirements?

Replication to the cloud

Backup to the Cloud Tier

Backup to the cloud

Backup within the cloud

Page 7 of 22

61. In an EMC Net Worker environment, regardless of what ports the service port range is set to, which two ports will nsrexecd always try to listen on?

7937, 7938

9301, 9302

4711, 4712

8080, 8081

62. When recovering data from the Cloud Tier with Dell EMC networker, how long is the data retained on the Data Domain device?

3 days

7 days

10 days

14 days

63. An administrator installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period will end soon.

What should the administrator tell the customer?

NetWorker will operate for 90 more days with a trial license

NetWorker will operate for 60 more days with a trial license

A permanent license must be applied immediately

NetWorker will operate indefinitely with a trial license but without support

64. What is a characteristic of a Dell EMC NetWorker online database backup?

Uses a vendor specific API to extract data

Shuts down the database before backing up the data

Used only in an active/passive environment

Copies the data to a temporary location before backup

65. Which method(s) can you use to display a list of unlabeled tape volumes in EMC NetWorker?

EMC NetWorker Administration Devices window only

mminfo and EMC NetWorker Administration Devices view

EMC NetWorker Administration Media view only

mminfo and EMC NetWorker Administration Media window only

66. What happens when an EMC NetWorker AFTD becomes full while backups are running?

Backups are paused; aborted and expired save sets are deleted.

Backups are paused; the oldest save sets are staged.

Backups fail; simultaneous restore jobs continue.

Backups span to another volume.

67. What is the purpose of EMC NetWorker’s retention policy?

Determines the minimum length of time save set entries are maintained in the media database

Determines the minimum length of time file entries are maintained in the CFI

Indicates whether or not a save set is browsable

Indicates when a media pool will be deleted

68. Which protocol is used when performing an EMC NetWorker backup to a cloud device?

TCP

UDP

OST

iSCSI

69. A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.

Where will the tracking information for all save sets backed up in the group be stored?

Media database

Client File Index

RAP database

Jobs database

70. Be able to recover Microsoft application data from a persistent snapshot.

What is a recommended EMC Networker add-on module?

EMC Networker Module for Microsoft Applications.

EMC Networker Module for Databases and Applications.

EMC Networker PowerSnap Module.

EMC Networker Snaplmage Module.

Page 8 of 22

71. A Dell EMC NetWorker administrator is unable to assign a protection group to a workflow. During the configuration, the drop-down does not list that group as a selection.

What is a possible reason for the missing group?

Group is already assigned

Group is disabled

Group does not contain any clients

Group has over 250 client resources

72. You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.

What needs to be done to recover SQL data?

Launch the EMC NetWorker User for SQ

Modify the browse time within the EMC NetWorker User GU

Use Microsoft SQL server native tools to recover the data from EMC NetWorker.

Modify the save set to include the SQL instance or database name.

73. In a Microsoft Windows environment, what is a characteristic of a bare metal recovery when using Dell EMC NetWorker?

Can be used to restore individual files

Can be used for recovery of networker server database

Required when a host encounters a catastrophic failure

Restores only the operating system

74. An EMC NetWorker backup administrator wants to use a single interface to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker. They are also looking for capacity planning information for the various components in the environment.

Which EMC tool is recommended?

Data Protection Advisor

Data Domain Management Console

NetWorker Management Console

Avamar Administrator Console

75. A NetWorker workflow is configured as a probe-based backup What actions must be included in the workflow?

internal and metadata validation

clone and probe and action only

check connectivity and probe actions

probe and backup actions

76. A customer is running an EMC NetWorker 7.6 server on a UNIX platform and wants to monitor backup operations from the command line.

Which utility can be used?

nsrinfo

nsrmmd

nsrjb

nsrwatch

77. A backup administrator has been asked to license a backup environment which consists of three NetWorker Datazones. Using a single License Server, how many license files are required?

78. Where is the Dell EMC Data Protection Extension plug-in installed?

ESXi Host

vRO Host

vProxy Appliance

vCenter Host

79. Which type of Microsoft SQL VSS backup is supported by NetWorker Module for Microsoft?

Microsoft SQL database differential backups

Microsoft SQL backup of individual filegroups

Microsoft SQL transaction log backups

Microsoft SQL individual database backup

80. The three primary types of EMC NetWorker hosts form an architecture/topology.

What is this called?

EMC NetWorker Data Zone

EMC NetWorker Storage Domain

EMC NetWorker Storage Zone

EMC NetWorker Cell

Page 9 of 22

81. An administrator has installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period ends soon.

What should the administrator tell the customer?

NetWorker will operate indefinitely with a trial license but without support.

A permanent license must be applied immediately.

NetWorker will operate for 60 more days with a trial license.

NetWorker will operate for 90 more days with a trial license.

82. When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?

For scheduled backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.

For scheduled backups, backup level is determined by the NSR_BACKUP_LEVEL parameter in NMDA configuration file.

For manual backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.

For manual backups, backup level is always Full by default and this can not be changed.

83. Which combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC NetWorker?

Multiple backups and multiple recoveries

Multiple backups and only one recovery

Only one backup and multiple recoveries

Only one backup and one recovery

84. Which command can be used to send message contents to a printer on a Windows NetWorker server?

mail

nsrlog

nsrlpr

smtpmail

85. An administrator experienced a power failure in their data center. After checking their Dell EMC Networker servers, the administrator discovered an error message on one of the Networker server.

The message indicates that the media database does not exist.

What is the recommended way to resolve any corruption in the database?

Rename the old/nsr/mm directory and recover from the bootstrap save set

Delete the old/nsr/mm directory and create a new bootstrap save set

Allow Networker to recreate the new /nsr/res directory and create a new bootstrap save set

Delete the old/nsr/res directory and create a new bootstrap save set

86. An EMC NetWorker administrator wants to allow multiple tenants to share a single NetWorker data zone without purchasing any additional licenses.

What solution will address the administrator’s needs?

Restricted Data Zones

NetWorker Snapshot Management

Client Direct backups

Cloud Optimize

87. Which daemon controls the library resources?

nsrlcpd

nsrctld

nsrmmd

nsrmmdbd

88. What is the function of Persistent Binding in an EMC NetWorker SAN environment?

Prevent device target-id changes

Prevent WWPN changes

Prevent silent SCSI bus resets

Prevent a tape label/barcode mismatch

89. An EMC NetWorker administrator on an UNIX terminal wants to monitor volume mount requests.

Which NetWorker Administrative interface is recommended?

nsrwatch

nsradmin

NetWorker Management Console

Backup and Recovery Manager

90. How should this be enforced?

Client-side directive

AES directive

NetWorker user local directive

Server-side directive

Page 10 of 22

91. Which process needs to be running on each EMC NetWorker client?

nsrd

nsrexecd

nsrjobd

nsrmmd

92. An administrator is performing a directed recover to a Microsoft Windows cluster environment.

What is the role of the client that initiated the recovery?

Destination client

Administering client

NMC client

Source client

93. Which Dell EMC Networker daemon manages device operations on a storage node on behalf of the nsrd process?

nsrmmgd

nsrsnmd

nsrmmdbd

nsrmmd

94. You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment.

Which module is required?

PowerSnap

SnapImage

SnapView

NMM

95. Which process is responsible for authenticating and processing the NetWorker Server remote execution requests?

nsrd

nsrdispd

nsrexecd

nsrmmd

96. A Dell EMC Networker Administrator always wants to perform a backup of the cluster virtual client data to its local storage node device.

How can this be achieved?

List all storage nodes as part of the cluster under the "Storage Node" attribute of the virtual client resource.

Ensure the "Storage Node" attribute under the virtual client resource is blank.

Use the keyword "curphyhost" under the "Storage Node" attribute of the virtual client resource.

Specify the local storage node for all physical client resources in the cluster.

97. Which Dell EMC NetWorker folder structure contains tracking information for each file backed up by a client called “Oracle_Host”?

/nsr/index/db6

/nsr/index/Oracle_Host/db6

/nsr/index/Oracle_Host

/nsr/index/db6/Oracle_Host

98. A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.

What type of device should the backup administrator configure?

AFTD

LTO

FTD

NFS

99. A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed. Unable to connect the NMC server.

The administrator determined the NMC was not installed.

What is the recommended action to resolve the issue?

Rerun the installation and enable the NMC option.

Run the lgtonmc-[version].exe installation executables.

Open a service request with Dell Technologies.

Run the lgtoxtdcint-fversion

exe installation executable.

100. What is a consideration when performing a rollback restore with Dell EMC NetWorker Snapshot Management?

Restoring from tape storage media can potentially take a long time

Restore operation destroys all previously existing data on the target disk

Restore operation requires that individual files to restore be selected

Snapshot must be mounted on a storage node/mount host

Page 11 of 22

101. Which NetWorker component communicates with AD/LDAP?

NetWorker Authentication Service

Networker Management Console

NetWorker REST API

NetWorker Authentication Database

102. An administrator is backing up a Windows 2008 R2 system using save set ALL with EMC NetWorker version 7.6.2. The administrator notices that no VSS save sets are backed up.

What can be done to back up the VSS save sets?

Specify VSS:DISASTER_RECOVERY=off

Reinstall the client software

Check the VSS service on the client

Recreate the client resource

103. A Dell EMC NetWorker environment has a cluster consisting of two physical nodes and one virtual service.

What is the minimum number of NetWorker client resources that must be created to ensure all of the data will be backed up?

104. A Dell EMC NetWorker administrator has configured the backup of the "All" save set on a Linux host that contains a remote mount point. However, during the restore, the administrator did not see the mount point data but only local data.

What is a possible reason for this behavior?

Linux mount point backup is not supported.

The-x option was not used with the save command.

Mount point backups require the extended client package.

savepnpc command was not used.

105. A Dell EMC NetWorker administrator is configuring the backup environment to use the parallel save streams feature. However, the administrator notices that the feature is not being used for backups of a specific client.

What is a possible cause for this issue?

Client parallelism = 4 PSS:streams_per_ss = 4

Client parallelism = 8 PSS:streams_per_ss = 4

Client parallelism = 8 PSS:streams_per_ss = 12

Client parallelism = 12 PSS:streams_per_ss = 4

106. What is the default timeout value of token expiration defined in the AuthC local database?

60 minutes

72 minutes

480 minutes

520 minutes

107. In EMC Networker what will automatically mount and label a scratch volume when needed?

Auto Media Management

Dynamic Drive Sharing

nsrjb

nsrmmdb

108. A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.

Which parameter determines when the volume in the clone pool is a candidate for recycling?

Longest retention time of any save set on the clone volume

Longest retention time of any differential save set on the clone volume

Longest retention time of any full save set on the clone volume

Longest retention time of any incremental save set on the clone volume

109. A Dell EMC NetWorker server has been configured to stage from an AFTD upon reaching a high water mark of 80%.

After the staging begins, which rule determines when the staging process ends?

All save sets over a specified size are moved.

All save sets older that the "max storage period" are moved.

Capacity used falls to any point below the high water mark.

File system utilization reaches the low water mark.

110. A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?

PSS is enabled for target Data Domain devices.

The Igtobbb package is not installed.

AFTD device is enabled for Client Direct.

LVM or VxVM are enabled on the OS level.

Page 12 of 22

111. What is a characteristic of backups with the EMC NetWorker Module for SAP?

All backups use block based backup technology

NMM can also be used to back up SAP Oracle data

Full, cumulative-incremental, and incremental backups are supported

NMSAP replaces the SAP interfaces on the backup client

112. You have been tasked to move the EMC Net Worker Management Console (NMC) from the EMC Net Worker server to an alternate server.

To utilize the new server as an NMC, what is the complete list of software that needs to be installed?

Client software Console server software Java Runtime Environment

Console server software Java Runtime Environment

Client software Console server software Change Journal Manager software

Storage node software Java Runtime Environment

113. A Dell EMC NetWorker administrator configured their backups for save set "C:Users" to run daily at 12:00 PM with levels based on the exhibit.

At 1:00 AM on Day 3, file "C:UsersJohnmyscript.txt" was deleted. At 5:00 PM on Day 4, folder "C:UsersJohn" was renamed to "C:UserJohn_old".

On Day 7, the administrator decided to recover the entire save set back to Day 6. Based on this environment, which result can be expected?

myscript.txt file will not be recovered under "C:UsersJohn"

myscript.txt file will be recovered under "C:UserJohn_old"

myscript.txt file will not be recovered under "C:UserJohn_old"

myscript.txt file will be recovered under "C:UsersJohn"

114. An administrator wants to select clients on a NetWorker server to start at the same automated time.

To what resource should the clients be assigned?

protection group

policy

schedule

workflow

115. During the configuration of a tape library attached to a remote EMC NetWorker storage node, an"Access denied" error message is reported.

What is the root cause of the issue?

User on the storage node must have privileges to create the jukebox resources on the NetWorker server.

User configuring the tape library must match the name of the administrative user on the storage node.

The NetWorker storage node has to be defined as a client on the NetWorker server.

User on the NetWorker server must have "logon as a service" privileges on the storage node.

116. A Dell EMC Networker backup administrator wants to identify bottlenecks for a file server with poor backup performance. The administrator discovers that Client Direct is disabled for the file server.

What happens when Client Direct is enabled?

Backup data is sent directly to the target device and metadata is sent to the storage node.

Backup data is sent directly to the target device and metadata is sent to the NetWorker server.

Backup data is sent to the storage node and metadata is sent to the NetWorker server.

Back up data and metadata are sent to the storage node and then to the target device.

117. A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated backups using NMM with block based backups (BBB). However, the backup failed when attempting to write to AFTDs.

What is the possible reason for the backup failure?

Federated backups are not supported with BBB

nsrnmmsv backup command was used

Client Direct is not enabled

AFTD is not supported with BBB

118. After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?

Device

Schedule

Group

Policy

119. Your Windows environment consists of several EMC NetWorker servers on the same subnet that are responsible for backing up only specific clients for security reasons. You need to change one backup client’s “parent” NetWorker server from NWServer-A to NWServer-B.

Which file do you need to change in order to ensure only NWServer-B can back up this client?

srresservers

srres
srdb
srd

srmm
srim.priv

Networkr.cfg

120. Which privilege must be assigned to a user group to allow its members lo create NetWorker clients?

Monitor NetWorker

Operate NetWorker

Configure NetWorker

Remote Access All Clients

Page 13 of 22

121. What is the outcome of using the recover -iN command?

The recovered file is renamed when a conflict occurs.

A recover is simulated, and no data is recovered.

The file is not recovered if a conflict occurs.

The file overwrites the existing file if it is newer than the existing file.

122. Which administrative interface provides a global view of multiple NetWorker servers that are involved in a backup environment?

NWUI

DDMC

nsrwatch

NMC

123. A Dell EMC NetWorker administrator wants to start all NetWorker processes on a Linux server.

Which command should be run?

/etc/init.d/networker start

/etc/rc2.d/gst start

/sbin/int.d/networker start

/sbin/init.d/gst start

124. For EMC NetWorker to communicate to DMZ Clients, what port or ports are required for rpcbind (portmapper) to be running and available through the firewall?

7938

7937 and 7938

7937-9936

0-0

125. Which technology is used for backup and recovery with NMM?

NDMP

Parallel Save Streams

Virtual Device Interface

Changed Block Tracking

126. A system administrator has recently performed a recovery of Microsoft Exchange server using NMM.

Where can the administrator check the operation status?

NetWorker User for Microsoft application only

NetWorker Management Console only

NetWorker Management Console and NetWorker User for Microsoft application

Application API reporting tools

127. Which EMC NetWorker process keeps the record of the TCP/IP port range that is used by EMC NetWorker processes?

nsrexecd

nsrports

nsrd

nsrpm

128. Click the Calculator icon in the upper left-hand corner. In an EMC NetWorker environment, the customer is backing up 500 GB per day. The 500 GB is comprised of 35,000 very large files.

According to EMC best practices, approximately how large will the Client File Index (CFI) be?

6 MB

4 MB

8 MB

10 MB

129. You are troubleshooting a problem with EMC NetWorker resources and some of the attributes are not being displayed in NetWorker Administration GUI.

What is done to display the advanced attributes?

Enable Diagnostic Mode

Rescan all devices

Restart gstd and NMC

130. A Dell EMC administrator needs to backup Informix dbspaces every four days and depend on a maximum of two backups for the restores.

What is the Informix backup level sequence required to meet this requirement?

0, 1, 1, 0

0, 1, 2, 0

0, Logs only, Logs only, 0

Full, Incr, Incr, Full

Page 14 of 22

131. Which Microsoft VSS component ensures that the application data is consistent when a shadow copy is created?

Writer

Requestor

Provider

Interceptor

132. What is required to recover the bootstrap save set in Dell EMC NetWorker?

Device with the volume containing the bootstrapEmpty/nsr/res directory

NetWorker processes are running Device with the volume containing the bootstrap

NetWorker processes are not running Empty/nsr/res and /nsr/mm directories

NetWorker processes are not running SSID and location of the latest bootstrap

133. Which role is performed by an EMC NetWorker storage node?

Reads the data device during recovery

Generates backups

Executes the save command

Performs recoveries

134. How can an EMC NetWorker administrator achieve a recovery of an EMC NetWorker resource database?

Perform a browsable recovery of the /nsr/index directory

Rebuild the database with nsrck command

Recover the SYSTEM save set

Recover the bootstrap save set with mmrecov

135. Which Dell EMC NetWorker database allows an administrator to browse backup details for a particular point in time?

Jobs database

Resource database

Media database

Client File Index

136. A company wants to install EMC NetWorker server software in their Microsoft Windows environment with uses both SAN-attached disk and DAS.

Where should install the required software?

Separate volume from the OS

C:Program FilesLegato

Proxy host on the SAN

C:Program Files (x86)

137. An EMC NetWorker server has been configured to back up to an AFTD. The volume reaches full capacity.

What is the result of this condition?

Volume is not marked as full; a message is displayed stating that the file system requires more space

Volume is marked as full and continues to back up to either a disk or tape volume

Volume is not marked as full, a save set being written to the AFTD continues to another volume

Volume is marked as full and NetWorker suspends all saves directed to the device

138. In the policy notification window, a NetWorker administrator wants to configure a notification 'On Completion'.

What are the available options to create this notification?

Log file and pop-up message

Log file and email

Email and pop-up message

Connect EMC and email

139. In EMC NetWorker, what best describes the source capacity licensing model?

Aggregate of a full backup from all sources

Aggregate of differential backups from all sources

Aggregate of incremental backups from all sources

Aggregate of Level 9 backups from all sources

140. Refer to the exhibit.

An administrator asks about the clone flag on the Cloud.

What does the T flag represent?

Save set exists only on a Cloud Tier device

Save set will be cloned to a tape device

Save set will be terminated at the cloud provider

Save set exists only on the cloud storage

Page 15 of 22

141. Which window in NMC would the EMC NetWorker backup administrator select to configure a new remote storage node?

Devices

Media

Configuration

Monitoring

142. Which EMC NetWorker process coordinates all scheduled backups?

nsrjobd

nsrd

nsrindexd

nsrmmdbd

143. Which private cloud providers are supported in NetWorker?

Amazon Web Services and Generic OpenStack Swift

Elastic Cloud Storage and Generic OpenStack Swift

Google Cloud Storage and Microsoft Azure

Scality Object Storage and Elastic Cloud Storage

144. Which NetWorker daemon or process generated on each Storage Node is responsible to manage all device operations?

nsrmmd

nsrsnmd

nsrlcpd

nsrd

145. Which virtual environments are supported by NetWorker to back up virtual machines?

KVM and Microsoft Hyper-V

Microsoft Hyper-V and Citrix XEN

VMware and Microsoft Hyper-V

Citrix XEN and VMware

146. Why is the Dell EMC NetWorker server client parallelism value higher than any other client by default?

Manage more devices simultaneously

Assign the NetWorker server a higher priority

Increase the bootstrap backup performance

Accommodate server CFI backups

147. When connecting to an EMC NetWorker console server running on Solaris, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the NetWorker console server.

However, the error message remains.

What needs to be done to resolve the problem?

Reinstall the NetWorker Management Console server.

Reinstall the existing JRE version.

Append /gconsole.jnlp to the URL of the console server.

Restart the console server.

148. ClientA is a client in an EMC NetWorker environment. There are two EMC NetWorker servers, ServerA and ServerB. There is also one storage node, Storage NodeA. You noticed that there are no entries in the /nsr/res/servers file on ClientA.

Which system(s) is(are) allowed to back up data from ClientA?

Any EMC NetWorker server

ServerA only

Any EMC NetWorker server, using StorageNodeA

No systems are allowed to back up ClientA

149. Which tool is available to help determine and track source capacity usage in an EMC NetWorker environment?

EMC AMP Utility

EMC NetWorker License Manager

nsradmin

nsrlic

150. A Dell EMC NetWorker backup administrator wants to generate a list of monthly backups from the command line.

Which command can be used to perform the operation?

mminfo

nsradmin

gstclreport

jobquery

Page 16 of 22

151. An EMC NetWorker server is connected to a Data Domain system with a CIFS share configured.

Which device type should be configured on NetWorker?

AFTD

Cloud

Data Domain

Remote

152. One or more of which process is started, per configured device, to support the reading and writing of data?

nsrmmdb

nsrd

nsrsnmd

nsrmmd

153. What is a requirement when configuring Dell EMC NetWorker staging with a Data Domain Cloud Tier device?

Staging to a Data Domain Cloud Tier device is supported based on the water marks

Staging to a destination pool with a Data Domain Cloud Tier backup pool is supported

Staging from a Cloud Tier device to two available Data Domain systems is supported

Staging from a Data Domain Cloud Tier device when using only one Cloud Unit is supported

154. In an EMC NetWorker environment, a clone volume (physical tape) required for a recovery is not currently mounted.

Which attribute is consulted first to determine the storage node used for the recovery?

Client's "Recover Storage Node"

Client's "Clone Storage Node"

Client's "Storage Node"

Jukebox "Read Host Name"

155. An EMC administrator backs up Microsoft Exchange server with EMC NetWorker Module for Microsoft Applications.

What best describes backups in this case?

Only scheduled backups are supported.

Backup can be performed from either Exchange server or EMC NetWorker backup server.

Instant backup of Exchange server is not supported.

Instant recovery of Exchange server is not supported.

156. When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?

Provide users on the EMC NetWorker management console server the administrative privileges

Provide users on the EMC NetWorker server the administrative privileges

Provide users on the EMC NetWorker management console server the console user privileges

Provide users on the EMC NetWorker server the console user privileges

157. What are categories of Console database data retention?

Completion Data and Backup Failure Data

Audit Data and Completion Data only

Audit Data, Completion Data, and Completion Message

Backup Failure Data and Completion Message

158. To be able to use the EMC NetWorker Management Console remotely, which network ports need to be open?

10001 through 30000

111 and 514

7937 and 7938

9000 and 9001

159. What is the first step that occurs during a client initiated backup?

Save program generates one save stream of data

Save program connects to nsrmmd

Save program initiates a connection to nsrindexd

nsr daemon sends information to EMC NetWorker server

160. Which directory holds the tracking information of each file backed up by the client "tuba" on EMC NetWorker server "soprano"?

/nsr/index/tuba/db6

/nsr/tuba/db6

/nsr/index/soprano/db6

/nsr/soprano/db6

Page 17 of 22

161. In EMC NetWorker, what happens to the volume when Auto Media Management is enabled in "Device" properties for standalonedevices?

Manually loaded into the device for backup

Automatically labeled to store backup data

Status is set to "suspect"

Status is set to "recyclable"

162. A backup administrator wants to verify that data was successfully written to an AFTD.

Which window in NMC would the administrator select to go gather this information?

Media

Devices

Configuration

Monitoring

163. What is a supported action sequence for traditional workflows in Dell EMC NetWorker?

Probe, Backup Traditional, and Clone

Check Connectivity, Clone, and Clone

Backup Traditional, Probe, and Clone

Check Connectivity, Probe, and Clone

164. A backup administrator needs to find out if a file was backed up.

Which command should be used to perform this task?

nsrmm

nsrim

mminfo

nsrinfo

165. In an EMC NetWorker backup environment, what happens when you try to clone a volume to which backups are currently being written?

Clone operation waits for the source volume to finish writing.

Clone operation exits with the following error: source volume in use.

Backup is suspended to the source volume for the duration of cloning.

NetWorker skips the clone operation for save sets on the volume in use and continues to clone other save sets.

166. What is a characteristic of Dell EMC NetWorker IBM Domino backups and recoveries?

Domino data base backups occur after the DAOS files

Backups can be configured for only DAOS base directory and sub-directories

Restores are supported at the database and document levels

Domino transaction logs must be backed up with other Domino files

167. In EMC NetWorker, which utility is used to view the “daemon.raw” file using the locale of the current host?

nsr_render_log

nsr_la

nsr_layout

nsr_task

168. An administrator wants to perform a directed recovery using EMC NetWorker.

What is a requirement?

Destination client must be in the source client's Remote Access list.

Destination client must be in the source client's servers file.

Administering client must be in the destination client's Remote Access list.

Source client must be in the destination client's Remote Access list.

169. NMDA for Oracle supports which levels of incremental backups?

1 and 9 only

0, 1, and 9

1 only

0 and 1 only

170. In a Dell EMC NetWorker environment, what uses an embedded SQLite database?

NetWorker Media and NMC databases

NetWorker Media, Jobs, and Resource databases

NetWorker Jobs and Client File Index databases

NetWorker Media and Jobs databases only

Page 18 of 22

171. You create an EMC NetWorker advanced file type device. You then notice that the corresponding read-only device is missing.

What is a possible cause?

Device is not labeled.

Device path is invalid.

Disk Backup Option Enabler is missing.

No backups have been performed.

172. An administrator needs to use a Data Domain with DDBoost Option in an EMC Networker environment.

Which license(s) must be added on the EMC NetWorker Server?

Data Domain Device Type Enabler and Data Domain Capacity Enabler

Data Domain Disk Backup Option and Storage Node

Data Domain BOOST and Data Domain VTL

Virtual Tape Library

173. A Dell EMC NetWorker backup administrator is trying to restore Client A form Client B in the same datazone. After clicking the "Recover" option using NetWorker User for Windows, the administrator is not able to see Client A in the source window.

What is the reason for this issue?

This type of recovery is not supported

Remote access field of Client B is not populated

Administrator user must perform the recovery

Remote access field of Client A is not populated

174. Your Oracle DBA runs an RMAN script via cron to back up their data to an EMC NetWorker server. You run a report using the NetWorker Management Console (NMC) to view all backup activity. The Oracle backups are missing from the report.

How do you explain this?

An NMC status report needs to be run on the Oracle client to see this information.

A save set detail report needs to be run via NMC to see RMAN backups.

You need to run an event summary in NMC to see data backed up using a Net Worker module.

Data that is backed up manually is not tracked by NMC reporting.

175. Which EMC NetWorker command is replaced when using an EMC NetWorker module?

save

savefs

savepnpc

savegrp

176. A backup administrator notices that an EMC NetWorker Windows client takes a long time to complete the daily backup. After investigation, the administrator discovers the client has some large, disk-based file systems.

The client is currently configured as a dedicated storage node. The backup environment consists of a NetWorker server, NetWorker storage node, a NetWorker deduplication node, and several DD Boost devices.

What can be done to speed up the backup for this NetWorker client without changing the file system?

Configure the client for block based backup

Back up the client to an AFTD on the storage node

Disable the Changed Block Tracking feature

Enable Checkpoint Restart at the directory level

177. In an EMC NetWorker storage node with four stand-alone LTO tape drives, which daemons must be running?

One nsrmmd and four nsrlcpd

Four nsrmmd only

Four nsrmmd and one nsrlcpd

Four nsrlcpd only

178. An incremental backup is performed and combined with the most recent full backup and subsequent incremental backups to make a new full backup. A non-PowerProtect DD series appliance is used.

Which backup level is described?

Synthetic Full

Incremental

Virtual Synthetic Full

Cumulative Incremental

179. EMC NetWorker is using a library controlled by an ACSLS server. Information about a tape volume was accidentally deleted from the media database.

What is run to recover the information?

scanner

mmrecov

jbconfig

nsrmm

180. In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon, nsrd?

Manage the NetWorker media database

Start other NetWorker server and storage node daemons

Coordinate all scheduled backups

Provide the read and write service for NetWorker CFI databases

Page 19 of 22

181. A Lotus Notes administrator wants to perform backups of their Partitioned Domino servers. They are planning to deploy NMDA.

What objects can be backed up at the incremental level?

Transaction logs only

Domino databases and transaction logs only

Transaction logs and DAOS directory only

Domino databases, transaction logs, and DAOS directory

182. What is a consideration for using the Dell EMC NetWorker block based backup feature?

No more than 25 consecutive incremental backups can be created.

Backup storage must be deduplication device.

Base client package provides recovery support for all clients.

Full and incremental backups must be on the same device.

183. A Dell EMC NetWorker backup administrator is considering using a dynamic group for backups of clients in the Finance department.

In addition to creating the protection group, what needs to occur in order to run a backup with a dynamic group?

Configure the backup in the department to select clients based on the tag

Add each client in the department to the group resource

Assign a tag to each client resource for that department.

Create a probe resource and assign to each client resource.

184. An EMC NetWorker environment, what is the minimum number of ports required per storage node in a non-AFTD device?

185. By default, which NetWorker server policy and workflow back up the CFI?

Silver policy and NMC Server backup workflow

Server Protection policy and Server backup workflow

Server Protection policy and NMC Server backup workflow

Gold policy and Server backup workflow

186. You have successfully configured three SQL servers for backup with the EMC NetWorker Module for SQL. These servers are configured as follows: Save set: MSSQL: All three clients are in the same group Data for this group is sent to the SQL_Bkup pool Scheduled backup of the group shows that all SQL data from the three servers was successfully backed up.

However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you only see file system data to recover.

What must you do to recover the SQL data backed up with the NetWorker module?

Launch the NetWorker User for SQ

Modify the browse time within the NetWorker user GUI to show the period for which you want to recover.

Use the Microsoft SQL Server native tools to recover the data from NetWorker.

Modify the save set to include an instance or database name after MSSQL:.

187. What is a key feature of the EMC NetWorker Module for Databases and Applications?

Delivers a unified solution for database applications in a EMC NetWorker environment.

Supports Exchange and VSS

Supports VMware features for PowerSnap snapshots.

Supports Oracle and Microsoft SQL

188. A Dell EMC NetWorker backup administrator runs a client-initiated save backup with option-1 incremental.

Which backup level is displayed during this backup?

Incremental

Ad-hoc

Manual

Full

189. A backup administrator is implementing an EMC NetWorker backup solution for an Oracle database running on Microsoft Windows.

Which backup command is used?

save

nsrdasv

nsrdbsave

nsrsnap_vss_save

190. You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a server-initiated backup via the command line. You are receiving an error when attempting the savegrp command.

What is the most likely reason for the error?

You do not have system administrator privileges.

You cannot manually start server-initiated backups.

You should use the save command instead of savegrp.

The savegrp command can be run only from a backup client.

Page 20 of 22

191. Refer to the exhibit.

A backup administrator configures an EMC NetWorker staging policy to move save sets from backup Device A to backup Device B. A restore session is started and requires save sets that were staged to Device B.

What is the data flow in this recovery?

Data is reconstructed from Device B to Device A through the storage node and then sent back to the client.

Data goes from Device B through the storage node to the NetWorker server and then to the client.

Data goes from Device B through the storage node and then to the client.

Data is restored to the storage node and copied to the client.

192. An EMC NetWorker customer has an autochanger with four LTO-3 tape drives. All four drives are configured to a NetWorker server. Two drives are dynamically shared with a NetWorker storage node. One of the shared drives suffers a mechanical failure and is disabled.

How many nsrmmd processes need to be running on the NetWorker server?

193. Which binary is present on a host when the EMC NetWorker client software is installed?

nsrexecd

nsrd

nsrindexd

nsrsnmd

194. An EMC NetWorker administrator wants to find all the files within a save set that are still browsable by the client.

Which command will allow the administrator to perform this task?

nsrinfo

nsrls

mminfo

inquire

195. What does an EMC NetWorker directive do?

Directs the save set to a specific pool

Omits specified files from a file system backup

Specifies a file system to back

Specifies the storage node to use for the backup

196. A client needs permission to the virtual node client file indexes.

Which client resource property must the administrator update to provide the permission?

remote access

save set

backup command

storage node

197. A Dell EMC Networker backup is configured as a probe-based backup.

What must be configured in the workflow for this backup?

Probe and backup actions

Backup and clone actions

Probe action only

Check Connectivity and probe actions

198. Why is a full backup needed to create a disaster recovery backup within EMC NetWorker?

DISASTER_RECOVERY: save set is backed up only during full backups

VSS SYSTEM save sets are backed up only during full backups

VSS backups of DISASTER_RECOVERY: are not enabled if an incremental backup is initiated

VSS SYSTEM FILESET: save set is backed up only during full backups

199. You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.

What must be done to back up the data on the Celerra?

Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or storage node.

Create a storage node on the Celerra and select NDMP in the "type of storage node" field.

Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this device.

Create an NDMP backup pool and add this pool to a save group with other clients.

200. You are deleting save sets manually from the EMC Net Worker server using CLI commands. You receive an error that the database update has failed.

What process should you verify is running on the Net Worker server?

nsrlcpd

nsrmmdbd

nsrmmd

mminfo

Page 21 of 22

201. An administrator is configuring a backup environment and requires the following:

- Eliminate storage node bottlenecks

- Reduce the number of network hops

Which Dell EMC NetWorker feature should be used?

Client Direct

Checkpoint Restart

Deduplicated Backup

Parallel Save Streams

202. What is a characteristic of the Dell EMC Networker Jobs database purge process?

Based on workload

Based on size

Based on time

Based on performance

203. Which private cloud providers does NetWorker support?

Amazon Web Services and Generic OpenStack Swift

Google Cloud Storage and Microsoft Azure

Elastic Cloud Storage and Generic OpenStack Swift

Scality Object Storage and Elastic Cloud Storage

204. Which Microsoft VSS component gathers information to properly save applications, services, or files in a filesystem?

Provider

Requestor

Writer

Interceptor

205. What is a characteristic of a Dell EMC NetWorker data protection policy?

Group of workflows

Data source to protect

Data protection operation

Actions that can be performed

206. What types of IDS logical log backups are supported with NMDA for Informix?

Level 1 & Level 2 backup only

Automatic (continuous) logical log and manual logical log

Level 0 & Level 1 backup only

Automatic (continuous) logical log only

207. How is the Dell EMC NetWorker multi-tenancy facility option enabled?

Configuring a tenant administrator in a restricted datazone

Adding a license to increase the number of managed zones

Configuring clients to a multi-tenant enabled Data Domain device

Configuring a restricted datazone resource on a NetWorker server

208. A Dell EMC NetWorker administrator needs to configure Data Domain with DD Boost as a backup target in a newly installed environment. The administrator is using the EMC Licensing Solution.

Which licenses, if any, must be added on the NetWorker server?

DD Boost and OPENSTORAGE

Data Domain Storage System and Data Domain Capacity Entitlement

Data Domain Disk Backup Option and Storage Node

No special licensing is required

209. An EMC NetWorker administrator wants to create a new custom notification. The notification needs to send an e-mail with a critical severity when a backup failure of a savegroup occurs.

Which attribute causes the notification to be sent when the backup fails?

Event

Alert

Priority

Action

210. What is a characteristic of a browsable recovery?

Used when recovery of a large number of files is required

Requires exact file name be typed when recovering a single file

Accesses information from the client's CFI

Requires extra steps for restoring to a specific point-in-time

Page 22 of 22

211. In an EMC NetWorker environment, you are required to keep media in drives for only 10 minutes after completion of backup.

What parameter must be set?

Operation timeout

Unload sleep

Idle device timeout

Withdraw timeout

212. What is the key performance tuning feature that determines the amount of multiplexing when writing to a tape device?

Block Based Backup

Block Based Backup with Parallel Save Stream

Parallelism

Parallel Save Stream

213. A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk Library.

To ensure that the embedded storage node is used to read the data during clone operations, what is required?

Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.

Set the clone storage node value for the embedded storage node client resource to itself.

Create a client for the embedded storage node.

Create a clone pool and assign the appropriate rights to it.

214. What is an advantage of using a Dell EMC Networker synthetic full backup?

Automates the recovery process

Creates a snapshot on only the disk array

Reduces recovery time and steps

Enables users to perform instant restores

215. Which command is used to recover EMC Networker server?

nsrdr

scanner

mmrecov

recover

216. What is an EMC NetWorker consolidated backup?

A level 1 backup which is then merged with the save set’s last full backup creating a new full backup.

A level 9 backup which is then merged with the save set’s last full backup creating a new full backup.

A level Full backup which is then merged with the save set’s last full backup creating a new full backup.

An Incremental level backup which is then merged with the save set’s last full backup creating a new full backup.

217. A Dell EMC NetWorker backup administrator wants to recover a large number of files from a backup.

Which type of recovery is recommended for the restore?

Snapshot

Directed

Save Set

Browsable

218. What is the benefit of using the EMC NetWorker Client Direct feature?

Reduced bandwidth usage

Reduced CPU utilization on the client

Reduced number of full backups

Reduced client disk access

219. An Microsoft Exchange server administrator wants to receive a daily e-mail about the backup status of the Exchange server.

Where in the EMC NetWorker Configuration tab can this notification be set?

Client Properties

Notifications

Security Audit Log

Registrations

220. Which URL should be used to launch the NetWorker Management Console in a web browser?

https://:9090/nwui

https://:9090

https://:9000

https://:9002/nwui

Dell NetWorker Deploy 2023 D-NWR-DY-23 Exam Dumps Available

Dell NetWorker Deploy 2023 D-NWR-DY-23 Exam Dumps Available

Share this post

Leave a Reply Cancel reply

Related Posts