Dell PowerEdge Foundations 2023 Exam D-PE-FN-23 Free Dumps

dumps2024-01-25T14:05:36+08:00

Dell PowerEdge Foundations 2023 Exam D-PE-FN-23 real test contains 42 questions, and you have 90 minutes to complete the test. The Pass Score for the D-PE-FN-23 exam is 63%. The available language is English. We have cracked the latest Dell PowerEdge Foundations 2023 Exam D-PE-FN-23 dumps, which are valuable in your preparation. Free Dell Server D-PE-FN-23 exam dumps are available below.

Page 1 of 8

1. Where can a system administrator check and change power supply redundancy options on a Dell EMC PowerEdge server?

UEFI BIOS

iDRAC GUI

PXE web interface

Dell Power Manager interface

2. A system administrator needs to install an operating system (OS) on a server that is in BIOS mode.

What is the correct sequence of steps to set the server into BIOS mode?

3. Why is Error Correcting Code (ECC) memory beneficial in Dell EMC PowerEdge servers?

Provides a separate memory management scheme for memory operation

Creates redundancy by mirroring physically installed memory

Can present more memory than what is physically installed

Can repair errors without interrupting other server operations

4. What is a Virtual Machine Manager (VMM)?

Command shell for interacting with a host

Web management tool for a virtual machine host

Hypervisor

Plug-in run by a hypervisor

5. Order the DHCP address handshake steps.

6. What is s backup process?

Capturing historical records used for further reference and is not actively used by the server

Using server technologies to transmit data from one computer node to another

Moving data that is no longer activity used to a separate storage device, for long-term retention

Copying files to a secondary site for preservation in case of equipment failure of other catastrophe

7. Which protocol translates domain names into IP addresses?

DHCP

ARP

DNS

Ethernet

8. A server administrator has been receiving reports of high CPU utilization on a Windows Server.

Which tool can they use to check for any applications that are using excessive amounts of CPU time?

Lifecycle Controller

OMSA

SAE

Task Manager

9. An administrator wishes to create a complex RAID set for a high-performance database, where the value of the data far exceeds the cost of the drives.

Which complex RAID level should be used?

RAID 1

RAID 10

RAID 50

RAID 60

10. Where is a tower server commonly deployed, and why?

Branch or remote location, because a rack is not needed

Datacenter, because tower servers tend to be more powerful so more work can be done in the same physical space

Branch or remote location, because of security concerns

Datacenter, due to more PCI support allowing for more external storage

Page 2 of 8

11. What is the correct sequence to deploy the operating systems when using the Lifecycle Controller?

Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.

a) Select the operating system. b) Enter the Lifecycle Controller. c) Insert the operating system installation media. d) Select OS Deployment and deploy. e) Configure the RAID disk.

a) Enter the Lifecycle Controller. b) Select the operating system. c) Insert the operating system installation media. d) Select OS Deployment and deploy. e) Configure the RAID disk.

a) Insert the operating system installation media. b) Enter the Lifecycle Controller. c) Select the operating system. d) Select OS Deployment and deploy. e) Configure the RAID disk.

a) Select the operating system. b) Configure the RAID disk. c) Insert the operating system installation media. d) Select OS Deployment and deploy. e) Enter the Lifecycle Controller.

a) Enter the Lifecycle Controller. b) Insert the operating system installation media. c) Select OS Deployment and deploy. d) Select the operating system. e) Configure the RAID disk.

12. Which document provides the computer hardware that has been tested to pass Microsoft standards of compatibility, reliability, security, and applications for all Dell EMC PowerEdge Servers?

HML

BCL

Quickspecs

HCL

13. An administrative user sends a Word document as an attachment to their coworker using the email client.

Which protocol is used to complete this transaction?

SMTP

SFTP

SNMP

SCTP

14. A customer looks for a storage solution to boot the hypervisor, where one is active and the other standby.

Which solution will allow the requirement?

BIOS

IDSDM

BOSS

UEFI

15. Where can a history of change related to hardware components for a managed system be found?

Windows Event Logs

Raid Controller Logs

Lifecycle Logs

System Event Logs

16. A system administrator wants to remove and replace their operating system installation with a newer version. The administrator is using a Dell EMC Rack server with an iDRAC set up correctly.

Which tools are required to perform this operation?

iDRAC, SupportAssist, and Virtual Console

iDRAC, Virtual Console, and Virtual Media

iSM, Repository Manager, and Virtual Console

iDRAC, OMSA, and iSM

17. What is a consideration for a hardware administrator who is physically installing multiple servers into a rack?

Observe load requirements specified in documentation for the switch.

Avoid unevenly loading the rack and creating a hazard.

Ensure that the server can connect to Windows updates

Ensure that the associated UPS can also power the top-of-rack switch.

18. For which use case is Dell EMC OpenManage Essentials recommended for installation?

Comprehensive, one-to-one systems management solution for remote or local servers

Management console for one-to-many monitoring of Dell EMC infrastructure

Operation of hardware while iDRAC is non-functional

Management and integration of operating system updates across an entire environment

19. What is an example of a dedicated server?

Virtual Switch server

Clustered server

Database server

Secure Shell server

20. Which advance feature does a Dell EMC energy-smart power supply offer?

Ability to update firmware without the downtime

Provides thermal management of the supply

Reverse airflow to meet data center requirement

Throttles output to power-heavy components

Page 3 of 8

21. Based on the graphic, which device has a Serial ATA (SATA) interface?

22. A customer requires an external storage for their Dell EMC PowerEdge Server.

What type of storage will be the most cost-effective solution for the requirement?

DAS

NAS

CAS

SAN

23. An administrator experiences a failure in one of the two redundant power supplies in a Dell EMC PowerEdge server. The administrator has a shelf spare, but it has a different wattage rating from those in the server.

What will happen if the administrator installs the spare power supply in the existing configuration?

Power Supply Mismatch alert is issued; the original power supply is used and the newly installed power supply is not used

Power Supply Mismatch alert is issued; both power supplies are disabled, resulting in the system being powered down

Differences in supply wattages is recognized; power is conditioned so that the supply drawing the lower wattage is used

Power Supply Mismatch alert is issued; the original power supply is disabled and the newly installed supply is used

24. Which error control technique is used by ECC memory?

Repetition codes

Hamming code

Checksums

Cryptographic hash functions

25. An administrator sets up an In-Band management method to monitor their Dell EMC PowerEdge servers.

Which protocol uses In-Band management for basic communication and messaging?

SNMP

HTTP

SMTP

FTP

26. Which initial menu option should be chosen from the iDRAC Virtual Console to access System Setup?

Lifecycle Controller

Next Boot

Normal Boot

Virtual CD/DVD

27. What is the correct sequence of steps to gather a SupportAssist Collection via the iDRAC9 UI?

Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.

a) Log in to the iDRA

b) Select Start a Collection. c) Navigate to SupportAssist. d) Select Maintenance. e) Click Collect. f) Select destination where Collection will be saved.

a) Select Start a Collection. b) Click Collect. c) Navigate to SupportAssist. d) Select Maintenance. e) Log in to the iDRA

f) Select destination where Collection will be saved.

a) Select destination where Collection will be saved. b) Navigate to SupportAssist. c) Log in to the iDRA

d) Select Maintenance. e) Click Collect. f) Select Start a Collection.

a) Select Maintenance. b) Select destination where Collection will be saved. c) Navigate to SupportAssist. d) Log in to the iDRA

e) Click Collect. f) Select Start a Collection.

a) Navigate to SupportAssist. b) Select Start a Collection. c) Log in to the iDRA

d) Select Maintenance. e) Click Collect. f) Select destination where Collection will be saved.

a) Select Start a Collection. b) Log in to the iDRA

c) Select Maintenance. d) Navigate to SupportAssist. e) Click Collect. f) Select destination where Collection will be saved.

28. Which partition scheme is utilized by a BIOS implementation?

GPT

GRUB

MBR

EBR

29. Where in the iDRAC GUI can the iDRAC be reset to its default settings?

Maintenance > Troubleshooting

Troubleshooting > SupportAssist

Troubleshooting > Diagnostics

Maintenance > Diagnostics

30. An administrator must launch the Boot Manager page to access the Lifecycle Controller.

What key should be used during POST?

F10

F11

F12

Page 4 of 8

31. Simultaneously pressing the "Ctrl" + "Shift" + "Esc" keys launches which Microsoft Windows built-in tool?

Task Manager

Network Monitor

Performance Monitor

Resource Monitor

32. A system administrator has Dell EMC PowerEdge server with dual 750W PSUs in a "Not Redundant" configuration with hot spare enabled. One PSU was accidentally removed from the server.

What is the expected behavior in this scenario?

Available power is reduced to a single PSU rated output, and the server may shutdown

If the active PSU was removed, the server will reboot to activate hot spare

Available power remains unchanged as the output of two PSUs is never combined in servers

The server will immediately shutdown as PSUs were configured in "Not Redundant" mode

33. A system administrator notices that a client system cannot access the Internet. The IP address is 169.254.10.26. The client system is correctly wired.

Which server role should the administrator investigate?

PROXY

TCP/IP

SNMP

DHCP

34. What is the name of the log generated by SupportAssist?

Support Assist Report

Support Assist Log

Technical Support Report

Technical Support Log

35. An MX7000 was purchased with minimal configuration.

What can an administrator add to make the MX7000 management interface fully redundant?

CMC module

MX9116n module

MX9002m module

Enterprise license

36. A company's servers are housed in a multi-unit rack.

What could be a potential concern for on-going operation?

Higher density in the rack leads to reduced network bandwidth

Lack of power available for adding more servers to the rack

Temperature inside the rack is higher than room temperature

Maximum number of iDRACs that can be connected through a stack port is 3

37. An administrator needs to know which IP address corresponds to a MAC address.

Which protocol will support this?

DHCP

ARP

DNS

STP

38. A customer needs to review Microsoft Windows events using a built-in monitoring tool.

Which tool should be used?

Performance Monitor

Resource Monitor

Task Manager

Server Manager- Local Server

39. What server types offer more disk drives and expansion slots and are the most cost effective within the Dell portfolio?

Tower Servers

Nano Servers

Blade Servers

Rack Servers

40. What is the amount of hard drives request per RAID set, when configure RAID 50?

Page 5 of 8

41. A server is experiencing issues with completing POST. The environment does not have a KVM or "Crash cart" available to view where the system is halting.

Which method can an administrator use to determine the first place to start troubleshooting?

Run OpenManage Essentials

Check rear lights on the server chassis

Run Repository manager

Check iDRAC Post Code

42. What types of data transfer are used by Dell EMC servers to connect mass storage devices?

USB, Ethernet, SSD, and CSI

SAS, USB, Ethernet, and SSID

SSID, CSI, USB, and SAS

Ethernet, SSID, CSI, and SAS

43. Which type of drive is an array of semiconductor memory organized as a disk drive that uses an integrated circuit?

SSD

SATA

PATA

SAS

44. Which common airflow issue can be found in data centers?

Mixing or Leakage

Reverse circulation

Crosswind

Backdraft

45. What is an example of a data archive?

Data of internal business policies and procedures

Data that is corrupted, changed or logged incorrectly

Current and critical production data that resides in a server’s primary storage

File and mail account data for a user that left an organization one month ago

46. Which RAID level requires a minimum of four hard drives?

RAID 0

RAID 1

RAID 5

RAID 6

47. What is the main purpose of Virtual Memory?

Increase physical memory.

Increase system performance.

Add a layer of redundancy.

Add a copy of files.

48. Which SAS revision sustains a transfer rate of 12 Gb/s for SAS devices?

SAS 1.0

SAS 2.0

SAS 3.0

SAS 4.0

49. Which type of servers are all-in-one chassis platforms that provide computer servers, network I/O modules, and storage devices?

Tower Servers

Modular Servers

Accelerated Servers

Software-Defined Servers

50. An administrator installs a group of patches on their Microsoft Windows servers and all the servers start randomly rebooting. The administrator identifies the specific patch causing the reboots.

How can the administrator efficiently remove the specific patch from all affected servers at once?

Log into each server individually and remove the patch manually

Log into the WSUS server and issue a rollback of the patch causing the issue

Log into the WSUS server and issue a rollback of every patch available

Log into only the important servers and remove the patch manually

Page 6 of 8

51. Which service is provided by a Dell EMC Smart Uninterruptible Power Supply (UPS)?

Increased wattage to the power supplies of the server

Limited standby power in the event of a power outage

Uninterrupted power during a prolonged power outage

Remote maintenance of any attached server

52. What is RAM used for in a Dell PowerEdge server?

Archive storage

RAID storage

NVMe cache

Volatile memory

53. A customer needs to access webmail on a laptop. Using a browser, they type in the URL and the page display correctly.

What is the correct of stops used to load the webpage?

54. A server administrator wants to get the latest HBA driver for the Dell EMC PowerEdge server from support.dell.com.

Which protocol is used to complete this activity?

TFTP

SFTP

HTTPS

55. A system administrator needs to set up a server and assign an IP address on a Class C network. All addresses are available on the network.

Which IP address should the system administrator use for the server?

210.100.155.12

195.0.0.0

192.168.12.0

200.200.200.255

56. What is a benefit of NVDIMM?

Accelerates workloads into the next generation server

Operates at higher voltages

Provides Auto-Rebuild

Provides data redundancy

57. Which technology should a customer choose to directly connect an external storage array?

FICON

FCoE

ESCON

SAS

58. Where in the iDRAC GUI can the recording of the last three boot cycles of a Dell EMC PowerEdge server be found?

Maintenance > Troubleshooting

Maintenance > Diagnostics

Troubleshooting > SupportAssist

Troubleshooting > Lifecycle Log

59. A company is planning a storage capacity for their new solution and have an archiving system that requires long retention periods for the data.

What is the storage tier that best suits the new solution?

Lower storage tier

Extreme performance storage tier

Flash storage tier

Performance storage tier

60. Based on the exhibit, which device is a Boot Optimized Storage Solution (BOSS) Controller?

Page 7 of 8

61. Which log can be viewed in the iDRAC?

Security Log

Error Log

Lifecycle Log

Application Log

62. What is maximum number of iDRAC Virtual Console sessions that can be run simultaneously?

63. A server administrator needs to monitor a Dell EMC PowerEdge server without installing any additional software.

Which management tool is the most appropriate to use?

OME

SAE

iDRAC

OMSA

64. Which RAID level introduces a new state called "partially degraded" when a single drive failure occurs?

RAID 0

RAID 1

RAID 5

RAID 6

65. What occurs during the Data Wiping process?

Destroys CDs and DVDs by pulverizing and cross-cut shredding

Disposes sensitive data using file detection, disk formatting, and file encryption

Temporarily removes data from a readwrite medium so that it can no longer be read

Logically connects storage media to a bulk-wiping device

66. A data center technician recently added several fully populated racks containing Dell EMC servers to an existing data center. A few days later, clients started expressing concern about their systems randomly shutting down due to temperature related errors.

Which design option should be explored in order to help resolve this issue?

Exhaust gas recirculation

Increasing system temperature

Reducing airflow

Hot aisle containment

67. An administrator receives a report that a system crashed. However, users were unable to capture the error message before the system rebooted.

How can the administrator see what the message was?

Check timestamps and look for clues in UPS logs

Review BIOS settings to check WatchDog

Read backup logs from the last backup that was performed

Using the iDRAC, navigate to the “Last Crash” screen

68. Why is a mandatory practice to review the service manual prior to replacing or reseating components on a Dell EMC PowerEdge server?

Service manual provides vital information on which live wires in the system to avoid, to ensure electric shock does not occur

Service manual describes how to reconfigure the server for optional performance-boosting settings, increasing efficiency

Service manual covers crucial cable routing and special part handling instructions

Service manual gives detailed instructions at which firmware levels the components should run

69. Which techniques are used in STP network cables to enhance the signal quality?

Shielding, wire tubing, and enforcement

Shielding, wire twisting, and cancellation

Foiling, wire twisting, and enforcement

Foiling, wire tubing, and cancellation

70. A system administrator needs to connect through a private network with more than 400 systems on the same broadcast domain.

Which network class should be used to achieve this task?

Class B

Class C

Class D

Class E

Page 8 of 8

71. Based on Dell EMC best practices, what is a Network map?

Report of all drivers, applications, and firmware associated with each server

Guide to where hardware is located, and which connections are part of it

List of all hardware in the network, including software and licenses

Library of all logs being gathered from each individual server

72. A backup administrator is migrating their tape drive backup solution from LTO-4 to LTO-6 generation. Both LTO-3 and LTO-4 media are presently in use. All LTO-4 drives are to be replaced by LTO-6 drives, but the administrator plans to avoid replacing a maximum amount of the tapes already in use.

What should the administrator do to accomplish this task?

Back up all critical data on at least LTO-4 tapes in order to be read it from their new LTO-6 drives.

Back up all critical data from LTO-3 tapes to LTO-4 tapes Next, back up LTO-4 tapes to LTO-5 tapes Next, back up LTO-5 tapes to LTO-6 tapes

Nothing, the administrator will still be able to read any tape currently in use will their LTO-6 drive and will be able to retrieve data if needed

Back up all critical data from LTO-3 tapes to LTO-4 tapes Next, back up LTO-4 tapes to LTO-5 tapes

Dell PowerEdge Foundations 2023 Exam D-PE-FN-23 Free Dumps

Dell PowerEdge Foundations 2023 Exam D-PE-FN-23 Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts