DES-6322 Specialist-Implementation Engineer-VxRail Exam Updated Questions

dumps2021-10-22T02:05:12+08:00

Specialist-Implementation Engineer-VxRail DES-6322 exam questions are updated, which are good material for you to pass the test easily. DELL EMC DES-6322 exam contains two parts: 54 questions in Part 1, and 6 simulations in Part 2. Each candidate has 120 minutes to complete the two parts. The required passing score of Part 1 is 63%, and the passing score of Part 2 is 67%. You need to pass both of two parts to pass the test. Free DELL EMC DES-6322 exam updated questions are available below.

Page 1 of 4

1. What is a supported witness configuration for a 3+3+1 VxRail Stretched Cluster?

vSAN Witness appliance with customer provided license

Physical ESXi host with included cluster license

Physical ESXi host with multiple VxRail clusters as witness

vSAN Witness appliance or a physical ESXi host

2. Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

PCIe network card must be added to all nodes

Node requires only the same drive configuration

Node hardware must be identical to the other three nodes

New node must be at the same VxRail version as existing nodes

3. A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches

How should the switch ports used for VxRail be configured to achieve a successful deployment?

Set the port type to edge

Enable link aggregation for all ports

Set the port mode to access

Enable MLD snooping and querier

4. What is the correct CL! command to collect only the VxRail Manager logs?

generateFullBundle.py -c

vm-supportsh -c

generateLogBundle py -v

vc-support sh -v

5. According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

VxRail vCenter Server Planning Guide Network Validation Tool

VxRail vCenter Server Planning Guide VxRail Network Planning Guide

VxRail QuickStart Guide VxRail Network Planning Guide

VxRail QuickStart Guide Network Validation Tool

6. CORRECT TEXT

After implementation, the implementation engineer observes errors from both VxRail Manager and vCenter Server. Dell EMC support has requested a log bundle containing only the required log files. Using the simulator, create and download a log bundle for Dell EMC support.

When you have finished, continue to the next question.

7. What is the correct CLI command to collect only the vCenter logs on VxRail Manager

vc-support.sh Cv

generateFullBundle.py Cv

vc-support-bundle.sh Cc

generateLogBundle.py Cc

8. A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.

What is an expected benefit of programmatically gathering VxRail information?

Perform node shutdowns and specific operations

Perform pre-checks for vSAN health

Automate iDRAC firmware management and status

Obtain status of all running operations on a cluster

9. An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis .

How many VMs are licensed to be protected on the cluster?

10. DRAG DROP

A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code .

What is the correct order of steps to complete this task?

Page 2 of 4

11. During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed

What is a possible cause?

SRS VE Gateway on the same subnet as the VxRail Manager

VxRail status already set to installed' in IB database

Site ID mismatch between the IB database and the SRS Wizard

Witness Gateway not configured following Dell best practices

12. What is a consideration when implementing a custom VDS on a VxRail cluster?

Used by multiple clusters managed by a single vCenter instance

Supported with external and internal vCenter Servers

Supports only four NIC uplinks

Supports only two NIC uplinks

13. A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.

What action does the engineer need to perform on each host once the upgrade has been completed?

From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host

From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them

Set the InstantClone Maintenance annotation value to the original value

Set the InstantClone Maintenance annotation value to 2

14. How should an administrator manually validate the DNS readiness of a customer network?

Run a traceroute to the DNS server

Generate a Network PEQ

Ping the default gateway of the management VLAN

Run nslookup on server FQDN and IP

15. What code is returned when a VxRail API request is executed successfully?

200

207

400

500

16. DRAG DROP

Match each VxRail data protection solution with its functionality.

17. DRAG DROP

Match each VxRail API request with the information to be retrieved.

18. What is a valid 2-node VxRail cluster configuration?

Series with 4x 25 GbE in a direct-connect configuration

Series with 4x 10 GbE in a switch configuration

Series with 4x 1 GbE in a direct-connect configuration

Series with 2x 25 GbE in a switch configuration

19. A VxRail Manager VM must be configured as follows:

* IP address: 192 168.10.16

* Net mask: 255.255.255.0

* Gateway: 192 168 10 254

Which command must be used?

vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254

vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254

vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 - vxrail-gateway 192.168,10 254

vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 -- vxrail-gateway 192.168.10.254

20. A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process.

Where in the vSphere Client can they review alarms and overall vSAN health?

Triggered Alarms > Issues and Alarms > All issues Triggered Alarams > vSAN > Skyline Health

Monitor > All Issues > Issues and Alarms Monitor > vSAN > Health

Triggered Alarms > All Issues > Issues and Alarms Triggered Alarms > vSAN > Health

Monitor > Issues and Alarms > All issues Monitor > vSAN > Skyline Health

Page 3 of 4

21. An implementation engineer needs to validate the VxRail network configuration.

Where can they obtain the NVT for VxRail?

Dell Technologies Central

Dell Technologies Information Hub

Dell VxRail Expert Channel

Dell VxRail Fast Pass

22. Which command is used to restart the Loudmouth process on an ESXi node?

/usr/IibAmiware/loudmouth/bin/loudmouthd restart

systemcti restart loudmouth

/etc/int.d/loudmouth restart

systemcti restart vmware-loudmouth

23. Which vSAN rules are configured for the VXRAIL-SYSTEM-STORAGE-PROFILE?

Failures to tolerate - 2 failures RAID-1 (Mirroring) Object space reservation - Thin provisioning

Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thin provisioning

Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thick provisioning

Failures to tolerate - 1 failure RAID-5 (Erasure Coding) Object space reservation - Thick provisioning

24. What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?

Latency and bandwidth measurement to the witness host

Network configuration and performance for vSAN

Network performance for virtual machines

Latency measurement between DCs for Stretched Clusters

25. What is a valid 2-node VxRail cluster configuration?

2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter

2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter

2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter

2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter

26. Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

Loudmouth

Election

Marvin

Mystic

27. A VxRail cluster is being deployed in a DMZ environment .

What is the recommended deployment option?

External vCenter Server with customer-supplied VDS

External vCenter Server with VxRail-deployed VDS

Internal vCenter Server with internal DNS

Internal vCenter Server with external DNS

28. Which vCenter object is created automatically when deploying VxRail with an external vCenter Server?

Resource Pool

Cluster

Datacenter

VxRail Management user account

29. What is a consideration when adding nodes to a VxRail G Series chassis?

G560 and G410 nodes are permitted in the same chassis

In a full G Series chassis, all nodes must have 10GbE ports

Hybrid and All-Flash nodes are permitted, if in different chassis

All nodes in a G Series chassis must be identical

30. Which series of VxRail nodes supports either Intel or AMD processors and either hybrid or All-Flash storage?

G Series

D Series

E Series

V Series

Page 4 of 4

31. A systems engineer is tasked to configure a VxRail cluster and notices that the VxRail Deployment Wizard fails to launch. The engineer discovers that the software is corrupted.

What should the engineer do to address the issue?

Use the VMware Host Client and iDRAC to access the nodes for troubleshooting

Verify that the JSON file is not corrupted and has all the required values

Return the nodes to the original build state

Check vCenter and troubleshoot the build failure

32. DRAG DROP

Match each VxRail, data protection solution with its functionality.

DES-6322 Specialist-Implementation Engineer-VxRail Exam Updated Questions

DES-6322 Specialist-Implementation Engineer-VxRail Exam Updated Questions

Share this post

Leave a Reply Cancel reply

Related Posts