Fortinet NSE 7 NSE7_SDW-6.4 Dumps Questions

dumps2021-12-27T06:55:28+08:00

NSE7_SDW-6.4 exam is one hot one of Fortinet NSE 7 certification. In real Fortinet NSE7_SDW-6.4 exam, there are 35 multiple-choice questions. Each candidate has 60 minutes to write all the questions. The pass or fail result will show immediately after you finish the test. The available language is English. Free Fortinet NSE 7 NSE7_SDW-6.4 dumps questions are available below.

Page 1 of 2

1. Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two)

It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance

It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links

It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub

It provides direct connectivity between all sites by creating on-demand tunnels between spokes.

2. What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two)

It improves SD-WAN performance on the managed FortiGate devices.

It simplifies the deployment and administration of SD-WAN on managed FortiGate devices

It sends probe signals as health checks to the beacon servers on behalf of FortiGate

It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server

It acts as a policy compliance entity to review all managed FortiGate devices

3. Refer to exhibits.

Exhibit A.

Exhibit B.

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.

Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom

The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces

The implicit rule overrides all other rules because parameters widely cover sources and destinations.

The initial session of an application goes through a learning phase in order to apply the correct rule

4. What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two)

Specify incoming interfaces in SD-WAN rules.

Specify outgoing interface routing cost.

Configure SD-WAN rules interface preference.

Select SD-WAN balancing strategy.

5. Refer to exhibits.

Exhibit A.

Exhibit B.

Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.

Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds

Which statement about the dead member is correct?

Subnets 100.64-1.0/23 and 172.20.0.0/16 are reachable only through port1

SD-WAN interface becomes disabled and port1 becomes the WAN interface

Dead members require manual administrator access to bring them back alive

Port2 might become alive when a single response is received from an SLA server

6. Refer to the exhibit.

Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology

Which two statements are correct if a user in Toronto sends traffic to London? (Choose two)

Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.

The first packets from Toronto to London are routed through Hub 1 then to Hub 2.

Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN

London generates an IKE information message that contains the Toronto public IP address

7. Refer to the exhibit.

Which two statements about the status of the VPN tunnel are true? (Choose two)

There are separate virtual interfaces for each dial-up client

FortiGate created a single IPsec virtual interface that is shared by all clients

100.64.3.1 is one of the remote IP address that comes through index interlace 1.

VPN static routes are prevented from populating the FortiGate routing table

8. Which statement is correct about the SD-WAN and ADVPN?

ADVPN interface can be a member of SD-WAN interface.

Dynamic VPN is not supported as an SD-Wan interface.

Spoke support dynamic VPN as a static interface.

Hub FortiGate is limited to use ADVPN as SD-WAN member interface.

9. Refer to exhibits.

Exhibit A.

Exhibit B.

Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy

FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.

To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?

The shaper mode must be applied per-IP shaper on the traffic shaping policy

The application control profile must be enabled on the firewall policy.

The web filter profile must be enabled on the firewall policy

The URL category must be specified on the traffic shaping policy

10. Which diagnostic command can you use to show the SD-WAN rules interface information and state?

diagnose sys virtual-wan-link neighbor.

diagnose sys virtual―wan―link route-tag-list

diagnose sys virtual―wan―link member.

diagnose sys virtual-wan-link service

Page 2 of 2

11. What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)

The FortiGate cloud key has not been added to the FortiGate cloud portal.

FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager

The zero-touch provisioning process has completed internally, behind FortiGate.

FortiGate has obtained a configuration from the platform template in FortiGate cloud.

A factory reset performed on FortiGate.

Fortinet NSE 7 NSE7_SDW-6.4 Dumps Questions

Fortinet NSE 7 NSE7_SDW-6.4 Dumps Questions

Share this post

Leave a Reply Cancel reply

Related Posts