Implementing Secure Solutions with Virtual Private Networks 300-730 SVPN Updated Dumps

dumps2023-11-24T09:29:13+08:00

Implementing Secure Solutions with Virtual Private Networks 300-730 SVPN exam tests your knowledge of implementing secure remote communications with Virtual Private Network (VPN) solutions. Each candidate has 90 minutes to answer all Cisco 300-730 SVPN exam questions. The available languages are English and Japanese. The Cisco 300-730 SVPN exam price is $300. We have updated Cisco 300-730 SVPN exam dumps, which can make sure you pass the test easily. Free Cisco Certification 300-730 SVPN exam updated questions are below.

Page 1 of 6

1. A second set of traffic selectors is negotiated between two peers using IKEv2.

Which IKEv2 packet will contain details of the exchange?

IKEv2 IKE_SA_INIT

IKEv2 INFORMATIONAL

IKEv2 CREATE_CHILD_SA

IKEv2 IKE_AUTH

2. Refer to the exhibit.

The DMVPN tunnel is dropping randomly and no tunnel protection is configured.

Which spoke configuration mitigates tunnel drops?

A)

Option A

Option B

Option C

Option D

3. On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?

interface virtual-access

ip nhrp redirect

interface tunnel

interface virtual-template

4. Which statement about GETVPN is true?

The configuration that defines which traffic to encrypt originates from the key server.

TEK rekeys can be load-balanced between two key servers operating in COO

The pseudotime that is used for replay checking is synchronized via NT

Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.

5. Refer to the exhibit.

Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)

crypto map

DMVPN

GRE

FlexVPN

VTI

6. Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)

Add NHRP shortcuts on the hub.

Add NHRP redirects on the spoke.

Disable EIGRP next-hop-self on the hub.

Enable EIGRP next-hop-self on the hub.

Add NHRP redirects on the hub.

7. Refer to the exhibit.

A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices.

Based on the syslog message, which action brings up the VPN tunnel?

Reduce the maximum SA limit on the local Cisco AS

Increase the maximum in-negotiation SA limit on the local Cisco AS

Remove the maximum SA limit on the remote Cisco AS

Correct the crypto access list on both Cisco ASA devices.

8. Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)

group-alias

certificate map

optimal gateway selection

group-url

AnyConnect client version

9. Which method dynamically installs the network routes for remote tunnel endpoints?

policy-based routing

CEF

reverse route injection

route filtering

10. Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?

svc import profile SSL_profile flash:simos-profile.xml

anyconnect profile SSL_profile flash:simos-profile.xml

crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml

webvpn import profile SSL_profile flash:simos-profile.xml

Page 2 of 6

11. Refer to the exhibit.

Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?

address-pool

group-alias

group-policy

tunnel-group

12. Refer to the exhibit.

What is configured as a result of this command set?

FlexVPN client profile for IPv6

FlexVPN server to authorize groups by using an IPv6 external AAA

FlexVPN server for an IPv6 dVTI session

FlexVPN server to authenticate IPv6 peers by using EAP

13. Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)

HTTP

ICA (Citrix)

VNC

RDP

CIFS

14. Which configuration construct must be used in a FlexVPN tunnel?

EAP configuration

multipoint GRE tunnel interface

IKEv1 policy

IKEv2 profile

15. A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy.

Which feature can update the client to meet an enterprise security policy?

Endpoint Assessment

Cisco Secure Desktop

Basic Host Scan

Advanced Endpoint Assessment

16. Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)

AnyConnect Auto Reconnect

AnyConnect Network Access Manager

AnyConnect Backup Servers

ASA failover

AnyConnect Always On

17. Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect.

What might be the problem?

The XML profile is not configured correctly for the affected users.

The new client image does not use the same major release as the current one.

Client services are not enabled.

Client software updates are not supported with IKEv2.

18. Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?

tunnel-group (general-attributes)

tunnel-group (webvpn-attributes)

webvpn (group-policy)

webvpn (global configuration)

19. Refer to the exhibit.

Based on the exhibit, why are users unable to access CCNP Webserver bookmark?

The URL is being blocked by a WebAC

The ASA cannot resolve the UR

The bookmark has been disabled.

The user cannot access the UR

20. Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)

When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.

The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.

A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.

When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.

Clientless SSLVPN provides Layer 3 connectivity into the secured network.

Page 3 of 6

21. Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?

single sign-on

Smart Tunnel

WebType ACL

plug-ins

22. Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?

auto-upgrade

auto-connect

auto-start

auto-run

23. Refer to the exhibit.

The customer must launch Cisco AnyConnect in the RDP machine.

Which IOS configuration accomplishes this task?

A)

Option A

Option B

Option C

Option D

24. Refer to the exhibit.

Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)

group-url https://172.16.31.10/General enable

group-policy General internal

authentication aaa

authentication certificate

group-alias General enable

25. Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?

use of certificates instead of username and password

EAP-AnyConnect

EAP query-identity

AnyConnect profile

26. Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?

*$SecureMobilityClient$*

*$AnyConnectClient$*

*$RemoteAccessVpnClient$*

*$DfltlkeldentityS*

27. Refer to the exhibit.

Which VPN technology is allowed for users connecting to the Employee tunnel group?

SSL AnyConnect

IKEv2 AnyConnect

crypto map

clientless

28. Refer to the exhibit.

An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2.

Which type of traffic is being blocked?

ESP packets from spoke2 to spoke1

ISAKMP packets from spoke2 to spoke1

ESP packets from spoke1 to spoke2

ISAKMP packets from spoke1 to spoke2

29. Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?

show crypto ikev2 sa

show crypto isakmp sa

show crypto gkm

show crypto identity

30. In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do

not form.

Which troubleshooting step solves the issue?

Verify the spoke configuration to check if the NHRP redirect is enabled.

Verify that the spoke receives redirect messages and sends resolution requests.

Verify the hub configuration to check if the NHRP shortcut is enabled.

Verify that the tunnel interface is contained within a VR

Page 4 of 6

31. An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE."

Why does this failure occur?

The ISAKMP policy priority values are invalid.

ESP traffic is being dropped.

The Phase 1 policy does not match on both devices.

Tunnel protection is not applied to the DMVPN tunnel.

32. Refer to the exhibit.

The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails.

What is the cause of this issue?

The HostName is incorrect.

The IP address is incorrect.

Primary protocol should be SS

UserGroup must match connection profile.

33. Refer to the exhibit.

A site-to-site tunnel between two sites is not coming up.

Based on the debugs, what is the cause of this issue?

An authentication failure occurs on the remote peer.

A certificate fragmentation issue occurs between both sides.

UDP 4500 traffic from the peer does not reach the router.

An authentication failure occurs on the router.

34. Refer to the exhibit.

Based on the debug output, which type of mismatch is preventing the VPN from coming up?

interesting traffic

lifetime

preshared key

PFS

35. Refer to the exhibit.

The IKEv2 site-to-site VPN tunnel between two routers is down.

Based on the debug output, which type of mismatch is the problem?

preshared key

peer identity

transform set

ikev2 proposal

36. Refer to the exhibit.

Which type of mismatch is causing the problem with the IPsec VPN tunnel?

crypto access list

Phase 1 policy

transform set

preshared key

37. Refer to the exhibit.

What is a result of this configuration?

Spoke 1 fails the authentication because the authentication methods are incorrect.

Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.

Spoke 2 fails the authentication because the remote authentication method is incorrect.

Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.

38. Refer to the exhibit.

Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.

Which command on the ASA is missing?

dns-server value 10.1.1.2

same-security-traffic permit intra-interface

same-security-traffic permit inter-interface

dns-server value 10.1.1.3

39. Refer to the exhibit.

An SSL client is connecting to an ASA headend. The session fails with the message “Connection attempt has timed out. Please verify Internet connectivity.”

Based on how the packet is processed, which phase is causing the failure?

phase 9: rpf-check

phase 5: NAT

phase 4: ACCESS-LIST

phase 3: UN-NAT

40. Which redundancy protocol must be implemented for IPsec stateless failover to work?

SSO

GLBP

HSRP

VRRP

Page 5 of 6

41. Which technology works with IPsec stateful failover?

GLBR

HSRP

GRE

VRRP

42. What are two functions of ECDH and ECDSA? (Choose two.)

nonrepudiation

revocation

digital signature

key exchange

encryption

43. What uses an Elliptic Curve key exchange algorithm?

ECDSA

ECDHE

AES-GCM

SHA

44. Which two remote access VPN solutions support SSL? (Choose two.)

FlexVPN

clientless

EZVPN

L2TP

Cisco AnyConnect

45. Which VPN solution uses TBAR?

GETVPN

VTI

DMVPN

Cisco AnyConnect

46. Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)

show crypto isakmp sa

show ip traffic

show crypto ipsec sa

show ip nhrp traffic

show dmvpn detail

47. Refer to the exhibit.

All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA.

What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?

Same-security-traffic permit inter-interface under Group Policy

Exclude Network List Below under Group Policy

Tunnel All Networks under Group Policy

Tunnel Network List Below under Group Policy

48. Cisco AnyConnect clients need to transfer large files over the VPN sessions.

Which protocol provides the best throughput?

SSL/TLS

L2TP

DTLS

IPsec IKEv1

49. Refer to the exhibit.

Which VPN technology is used in the exhibit?

DVTI

VTI

DMVPN

GRE

50. Which VPN does VPN load balancing on the ASA support?

VTI

IPsec site-to-site tunnels

L2TP over IPsec

Cisco AnyConnect

Page 6 of 6

51. Which parameter must match on all routers in a DMVPN Phase 3 cloud?

GRE tunnel key

NHRP network ID

tunnel VRF

EIGRP split-horizon setting

52. Which parameter is initially used to elect the primary key server from a group of key servers?

code version

highest IP address

highest-priority value

lowest IP address

53. DRAG DROP

Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.

Implementing Secure Solutions with Virtual Private Networks 300-730 SVPN Updated Dumps

Implementing Secure Solutions with Virtual Private Networks 300-730 SVPN Updated Dumps

Share this post

Leave a Reply Cancel reply

Related Posts