NSE8_812 Written Exam Dumps for Fortinet Certified Expert Certification

dumps2024-09-09T15:01:55+08:00

NSE8_812 NSE 8 – Network Security Expert 8 Written Exam dumps are the best material for you to pass the written exam and get Fortinet Certified Expert (FCX) certification. Firstly, you need to study the NSE8_812 exam information. There are 60 questions in the real NSE8_812 exam, and you have 120 minutes to finish the test. You can take the NSE8_812 exam at Pearson VUE Test Centers and OnVUE. Our new cracked NSE 8 – Network Security Expert 8 Written NSE8_812 exam dumps can help you study all the related topics. Free Fortinet Certified Expert certification NSE8_812 exam dumps are available below.

Page 1 of 2

1. Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

1 redundant packet for every 10 base packets

3 redundant packet for every 5 base packets

2 redundant packet for every 8 base packets

3 redundant packet for every 9 base packets

2. You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)

Enabling bandwidth control between the ISF and the NP will change the output

The output is showing a packet descriptor queue accumulated counter

Enable HPE shaper for the NP6 will change the output

Host-shortcut mode is enabled.

There are packet drops at the XAU

3. Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

4. What is the benefit of using FortiGate NAC LAN Segments?

It provides support for multiple DHCP servers within the same VLA

It provides physical isolation without changing the IP address of hosts.

It provides support for IGMP snooping between hosts within the same VLAN

It allows for assignment of dynamic address objects matching NAC policy.

5. You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients' mail.

What are two possible reasons for this problem? (Choose two.)

A. The FortiMail access control rule to relay from Office 365 servers FQDN is missing.

B. The FortiMail DKIM key was not set using the Auto Generation option.

C. The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

D. A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.

6. Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.

Which two statements correctly describe the expected behavior when running this template? (Choose two.)

The Jinja template will automatically map the interface with "WAN" role on the managed FortiGate.

The template will work if you change the variable format to $(WAN).

The template will work if you change the variable format to {{ WAN }}.

The administrator must first manually map the interface for each device with a meta field.

The template will fail because this configuration can only be applied with a CLI or TCL script.

7. SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.

You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.

What should you configure?

Configure local out traffic to use the outgoing interface based on SD-WAN rules with a manual defined IP associated to a loopback interface and configure an SD-WAN rule from the loopback to the DNS server.

Configure an SD-WAN rule to the DNS server and use the FortiGate interface IPs in the source address.

Configure two DNS servers and use DNS servers recommended by the two internet providers.

Configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server.

8. Refer to the exhibits.

Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

A)

Option A

Option B

Option C

Option D

9. An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

600ms

200ms

300ms

100ms

10. Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting.

Which statement is true for the synchronization of fabric-objects?

Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT__2.

Objects from the root FortiGate will not be synchronized to any downstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT_3.

Page 2 of 2

11. Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.

What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors

without affecting the DR/BDR election?

A)

Option A

Option B

Option C

Option D

12. A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.

CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.

Which two options can resolve this situation? (Choose two.)

Change the persistence rule to LB_PERSIS_SSL_SESSJ

Add more web servers to the real server poof

Disable SSL between the FortiADC and the web servers

Add a connection-pool to the FortiADC virtual server

13. Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

Geographical IP policies are enabled and evaluated after local techniques.

Attackers can be blocked before they target the servers behind the FortiWeb.

The IP Reputation feature has been manually updated

An IP address that was previously used by an attacker will always be blocked

Reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored

14. Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.

You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.

How should the initial connection be made?

Connect the switch on any interface between ports 21 to 24

Connect the switch on any interface between ports 25 to 28

Connect the switch on any interface between ports 1 to 4

Connect the switch on any interface between ports 5 to 8.

15. Which feature must you enable on the BGP neighbors to accomplish this goal?

Graceful-restart

Deterministic-med

Synchronization

Soft-reconfiguration

16. Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.

In this scenario, which configuration change will meet this requirement?

Change the load-balance-mode to source-ip-based.

Create a new static route with the internet sdwan-zone only

Configure the cost in each overlay member to 10.

Configure the priority in each overlay member to 10.

17. Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work

Based on the information given in the exhibits, what must be done to fix this?

On FG-1 port1, the ftm access protocol must be enabled.

FAC-1 must have an internet routable IP address for push notifications.

On FG-1 CLI, the ftm-push server setting must point to 100.64.141.

On FAC-1, the FortiToken public IP setting must point to 100.64.1 41

18. Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.

Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

A. You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

B. Traffic on AccountVInk and SalesVInk will not be accelerated.

C. The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

D. Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

E. OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

19. You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor.

Which adapter type for the NICs will you recommend?

Native ESXi Networking with E1000

Virtual Function (VF) PCI Passthrough

Native ESXi Networking with VMXNET3

Physical Function (PF) PCI Passthrough

NSE8_812 Written Exam Dumps for Fortinet Certified Expert Certification

NSE8_812 Written Exam Dumps for Fortinet Certified Expert Certification

Share this post

Leave a Reply Cancel reply

Related Posts