Nutanix NCP-CI-Azure Exam Dumps Help You Pass Nutanix Certified Professional - Cloud Integration - Azure - Free Latest Dumps for IT Certification Exams

Nutanix NCP-CI-Azure Exam Dumps Help You Pass Nutanix Certified Professional – Cloud Integration – Azure

dumps2024-07-27T10:01:46+08:00

NCP-CI-Azure Nutanix Certified Professional – Cloud Integration – Azure exam is easy for you to pass now. There are 75 multiple-choice questions in the real NCP-CI-Azure exam, and you have 120 minutes to answer all the questions. The available language is English. We provide the latest Nutanix NCP-CI-Azure exam dumps, which can ensure you pass. After you get certified, you will have 2 years of general IT experience, 12 months of experience using Nutanix technologies, and 6 months of experience using the Azure public cloud provider. Free Nutanix Certified Professional NCP-CI-Azure exam dumps are available below.

Page 1 of 3

1. An administrator is tasked with preparing the company's Azure subscription for use with NCZ.

Which two Azure Resource Providers need to be registered? (Choose two.)

Microsoft.HybridNetwork

Microsoft.Network

Microsoft.Nutanix

Microsoft.HybridCompute

2. What is the minimum number of nodes needed to deploy an RF3 NC2 cluster?

3. An administrator has recently deployed an NC2 on azure cluster, but does not have connectivity back to the on-premises environment. The administrator would like to start working on configuring the new cluster.

What is the best way to get access to Prism Central?

Deploy a Jump Host in an external VNet and peer the VNets for communication between Prism Central VNet and the Jump Host VNet.

Deploy a Jump Host instance in the same subnet as the bare-metal.

Deploy a Jump Host in an external VNet and peer the VNets for communication between bare-metal VNet and the Jump Host VNet.

Deploy a Jump HostInstanceIn the Prism Central VNet inside a delegated subnet

4. An administrator is tasked with allowing inbound connectivity for a user VM that resides on a NAT network. The …… communicating successfully with other VMs in the NAT network.

The cluster has the following characteristics

A Transit VPC exists

* A User VPC exists

* A NAT subnet has been created

* 25 floating IP addresses are in use by other VMs

* Routes have been configured

When the administrator attempts to assign a floating IP address to the VM, none are available.

What is the reason for this?

An external DHCP server needs to be deployed into the cluster.

An additional Flow Gateway instance is required.

Geneve encapsulation only supports 25 Floating IP addresses.

Additional floating IP addresses need to be requested.

5. An NC2 on Azure environment requires that outside networks are allowed to be routed to a Nutanix User VPC from outside the cluster when using a No-Nat path.

Which configuration will satisfy this requirement?

Internally routable network address which shares the same address space of the Nutanix set VPC

Externally routable IP address which shares the same address space of the Native Azure Subnet

Internally routable network address which shares the same address space of the Native Azure Subnet

Externally routable IP address which shares the same address space of the Nutanix User VPC

6. An administrator needs to configure the correct outbound requirement for a successful cluster deployment in Azure.

Which destination must have an outbound rule to meet this requirement?

Https://portal.nutanix.com/*

Https://downloads.cloud.nutanix.com/*

Https://support.nutanix.com/*

https://nutanix.dev/*

7. Exhibit.

An administrator is trying to create an NC2 cluster in Azure, but does not see the required region in the drop-down list.

Which two steps could the administrator take to resolve this issue? (Choose two.)

Check the Azure subscription is created in the correct region.

Check the list of regions specified under the NC2 organization cloud account.

Check the NC2 Billing console to ensure the region is listed.

Ensure that the Azure region is whitelisted for use by Microsoft in the subscription.

8. An administrator manager a virtual desktop environment running on an NC2 cluster in Azure.

The desktop running on the cluster need to contact resources on-premises through the ExpressRoute that has been setup. The save on bandwidth from the on-premises environment to Azure, the administrator wants the desktops to access the internet through an Azure NAT Gateway.

Which co0nfigruation will best accomplish this task?

Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-No-NAT network.

Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network. Set a route to the on-premises subnet for the Nutanix User VPC pointing to the external-No-NAT network.

Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network. Set a route to the on-premises subnet for the Nutanix User VPC pointing to the external-NAT network.

Assign all desktops Floating IPs and use an external-NAT network in the transit VP

Set the default route of 0.0.0.0/0 for the Nutanix User VPC pointing to the external-NAT network.

9. Which action should the administrator take to troubleshoot the error shown in the exhibit?

Check the NC2 organization permissions.

Check the Azure AD App registration Client Secret.

Check the Azure subnet delegation status.

Check the PC VNet is peered correctly.

10. An organization want to use existing Azure resources to deploy NC2.

What is a valid requirement to use existing Azure resources for this task?

More than two DNS servers must be used.

A new Azure resource group must be created where all resources, such as VNets must be created.

Azure NAT gateway must be attached to the cluster management Prism Central, and external Flow Gateway subnets.

The fastpathenabled tag must be added after creating a NAT gateway.

Page 2 of 3

11. Which statement best describes south bound traffic to a Nutanix User VPC originating outside the BC2 cluster when using a no-NAT (routed path) having two or more Flow Gateways (FGW)?

A BGP gateway runs on the CVM of the bare-metal hosts. The BGP gateway advertises externally routable IP addresses to the Azure Route Server, with each active FGW external IP address the next hop.

A BGP gateway runs inside of Prism Central. The BGP gateway advertises externally mutable IP addresses to the Azure Route Server, with each active FGW external IP address as the next hop.

A BGP gateway is deployed as Azure native VMs in the Prism Central VNet. The BGP gateway advertises externally routable IP addresses to the Prism Central, with each active FGW external IP address as the next hop.

A BGP gateway is deployed as Azure native VMs in the Prism Central VNet. The BGP gateway advertises externally routable IP addresses to the Azure Route Server, with each active FGW external IP address as the next hop.

12. An administrator has been asked to create a cluster to support new workloads.

What are the maximum number of nodes supported in an NC2 on Azure environment?

14 nodes

18 nodes

24 nodes

28 nodes

13. A company is extending asubnet from their on-premises environment to an NC2cluster on Azure. The company is considering using either a Virtual Tunnel End Point (VTEP) or a layer 2 subnet Extension over VPN.

In which two scenarios would it be advantageous to use VTEP for this requirement? (Choose two.)

A. Connectivity between sites already provides encryption.

B. Only one remote Availability Zone exists that needs the subnet extended.

C. Connectivity between sites already does not provided encryption.

D. Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet.

14. Exhibit

An NC2 on Azure cluster was deployed with two Flow Gateway in HA (FHW1 and FGW2). After a week of use, four bare-metal nodes were added to the NC2 cluster and additional workloads were added. The existing workloads were using floating IPs to allow inbound traffic to communicate with the running workloads on the NC2 cluster.

It was determined that additional bandwidth for north/south traffic would be needed. Two additional Flow Gateways were added (FGW3 and FGW4) from the NC2 portal configuration menu.

The existing workloads prior to expansion on the NC2 cluster will be able to use which Flow Gateways using the NAT traffic path after the expansion?

They will be able to use FGW3 and FGW4 once the NC2 workloads reboots.

All four Flow Gateways using a MAC/Hash algorithm.

Only the Flow Gateway each workload was using prior to expansion.

All four Flow Gateways.

15. An administrator is planning to expand an NC2 on Azure cluster.

Which statement is true regarding prerequisites for expanding the cluster?

Cluster must be in a Cluster Stopped state.

Cluster must have at least three nodes.

Cluster must be in a Cluster Connected state.

Cluster must have at least five nodes.

16. An administrator is tasked with creating a new subnet for a group of VMs that require inbound internet access. Internal private addresses must be obscured to servers on the public internet.

Which network is best suited for satisfying this requirement?

Bastion based network

No-NAT based network

Layer 2 Stretch network

NAT based network

17. An administrator is tasked with configuring connectivity between an on-premises datacenter and Azure.

Which two connectivity options are supported? (Choose two.)

VPN

Direct Connect

ExpressRoute

Leased Line

18. A company has just adopted Nutanix as their technology of choice and is preparing to deploy Nutanix Cloud Clusters (NC@)

Which step must be taken first to gain access to the NC2 console?

Start a free trial via Billing Portal.

Navigate to doud.nutanix.com.

Create a My Nutanix account.

Open a support case with Nutanix.

19. What is an available log module when configuring a syslog server in the Prism Central Admin Center?

Prism

Zookeeper

API Audit

Acropolis

20. A company wants NC2 networking components to be created manually with the correct naming conversation. To achieve this the administrator manually creates the PC and Host VNets in Azure.

What additional Azure Network components must the administrator manually create?

NAT Gateways. Delegated Subnets, Flow Gateway Subnets, Transit VPC

NAT Gateways, Delegated Subnets, Flow Gateway Subnets, VNet Peers

internet Gateways, Private Endpoints, Flow Gateway Subnets, VNet Peers

Internet Gateways. Delegated Subnets, Flow Gateway Subnets, VNet Peers

Page 3 of 3

21. What will be observed in the NC2 cluster when terminating a node from the Azure portal?

NC2 will shutdown the node.

NC2 will continue re-provisioning the node.

NC2 will terminate the node from the cluster.

NC2 will mark the node as degraded.

22. When configuring an alert email in Prism Central deployment within an NC2 environment, what is required in order for the emails to be sent properly?

SMTP server configured in Prism Central Settings

A whitelisted public cloud console endpoint

Cluster Super Admin permissions

Name servers configure in Prism Central

23. An administrator is tasked with providing User VMs in Azure that are hosted within a Flow NAT network outbound internet connectivity.

In which order would the traffic flow through each component?

User VM >Flow Gateway > Floating IP Address > Azure NAT GW

User VM >Floating IP Address > Flow Gateway > Azure LB

User VM > Delegated Subnet > Flow Gateway > Floating IP Address > Azure LB

User VM > Delegated Subnet > Flow Gateway > Floating IP Address > Azure NAT GW

Nutanix NCP-CI-Azure Exam Dumps Help You Pass Nutanix Certified Professional – Cloud Integration – Azure

Nutanix NCP-CI-Azure Exam Dumps Help You Pass Nutanix Certified Professional – Cloud Integration – Azure

Share this post

Leave a Reply Cancel reply

Related Posts