Nutanix NCP-MCI-6.5 Exam Questions and Answers

dumps2023-04-21T09:28:18+08:00

Nutanix certification NCP-MCI-6.5 exam information is helpful for you to understand the test. There are 75 multiple-choice questions in the real Nutanix NCP-MCI-6.5 exam, and you have 120 minutes to answer all the questions. The test languages are English and Japanese. Each candidate needs to pay $199 to register Nutanix NCP-MCI-6.5 exam. The required passing score is 3000. Our Nutanix certification NCP-MCI-6.5 exam questions and answers are valid in preparation. Free Nutanix NCP-MCI-6.5 exam questions and answers are below.

Page 1 of 6

1. Refer to exhibit:

Why has an anomaly been triggered?

Controller reached 2500 IOP

Observed IOPS exceed normal values.

Normal Controller behavior has increased.

Observed values do not match predicted values.

2. An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.

What must be changed to enable full inter-VM communications?

Change the spanning-tree port type on the switch.

Change the network the VMs are connected to

Update the switch to specifically allow VLAN 15

The VMs need to have static IP addresses.

3. When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?

2000

2074

8080

9943

4. An administrator wants to ensure that data in a container is stored in the most space efficient manner as quickly as possible after being written,

Which space efficiency too meets this requirement?

Inline Compression

Thin Provisioning

Cache Deduplication

Erasure Coding

5. An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.

Which initial step was missed during the post process cluster configuration?

Setting the cluster time zone via PC GUI

Setting the cluster time zone via CVM NCLI

Setting the cluster time zone via PE GUI

Setting the cluster time zone via CVM ACLI

6. An administrator wants to reduce the largest amount of alert emails received from Prism Central.

Which two settings should the administrator customize to meet this requirement? (Choose two)

Skip empty digest email

Every Single Alert

Dally Digest

Email Recipients

7. A configuration is single domain, single forest, and does not use SSL.

Which port number should be used to configure LDAP?

389

3269

636

3268

8. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

Cluster IO, Network, Database and App Server CPU

Cluster CPU and Memory Only

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

9. A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.

Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

Create separate VLANs that map 10GbE and 1GbE interfaces.

Createbond1 on virbr0 and add the 1GbE interfaces to it for VM use.

Create a second bond on br0 on each host and assign the 1 GbE interfaces to it.

Create a second bridge on each host and assign the 1GbE interfaces to it.

10. An administrator manages an AHV cluster that is dedicated to a dev/test environment. The administrator receiving complaints from users that they are unable to create new VMs on the cluster.

After the reviewing the cluster, the administrator finds that the memory resources are almost fully utilized, with many VMs over-provisioned on memory.

What option is the most efficient resolution to enable additional VMs to be created?

Enable Memory Overcommit on the over-provisioned VMs.

Enable Memory HA on the over-provisioned VMs.

Upgrade the nodes with additional memory DlMMs.

Disable HA Reservation on the cluster.

Page 2 of 6

11. What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

A Live Migration will be performed on the affected VMs.

The host will automatically redirect I/O and VMs will continue running.

The impacted host and VMs will automatically shut down.

VM High Availability will restart the impacted VMs on another host

12. Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?

Live Migration

Storage vMotion

Nutanix Move

Cloud Connect

13. What is the name of the internal bridge used by AHV nodes and CVMs?

vnet0

br1

br0

virbr0

14. An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.

Which two steps should be taken to prepare for this task? (Choose two.)

Reconfigure IPMI for the new datacenter

Shut down all user VMs in the cluster

Relocate the linked LDAP server

Stop all Nutanix Files clusters

15. Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Disable encryption on the cluster

Deploy an additional Native KMS Server

Enable encryption for a VM

Change Native KMS to External KMS

16. An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons.

The administrator puts the host in maintenance mode.

What should the administrator do to perform an orderly shutdown of the CVM?

Execute the cvm_shutdown -P new command from the CV

Enter Fever off Server - immediate from the IPMI console.

Enter Fewer off Server-orderly Shutdown from the IPMI console.

Execute the cvm_shutdown -P now command from the host.

17. An administrator logs into the Nutanix Support Portal and notices there is a new version of

the LCM Framework available. In an effort ensure LCM is providing the latest features, the administrator would like to upgrade LCM.

How can the LCM Framework be upgraded?

Perform an LCM inventory

Upload the latest LCM Framework as an image in the image Configuration in Prism

Upload the latest LCM Framework bundle via Upgrade Software in Prism

Upgrade AOS

18. Which baseline is used to identify a Zombie VM?

VM is powered off for the past 21 days.

Memory usage is less than 1% and memory swap rate is equal to 0 Kbps for the past 21 days. VM has no logins for the past 21 days

VM has no logins for the past 21 days

Fewer than 30 1/Os and less than 1000 bytes per day of network traffic for the past 21 days

19. In the event of a disk failure, which process will immediately ad automatically scans Cassandra to find all data previously hosted on the failed disk, and all disks in that node?

Curator

Stargate

Genesis

Prism

20. Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

Continuous Data Protection

Copy-on-Write

Split-mirror

Redirect-On-Write

Page 3 of 6

21. How will an HDD failure affect VMs with data on the failed device?

The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.

A live migration will be initiated, moving the affected VMs to a host that contains the replica data.

The VMs will remain operational on that host and continue to function normally with no noticeable impact

An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.

22. After configuring Active Directory as the desired authentication service, an administrator is not able to login into Prism Central using privileged account.

Which configuration must be checked first?

Account lock status

Role Mapping

Local user account

Cluster Lockdown

23. After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?

Which two updates can be done while avoiding a host reboot? (Choose two.)

2 Drives

AHV

Data Drives

AOS

24. Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)

Grant a user permission to create VMs on a specific storage container

Grant a user permission to view details of all VMs on a specific cluster

Grant an active directory group permission to perform back operations

Grant a user permission to create and delete snapshots on a specific VM

25. An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:

Four blocks

One node per block

Will the administrator be able to accomplish these tasks?

No-Fault tolerance changes are not supported.

Yes-FT2 requires a minimum of three nodes.

Yes-Block awareness requires a minimum of three blocks.

No-FT2 requires a minimum of five nodes.

26. What requires iSCSI initiator configuration in the guest OS to use Volumes?

SQL Server Always On Availability Group

Microsoft Windows Failover Cluster

Oracle RAC

Exchange DAG

27. An administrator has set up a local web server accessible to the Nutanix clusters.

Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.

Edit LCM Advanced Settings in Prism Element and enter the address of the web server.

Edit LCM Advanced Settings m Prism Central and enter the address of the web server.

Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.

28. Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?

Cassandra

Distributed Storage Fabric

High Availability

Acropolis App Mobility Fabric

29. Refer to the exhibit.

Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)

Host password changes

Password policy changes

BIOS password changes

CVM password changes

30. A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network.

The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:

IP address:172,16.1.2

Network Mask: 255.255.255.0

Default gateway: 172.16.1.1

VLAN:1

The same parameters were used to create a network profile on Nutanix, but the when the VM was on …

What should the Nutanix administrator do to fix this issue?

Nutanix removed support for native VLA

Change VLAN field from vlan. 1 to vlan.0.

Enable IPv6 on the V

Use DHCP as opposed to static IP

Page 4 of 6

31. An administrator wants to expand the Failure Domain level of a cluster.

What two options are available? (Choose two.)

Node

Data Center

Block

Rack

32. An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Connect the 10Gb interfaces to the physical switch.

Change the bond mode to balance-slb or balance―tcp.

Remove any 1Gb interfaces still connected from the default bond.

Add a new switch to the network and connect 1Gb interfaces to it.

Change the VLAN ID to a higher priority I

33. An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

The CD-ROM interface is too slow.

The administrator selected a disk attached before it can boot to a C

The VM needs to have a standard disk attached before it can boot to a C

The bootable CD image is corrupted during creation.

34. Refer to Exhibit:

Why has an anomaly been triggered?

Because the CPU usage crossed the blue band.

Because the blue band range increased over the last 2 days

Because the CPU usage dropped belon' 20%

Because the CPU usage reached 100%

35. An administrator is tasked with configuring networking on an AHV cluster and needs to optimize for maximum single VM throughput.

Which bond mode should the administrator select?

Active-Active with Mac pinning

Active-Active

Active-Backup

No Uplink Bond

36. An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.

Which method should be used to anonymize the log data sent to Nutanix Support?

A)

Option A

Option B

Option C

Option D

37. An administrator recently added new SSDs to a Nutanix cluster and knows the firmware will be out of date, Due to security constraints, the cluster does not have access to the Internet.

Which two steps must be completed to update the firmware? (Choose two.)

Download the disk firmware from the OEM's website.

Download a darksite bundle and deploy an internal webserver,

Select Upgrade Software, then upload the firmware bundle.

update the LCM Source and URL to access the firmware bundle.

38. What is Prism Central primarily used for?

Multi-cluster network configuration

Container creation

Multi-cluster Single Sign On

Data reduction configuration

39. Refer to the exhibit.

An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds

When attempting to add the node to the cluster with the Expand Cluster function in Prism, the cluster is unable to find the new node.

Based on the above output from the new node, what is most likely the cause of this issue?

The ports on the upstream switch are not configured for LAC

The existing and the expansion node are on different VLANs.

There is a firewall blocking the discovery traffic from the tlu

LACP configuration must be completed after cluster expansion

40. Which capability refers to the storage of VM data on the node where the VM is running and ensure that the read I/O does not have to traverse the network?

Intelligent Locally

Data Locality

Intelligent Tiering

Data Tiering

Page 5 of 6

41. On a Nutanix cluster, what does Network Segmentation refer to?

A distributed firewall for security VM to VM traffic.

Physically separating management traffic from guest VM traffic.

Isolating intra-cluster traffic from guest VM traffic.

Isolating management traffic from storage replication traffic.

42. How should an administrator enable secure access to Volumes using a password?

iSER

CHAP

SAML

LDAP

43. When a configuring a syslog server in Prism Central, what two pieces information are required? (Choose two.)

HTTPS URL

Encryption secret

Transport protocol

IP address/port

44. An administrator has been tasked with increasing security on Nutanix cluster by disabling password authentication when accessing the CVM and AHV hosts and instead moving to key-based SSH,

What is the easiest way for the administrator to meet these needs?

Configure LDAP authentication through a secure server,

Enable STIES vie commend line on SSH to CV

Enable Cluster Lockdown and provide an RSA key.

Restrict access with User Management in Prism.

45. Prism Central will be installed manually on an AHV cluster.

Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)

var

tmp

boot

home

data

46. An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.

How should the administrator meet this requirement?

Create one container and set capacity reservation

Create two containers and reserve space for containers

Create one container and enable compression

Create two containers and reserve space for vDisks

47. Refer to Exhibit:

An administrator needs to enable inline deduplication for a pre-existing storage container.

When trying to enable deduplication on the storage container. this feature is grayed-out.

What is the reason for this behavior?

Replication Factor 1 is configured on the storage container.

The cluster has less than 5 nodes which is the minimum node-count to enable deduplication.

Capacity reservation is not enabled on the storage container.

The cluster has hybrid storage and deduplication is supported only on all-flash clusters.

48. An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.

But users are reporting disk latency.

What could cause the performance issues?

Flash mode is disabled when a node fails.

Compression is disabled on the vDisk storage container.

The VMs vDisks are in multiple containers.

Data size for flash mode exceeds 25% of the SSD capacity.

49. Which node type does not deploy a Nutanix Controller VM?

Storage Only

Hyper Converged

Compute Only

All Flash

50. Which Nutanix service control ncli, the HTML5 UI, and Rest API?

Prism

Cassandra

Zookeeper

Chronos

Page 6 of 6

51. An administrator needs to provide access for a user to view real-time performance metric for all VMs on all clusters across the datacenter.

Which method accomplishes this with the least effort and ongoing maintenance?

Configure IDP authentication and assign the user to the Cluster Admin role in Prism Central.

Configure AD authentication and assign the user to the Viewer role in Prism Element.

Configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs

52. A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk.

What are these vDisk copies called?

Disk Clones

Golden Images

Volume Groups

Shadow Clones

Nutanix NCP-MCI-6.5 Exam Questions and Answers

Nutanix NCP-MCI-6.5 Exam Questions and Answers

Share this post

Leave a Reply Cancel reply

Related Posts