SAP Certified Application Associate C_TS422_2020 Online Dumps Questions

dumps2021-08-26T06:32:10+08:00

SAP Certified Application Associate C_TS422_2020 online dumps questions are available, which validates that the candidate possesses the fundamental and core knowledge required of the SAP S/4HANA Manufacturing consultant profile. Knowing SAP certification C_TS422_2020 exam information is also helpful in the preparation.

In real SAP C_TS422_2020 exam, there are 80 questions, and you have 180 minutes to complete all the questions. The required passing score of SAP certification C_TS422_2020 exam is 56%. The test languages are English and Japanese. Free SAP Certified Application Associate C_TS422_2020 online dumps questions are available below.

Page 1 of 2

1. What could be the reason for multiple commitment of individual capacities, where several operations have the same scheduled dates on a resource after capacity planning? Note: There are 2 correct answers to this question.

Alternative resources are fully occupied.

The Change Planning Direct on indicator is set.

The work center has several individual capacities.

The planning strategy is infinite.

2. You want to insert an operation at a certain time on a work center. The planning direction is forward. The desired dispatching time coincides with an operation that has previously been

dispatched .

How does the insertion take place?

The new operation is inserted at the desired time; the previously dispatched operation is moved forward.

The new operation is inserted at the desired time the previously dispatched operation is moved backward.

The previously dispatched operation stays as is the new operation is insertedafter the dispatched operation.

The previously dispatched operation stays assist the new operation is inserted before the dispatched operation.

3. What do you use to schedule operations from planned orders so that the production plan can be fulfilled?

Demand Planning (DP)

Material Requirements Planning (MRP)

Capacity Requirements Planning (CRP)

Supply Network Planning (SNP)

4. What does it mean for the production planner when MRP works with infinite capacities?

MRP assigns capacity requirements automatically to work center is with the earliest available capacity.

MRP creates capacity requirements without checking the capacity of a work center.

MRP creates capacity requirements only if the work center has sufficient capacity.

MRP assigns capacity requirements automatically after the last scheduled order on a work center.

5. What determines whether the planned independent requirements in MRP consume other requirements?

Requirements type

Order type

Requirements profile

Consumption sequence procedure

6. What does the industry sector determine? Note: There are 2 correct answers to this question.

Whether a material master fieldis required, changeable, displayed, or hidden

Which transaction you can use to create a new material

Which material master views can be maintained

Whether material numbers are assigned internally or externally

7. If you use floats to limit dispatching in capacity planning, what type of time element can be reduced by strategy settings while dispatching?

Queue time

Production time

Minimum wait time

Goods receipt processing time

8. A material has been set up as a phantom assembly by entering the special procurement key in the material master .

How can you switch off the phantom assembly in a specific bill of material (BOM)?

Change the item category of the phantom assembly in the BO

Change the explosion type of the phantom assembly in the BO

Change the phantom item indicator for the phantom assembly in the BO

Change the special procurement key of the phantom assembly in the BO

9. What is the difference between co-products and by-products?

Only co-products can be manufactured in isolation from the main product.

Only by-products have a zero inventory valuation.

Only co-products are identified by a special item category in the bill of material (BOM).

Only co-products appear in the processor production order settlement rule.

10. When can the material availability check occur automatically in a production order? Note: There are 2 correct answers to this question.

At order confirmation

At order settlement

At order release

At order creation

11. How can you limit the validity of a bill of material (BOM)? Note: There are 2 correct answers to this question.

By plant

By material type

By period

By industry

12. Which of the following processes lead to an entry in the MRP planning file? Note: There are 3 correct answers to this question.

Change of the material'sprocurement type

Creation of a purchasing contract

Change of the storage bin

Creation of dependent requirements

Creation of a sales order

13. Which time elements does MRP consider in backward scheduling to determine the order dates for components from dependent requirements? Note: There are 2 correct answers to this question.

Total replenishment lead time

Operation duration

In-house production time

Planned delivery time

14. You need to model goods receipt processing time in Detailed Scheduling .

Which modelling options do you have? Note: There are 2 correct answers to this question.

Model a handling resource in the location master and goods receipt time in the mater all master.

Model a separate resource in the production data structure.

Model a resource inbound in the location master.

Model a transportation resource in the location master.

15. Which time elements can be reduced by a reduction strategy? Note: There are 3 correct answers to this question.

Wait time

Goods receipt processing time

Float after production

Queue time

Move time

16. When do you use variant bills of materials (BOMB)?

When multiple material is have similar BOMB

When a material has multiple BOMB

When multiple material also have the same BOM

When a material has a configurable BOM

17. How can you set up the supply source for the SAP Kanban process? Note: There are 3correct answers to this question.

Using purchase orders for external procurement

Using stock transfer reservations for stock transfer

Using run schedule quantities for in-house production

Using purchasing costs for automated source prioritization

Using quotations for internal and external procurement

18. If the stock level drops below the reorder stock in reorder point planning, what is the system logic to trigger procurement?

Fill up to the maximum stock level

Fill up to the reorder stock level

Fill up based on the lot size procedure

Fill up to the safety stock level

19. The MRP run detected a shortage of a material that you source from an external supplier in full pallets .

How can you make sure you will only receive full pallets?

Use the reorder point.

Use the minimum order quantity.

Use the fixed lot size procedure.

Use the MRP type for vendor managed inventory.

20. An issue storage location was NOT found through the work center, bill of material (BOM) item, or material master .

What determines whether the storage location can be derived from the production version?

Plant Data

MRP Profile

MRP Group

MRP Controller

Page 2 of 2

21. Which chart types does the tabular planning table provide in SAP S/4HANA? Note: There are 2 correct answers to this question.

Order (pool) chart

Capacity requirements chart

Orders (dispatched) chart

Work center capacities chart

22. You want to perform capacity availability checks on your production orders .

What must be set for this to occur? Note: There are 2 correct answers to this question.

Checking control must have an overall profile assigned in customizing.

Indicator Relevant for finite scheduling must be set.

Checking rule and group must be assigned.

PRT Availability check must be set.

23. Where do you maintain the duration of a production operation?

Bill of material (BOM)

Work instructions

Material master

Routing

24. You want to triggering-house production of a semi-finished mater al before a sales order for the corresponding finished good is received .

Which planning strategy supports the consumption of planned independent requirements for the semi-finished material?

Make-to-order production (20)

Planning without final assembly (50)

Planning with final assembly (40)

Planning at assembly level (70)

25. In a production process, you need acertain amount of liquid as input material. The source tank is directly connected to the reactor .

How can you process consumption postings?

Kanban

Picking list

Backflushing

Transfer Order

26. For a production version to be valid and consistent what requirements must be fulfilled?

Note: There are 3 correct answers to this question.

The lot size range must be within the lot-size range of the assigned routing.

The assigned routing must be a rate routing.

The deletion flag must NOT be set for the bill of materials (BOM) or the routing.

The assigned routing and bill of materials (BOM) must be valid in the entire validity period.

The assigned routing must NOT have alternative sequences.

27. Which bill of material (BOM) categories can you define in SAP S/4HANA? Note: There are 2 correct answers to this question.

Functional Location BOM

Sales Order BOM

Class BOM

Work Center BOM

28. What does forecasting in the demand planning cycle include? Note: There are 3 correct answers to this question.

Market intelligence

Past quotation quantities

Past procurement quantities

One-off events

Past sales order quantities

29. In your project,you have several materials that are planned by different people .

How can

you assign the planning responsibility?

MRP type

MRP group

MRP controller

MRP planning file

30. What are the possible results of a production planning run in Advanced Planning (PP/OS)? Note: There are 3 correct answers to this question.

Stock transport order

Production order

Scheduling agreement schedule line

Purchase requisition

Planned order

31. You want to reduce planning efforts for B/C materials .

Which planning procedure do you recommend?

Manual planning without check

Forecast planning

Material requirements planning

Consumption-based planning

32. How can SAP S/4HANA support a GMP compliant production process? Note: There are 3 correct answers to this question.

Documentation of quality data with Quality Management

Predefined GMP compliant process order types to meet audit requirements

Use of the GMP compliant flag in relevant master data applications

Use of the digital signature function to check and run business processes

Recipe approval (with Engineering Change Management)

SAP Certified Application Associate C_TS422_2020 Online Dumps Questions

SAP Certified Application Associate C_TS422_2020 Online Dumps Questions

Share this post

Leave a Reply Cancel reply

Related Posts