Specialist-Implementation Engineer PowerEdge Version 2.0 DES-4122 Questions

dumps2022-01-12T06:36:36+08:00

Specialist-Implementation Engineer PowerEdge Version 2.0 DES-4122 exam contains 2 parts. Part 1 includes 54 questions, and you have 90 minutes to write the test. The required passing score of DES-4122 exam is 63%. Part 2 includes 6 Simulations, and you have 30 minutes to complete this part. The required passing score is 66%. DES-4122 exam candidate needs to pass both parts to pass this test. Free DELL EMC DES-4122 exam questions are available below.

Page 1 of 2

1. A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.

Which setting should the technician change in Processor Settings in the System BIOS?

System Profile

Virtualization Technology

HyperThreading

Number of Cores per Processor

2. CORRECT TEXT

For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.

3. A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode .

What is the minimum size DIMM supported for this type of memory?

64 GB

128 GB

256 GB

512 GB

4. What is required to use the iSM Automatic System Recovery feature?

Server Administrator installed

OS watchdog timer disabled

Server Administrator not installed

OS watchdog timer enabled

5. DRAG DROP

What is the correct order of steps taken during the BIOS/UEFI Recovery process?

6. When does a customer require the Service Tag of the Dell EMC PowerEdge server?

First time logging in to iDRAC

First time accessing the BIOS

Activating the OS

Obtaining warranty information

7. A technician working with a Dell EMC PowerEdge 1 take corrective action?

Check the System Event Log Check PSU LED Reseat the PSU

Check the System Event Log Check PSU LED Do a virtual reseat of the iDRAC

Check the LCC Log Check PSU LED Reseat the CPU

Check the LCC Log Check PSU LED Reseat the PSU

8. What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

Network share

vFlash SD card

USB Flash drive

IDSDM SD card

9. A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber.

What should they do to take corrective action upon checking the System Event log?

A)

Option A

Option B

Option C

Option D

10. What can be done using in-band management?

Agentless discovery

Firmware and driver updates

Network bandwidth optimization

Remote access

Page 2 of 2

11. What is a key feature introduced in OpenManage Mobile v2.0?

Access servers remotely through OME

Access SupportAssist reports

Access a Virtual Console (VNC over SSH) securely

Access iDRAC remotely

12. What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

Flexibility to choose interconnects

Fixed networking card

Consume a PCIe slot

Provide a hot-swap component

13. You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives.

Which PERC model best supports this configuration?

S140

H740P

H740T

H330

14. What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

Wi-Fi connection

NFC connection

Ethernet cable

Micro-AB USB

15. What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

SupportAssist Enterprise

iSM

OpenManage Essentials

iDRAC9

16. DRAG DROP

Match each status LED indicator on the Dell EMC 14G PowerEdge server with its corresponding condition.

17. An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.

What should the engineer do to complete the task?

Add the PowerEdge R420 PSU modules to the PowerEdge R440

Order a new PSU specific to the existing PowerEdge R440

Add the PowerEdge R430 PSU modules to the PowerEdge R440

Configure the PowerEdge R440 PSU with 1+1 configuration

18. What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

Firmware: Upgrade to latest available version Configuration Apply always

Firmware Allow version upgrade only Configuration: Disabled

Firmware: Match firmware of replaced part Configuration Apply always

Firmware Disabled Configuration Apply only if firmware match

Specialist-Implementation Engineer PowerEdge Version 2.0 DES-4122 Questions

Specialist-Implementation Engineer PowerEdge Version 2.0 DES-4122 Questions

Share this post

Leave a Reply Cancel reply

Related Posts