Valid Dumps for You to Pass HPE7-A07 Exam

dumps2024-03-11T09:54:08+08:00

HPE7-A07 Aruba Certified Campus Access Mobility Expert Written Exam contains 70 questions, and you have 2 hours to finish the test. The required passing score for the HPE7-A07 exam is 67%. The available language is English. Passing the HPE7-A07 exam is a required step for you to earn ACX – Campus Access Mobility certification. We provide the latest dumps for the HPE7-A07 Aruba Certified Campus Access Mobility Expert Written exam, which can guarantee you pass easily. Free ACX – Campus Access Mobility HPE7-A07 exam dumps are available below.

Page 1 of 3

1. Exhibit.

Which would explain this issue?

HTTPS wildcard certificates are not supported

HTTPS certificate is not required in ClearPass Guest.

captiveportal-login aruba-training com needs to be entered m the Address field for the ClearPass Guest

".aruba-training com needs to be entered in the Address field for the ClearPass Guest

2. A customer is evaluating device profiles on a CX 6300 switch.

The test device has the following attributes:

• MAC address = 81:cd:93:13:ab:31

• LLDP sys-desc = iotcontroller

The test device is being assigned to the ‘’lot-dev’' role However, the customer requires the "lot-prod’’ role be applied.

Given the configuration, what is causing the "iot-dev" role to be applied to the device'?

The test device does not support CD

The device-profile precedence order is not configured.

An external RADIUS server is unreachable.

The LLDP system description matches the IIdp-group configuration.

3. You configured" a bridgedmode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates.

ClearPass shows the following error.

What is needed to resolve this issue?

Enable authorization in your Authentication Method.

Recreate the SSID m tunneled mode.

Modify your ACX-AD authentication source to include the UPN in the search.

Configure ClearPass to trust the client certificate.

4. Exhibit.

An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below.

Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state?

Change R1 and R2 to a network type of point-to-point.

Remove the layer 3 MTU configuration.

Ensure the OSPF process is not configured with passive-interface default.

Change the IP address and mask applied to interface 1/1/1.

5. Exhibit.

Which statement is true?

The SSID supports HR-DSSS data rates

The SSID is supports 6 GHz clients.

The SSID supports 802 11ax clients.

The SSID supports 802 11ac clients.

6. You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com

How would you onboard these gateways successfully into HPE Aruba Networking Central?

A)

Option A

Option B

Option C

Option D

7. You configured a tunneled SSID with captive portal and a ClearPass Guest Self Registration workflow when testing and launching the self-registration workflow, after successful registration, the login action shows the following error:

What is the best solution to resolve this error?

You need to include the root and intermediate certificates in the captive portal certificate for your access points

You need to De connected to the guest SSiD while testing.

You need to change the Login Address in ClearPass to securelogin arubanetworKs.com

You need to include the root and intermediate certificates in the captive portal certificate for your gateway

8. What directly affects the MCS used by wireless stations? (Select two.)

SNR

retry rate

channel utilization

number of connected clients

frequency band

9. Which command would allow you to verity receipt of a CoA message on an AOS 10 GW?

packet-capture datapath udp 3799

packet-capture controipath udp 3799

packet-capture interprocess udp 3799

tcpdump host-port 3799

10. You created a new SSID with the security settings shown in the exhibit.

Some, but not all users complain that client devices are unable to connect to this SS1D.

What is the reason for this?

The WPA3 Enterprise GCM-2S6 mode does not support transition mode.

WPA3 Enterprise is not backward compatible with WPA2 Enterprise.

MAC authentication after a failed 802. ix authentication is not possible as the option "MAC Authentication Fall-Through" is disabled.

The primary servers shared key differs from the shared key configured for this server on HPE Aruba Networking Central.

Page 2 of 3

11. Exhibit.

Which statement is true given the following CLI output from a CX 6300?

There are no active fabric clients on the CX switch with RD 172.16.10.1

A wired client with IP address 10.203 1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2.

A wired client with IP address 10 203 1 100 has a host route that is not being properly advertised

The overlay loopbacK addresses are advertised in the faerie with 2d-bit subnet masks

12. Your customer asked for help to apply an ACL for wireless guest users with the following criteria:

• Wi-Fi guests are on VLAN 555

• allow internet access

• only allow access to public DNS servers

• deny access to all internal networks except for any DHCP server

These session ACLs are already present in the CLI of the mobility gateway group:

You have access to the CLl.

Which user role meets all the criteria?

A)

Option A

Option B

Option C

Option D

13. Refer to the CLI output below:

What statement about the output above is correct?

The port-access role was configured with gateway-role visitor

The secondary tunnel endpoint IP is 10.10-10.151.

The client authenticated using dot1x.

The UBT zone was configured to use a user-defined VRF

14. A Windows device attempts to connect to an 802.1X network but it is not receiving the correct role. TEAP has been configured asthe only authentication method in ClearPass.

The wireless configuration is correct.

Exhibit.

What is me mostlikelycause?

The Windows device needs 10 De configured tor TEA

ClearPass requires a second authentication method.

802.1X is not compatible with TEAP in windows device

Only machine authentication should be configured on the Windows device

15. Exhibit.

Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?

CRITICAl_AUTH

DEFAULT_AUTH

CRIT1CAL_V0ICE

PRE_AUTH

16. A customer is evaluating device profiles on a CX 6300 switch.

The test device has the following attribute:

• MAC address=81:cd:93:13:ab:31

The test device needs to be assigned the "lot-prod'' role, in addition the "lot-default" role must be applied for any other device connected lo interface 1/1/1. This is a lab environment with no configuration of any external authentication server for the test.

Given the configuration example, what is required to meet this testing requirement?

Enter the command "pot-access device-profile mode block-until-profile-applied"" for interface 1/1/1.

Enter the command "port-access fallback-role lot-default globally

Enter the command "port-access onboarding-method precedence" to set device profiles with a lower precedence.

Enter the command "port-access device-profile mode block-until-profile-applied" globally.

17. What is me recommended configuration to ensure link aggregation is consistent in a campus topology using VSX with two aggregation switches and downlinks to access switches?

Use a custom LACP hash algorithm for improved load Balancing.

Keep the MTU values at the default setting for GRE and VXLAN communications

Use the command "vsx-sync mclag-interfaces" under the VSX context.

Use the command "vsx-sync active-gateways" under the VSX context.

18. A customer has interfering devices that are seen over the air. They contact you and ask you to configure RAPIDS to help identify interfering and rogue APs. HPE Aruba Networking Central identifies a rogue AP and displays the connected switch port.

How can HPE Aruba Networking Central identify which switch port the AP is connected to?

device profiting on the switch

from the AP MAC address table

from the switch LLDP neighbors table

from the switch MAC address table

19. A deployment using AP-635S is connected to a stack of CX 6300s as shown.

The output of the snow LACPinterfaces shews the following:

What is causing this issue?

e0 is connected to a smart rate interface, and e1 is connected to a non-smart rate interface.

Spanning tree and loop protect are enabled on both AP uplink ports.

Each AP interface is connected to a routed-only interlace on different networks

The AP is configured with LACP active

20. Exhibit.

A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation.

What can the network administrator conclude from the results?

The data rate increased from 6 Mops to 300 Mops because Broadcast Multicast optimization (BCMCO) was configured.

The capture taken after optimization does not show a packet length because Multicast Transmission Optimization was configured.

The type flew remains consistent because Dynamic Multicast Optimization (DMO) was configured.

The data rate increased from 6 Mbps to 300 Mops because Dynamic Multicast Optimization (DMO) was configured.

Page 3 of 3

21. You configured a WPA3-SAE with the following MAC Authentication Role Mapping inCloud Authentication and Policy:

With further default settings assume a new Android phone is connected to the network.

Which role will the client be assigned after connecting forthe first time?

byod

client will be rejected network access

lot-local

unmatched-device

22. Exhibit.

You updated your gateway to me most recent firmware However after the firmware was updated, the gateway could no longer connect to HPE Aruba Networking Central. Your corporate ITIL procedures require you to implement your backout plan. You connected a console cable to your gateway and saw the following prompt.

Cpxload#

in what order, do you need to execute the following commands to return to the previous firmware version?

Valid Dumps for You to Pass HPE7-A07 Exam

Valid Dumps for You to Pass HPE7-A07 Exam

Share this post

Leave a Reply Cancel reply

Related Posts