VMware vSAN Specialist 5V0-22.21 Dumps Questions

dumps2021-12-29T06:11:51+08:00

Are you planning to earn VMware Specialist – vSAN 2021 certification? If so, you need to pass VMware certification 5V0-22.21 exam. There are 76 questions in real VMware certification 5V0-22.21 exam, and you have 130 minutes to finish the test. The required passing score of VMware 5v0-22.21 exam is 300. The exam format is Single and Multiple Choice, Proctored. VMware vSAN Specialist 5V0-22.21 dumps questions are the good material for you to pass. Free VMware certification 5V0-22.21 dumps questions are available below.

Page 1 of 3

1. A vSAN administrator notices the VMware Skyline Health: Network Latency Check reports indicate three hosts are non-compliant.

Which action should the vSAN administrator take?

Reboot the noncompliant hosts one at a time.

Rerun the VMware Skyline Health: vSAN Cluster Partition report.

Place the noncompliant hosts into an isolated network.

Check VMKNICs, uplinks. VLANs. physical switches, and associated settings.

2. An Application Clustering Solution requires an in-guest attachable LUN which can be shared across two different VMs.

Which vSAN feature can meet this requirement?

vSAN Data Persistence

vSAN iSCSI Target Service

vSAN HCI Mesh

vSAN Datastore Sharing

3. A new host with local storage devices has been added to a vSAN cluster. Now, the administrator would like to increase the capacity of the vSAN datastore.

What must be done to the new host to accomplish this goal?

Configure a RAID set on the storage controller.

Create one or more disk groups.

Delete all existing partitions.

Perform a storage device rescan.

4. A customer is running a number of compute-intensive application workloads on their existing 4-node vSAN cluster that has resulted in resource contention. To provide additional compute resources, the vSAN administrator has decided to deploy a new 4-node vSAN compute-only cluster so that a HCI Mesh can be configured.

Which three points would the vSAN administrator need to consider before using this configuration? (Choose three.)

The storage policy must be based on the number of hosts within the client cluster.

The storage policy is based on the total number of hosts across both client and server clusters.

A storage policy of Erasure Coding with FTT=2 would be supported.

A storage policy of Mirroring with FIT 1 would be supported.

A storage policy of Erasure Coding with hi 1=1 would be supported.

The storage policy must be based on the number of hosts within the server cluster.

5. A single capacity disk fails within a vSAN 7.0 U1 cluster running with a “compression-only” configuration enabled. The vSAN administrator must recognize the platform impact that has occurred and take steps to correct it.

Which action should the vSAN administrator take?

The hardware failure will impact the entire disk group, so the vSAN administrator will need to remove and recreate the disk group following the replacement of the failed storage device.

The hardware failure will stop the running workloads, so the vSAN administrator will need to disable the compression-only configuration, replace the failed capacity device, and then re-create the disk group.

The hardware failure will impact all disk groups within the ESXi host, so the vSAN administrator will need to manually remove the ESXi node from the vSAN Cluster, replace the failed capacity device, and then re-create the disk group.

The hardware failure will only impact the specific capacity disk, so the vSAN administrator will need to remove and replace the failed capacity device.

6. A vSAN administrator has recently upgraded a vSAN cluster to 7.0 U1 and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.

Which scenario would prevent this feature from operating properly?

The physical disk has reached an 80% full reactive rebalance threshold.

The used space on vSAN datastore exceeds the suggested slack rebuild threshold.

The used space on vSAN datastore exceeds the suggested host rebuild threshold.

Underutilized space is above 25-30% of the total capacity threshold.

7. All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:

Failures to Tolerate (FTT) rule is set to “2 Failures - RAID-1 (Mirroring)”.

The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.

Which action should the vSAN administrator take to meet this goal?

Change the FTT rule to “1 Failure - RAID-1 (Mirroring)”, and select “Now” for Reapply to VMs.

Add the “Flash read cache reservation” rule to the storage policy, and set to 0%.

Disable Operations reserve and Host rebuild reserve and click “Apply”.

Modify the FTT rule to “2 Failures - RAID-5 (Erasure Coding)”.

8. An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.

The final check requires the administrator to pull out a disk from one of the vSAN hosts.

Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)

By default. vSAN will delay the rebuilding of affected components for 60 minutes.

All components on the device will be marked as absent.

By default. vSAN will start the rebuilding of affected components immediately.

By default vSAN will delay the rebuilding of affected components for 30 minutes.

All components on the device will be marked as degraded.

9. Which VM file type resides in the VM home namespace object on a vSAN datastore?

vmem B vmx

vswp

vmsn

10. When attempting to add a directly attached disk device to a host disk group, the intended disk does not show among the available devices in disk management.

Which action should be taken?

Delete all device partitions

Create a 1GB metadata partition

Format the existing partition

Create a VMFS partition

Page 2 of 3

11. A vSAN administrator is deploying multiple 2-node clusters to remote branch offices. The nodes already have an old vSphere 7.0 image, but the administrator would like to update the image and ensure consistency across all the nodes.

The administrator configured vLCM on the first vSAN cluster and exported the image.

Which format should the administrator choose?

ISO Image

TXT File

ZIP File

JSONFile

12. An organization is facing vSAN storage capacity challenges on one of their vSAN enabled clusters, while other vSAN enabled clusters are underutilized. The current vSAN version is 7.0 U1.

Which vSAN feature should be used to resolve this challenge in the quickest way?

vSANHCIMesh

vSAN Replication

vSAN Stretched Clusters

vSAN Datastore(s)

13. Which state is NOT a compliance status of a VM Storage Policy?

Compliant

Noncompliant

Stale

Not Applicable

14. What are two purposes of a vSAN storage policy (Choose two.)

To determine vSAN encryption level

To enable TRIM/UNMAP

To define how the VM storage objects are provisioned

To guarantee the required level of service

To enable deduplication and compression

15. A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.

Which action should the administrator take?

Change the Default Storage Policy to have stripe width of 13.

Modify the stripe width for the application on the advanced settings for the V

Add more magnetic capacity devices in the affected host.

Increase the stripe width based on the number of capacity devices within the disk group.

16. A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.

What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)

Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.

Add cache and capacity devices to the compute-only hosts.

Add additional cache and capacity devices to the existing data nodes.

Add additional compute-only hosts from the vSAN cluster.

Add to the existing disk groups two cache devices and the eight capacity devices.

17. A vSAN administrator received the following alert from vRealize Operations Manager:

“VMKernel NIC is experiencing high number of dropped packets.”

What is the quickest path in vRealize Operations Manager that should be used to further investigate this alert?

Home -> vSphere Optimization Assessment

Home -> Troubleshoot -> vSAN

Alerts -> Triggered Alerts

Environment -> vSAN and Storage Devices

18. Refer to the exhibit:

A vSAN administrator was examining the status of Virtual Objects and found inaccessible objects that are occupying significant storage capacity.

Which action is needed to restore the storage capacity?

Evacuate data on affected node by using the Full Data Migration mode.

Identity and remove the obsolete object.

Restart the host, and obsolete objects will be removed on their own.

Trigger a manual resync, and allow vSAN to heal the object.

19. A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.

A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Addon.

Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

Add an individual component to the vLCM image that has the updated NIC driver.

Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image is configured to use the most recent version of the vendor addon.

Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver.

Remove the Vendor Addon from the vLCM image, and then manually install the network driver on the servers.

20. When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link “Repair Objects Immediately” is enabled.

What is the meaning of this message?

One or more objects have absent components.

Immediate action must be taken to effect object repair.

One or more objects have become inaccessible.

The repair delay timer has elapsed, and ^synchronization has begun.

Page 3 of 3

21. A vSAN administrator has three available racks and six vSAN hosts and needs to protect against a rack failure while maximizing resources.

Which two strategies should the vSAN administrator use to achieve this goal? (Choose two.)

RAID-5/FTT=1

vSAN stretched cluster

Specify fault domains

RAID-6/FTT=2

2-node configuration

22. A new vSAN Cluster with four hosts has to be designed for a single site architecture.

Which design decision is correct?

All the data must remain accessible even with two host failures.

Configure the storage controllers to use RAI

Use block-based storage for the newvSAN cluster.

Only hardware listed on the VMware Compatibility Guide will be deployed.

23. Which vSAN advanced setting can be adjusted to avoid rebuild operations during a host hardware maintenance window that is expected to exceed 90 minutes?

Forced Provisioning

Thin Swap

Object Repair Timer

Automatic Rebalance

VMware vSAN Specialist 5V0-22.21 Dumps Questions