VMware vSAN Specialist v2 5V0-22.23 Exam Online Dumps

dumps2023-09-01T11:44:51+08:00

VMware vSAN Specialist v2 5V0-22.23 exam is a related test for VMware Certified Specialist – vSAN 2023 certification. VMware Certification 5V0-22.23 exam information is available below. There are 76 questions in the real VMware 5V0-22.23 exam, and you have 125 minutes to answer all the questions. The required passing score is 300. The available language is English. We provide the latest VMware vSAN Specialist v2 5V0-22.23 exam online dumps, which are helpful for you to test the topics. Free VMware vSAN Specialist v2 5V0-22.23 exam online dumps are below.

Page 1 of 5

1. A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reserve option.

What is the purpose of using this option?

Configures space for external operations

Provides space for internal operations

Reserves space for tolerating failures

Allocates space forvSAN upgrades

2. An administrator has a 4-node vSAN cluster, and all virtual machine storage policies are configured as RAID-1 FTT-1. The administrator puts Host-1 in maintenance mode using "Ensure Accessibility".

During this time, Host-2, which is holding the updated object replica, fails permanently. A few moments later, Host-1 exits maintenance mode.

What happens to the writes that were committed on Host-2 after Host-1 enters this mode?

Any writes to Host-2 that occurred after Host-1 entered maintenance mode are lost.

The latest writes are retrieved from backups.

The latest writes were also written on a third host and are applied to the stale components of Host-1 once the host exits maintenance mode.

The latest writes from Host-2 are applied to the stale components of Host-1 once the host exits maintenance mode.

3. Which solution can automate the deployment of a vSAN cluster as part of a full Software-Defined Datacenter?

VMware Cloud Foundation

vSphere Replication

vRealize Suite Lifecycle Manager

VMware Cloud Director

4. An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend.

In preparation, the administrator runs the Data Migration Pre-Check.

Which two items are being checked? (Choose two.)

vSphere HA state

Object compliance and accessibility

DRS settings

Affinity rules

Cluster capacity

5. All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:

Failures to Tolerate (FTT) rule is set to “2 Failures - RAID-1 (Mirroring)”.

The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.

Which action should the vSAN administrator take to meet this goal?

Change the FTT rule to “1 Failure - RAID-1 (Mirroring)”, and select “Now” for Reapply to VMs.

Add the “Flash read cache reservation” rule to the storage policy, and set to 0%.

Disable Operations reserve and Host rebuild reserve and click “Apply”.

Modify the FTT rule to “2 Failures - RAID-5 (Erasure Coding)”.

6. A vSAN administrator has two identical VMware vSAN clusters, one for staging workloads and another for production workloads. Due to an unforeseen capacity requirement, the vSAN administrator is tasked with merging the staging vSAN cluster into the production.

Which two actions should the vSAN administrator perform on the staging cluster prior to moving the vSAN nodes to the production cluster? (Choose two.)

Remove all capacity drives.

Delete all Disk Groups.

Enable File Services.

Disable vSAN Services.

Mark the disks for partial reservation.

7. A vSAN administrator has reported a security vulnerability to the security officer of the organization. Currently, the vSAN cluster runs on vSAN 7.0. The administrator suggests patching the vSAN cluster and gets approval from the security officer to apply the latest patch for vSAN.

The administrator uses vSphere Lifecycle Manager to apply the patch to the current image.

The organization requirements state that patches should be installed as fast as possible on the hosts.

Which configuration should the administrator apply to complete this installation?

Enable the quick boot feature in the host remediation settings for the baselines.

Disable the hardware compatibility check in the host remediation settings for the images.

Enable the quick boot setting in the host remediation settings for the images.

Disable HA admission control in the host remediation settings for the baselines.

8. The administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.

Which two steps are needed to complete this task? (Choose two.)

Put the VMs in a vSphere DRS group.

Create a storage policy that includes site affinity rules and apply to VMs.

Create a single VM/Host group across both sites.

Create VM/Host groups for the two sites.

Put the VMs in the correct VM group.

9. A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the “Failures to tolerate” is set to one or higher.

Which strategy should be used to achieve this goal?

Disable de-duplication and compression prior to the upgrade.

Perform a complete update, omitting the on-disk format update.

Select the *No data migration" maintenance mode option.

Update only select, mission-critical clusters.

10. A vSAN administrator has been tasked to add capacity to an existing vSAN cluster and has ordered enough larger capacity devices to complete this work. Tests have been executed, and the replacement from one single capacity device will require 70 minutes.

Which two approaches can the vSAN administrator use to complete this task? (Choose two.)

Confirm with pre-check that enough capacity for data migration is available, select a capacity device, click "remove disk" with "Ensure accessibility", replace capacity device, claim unused device, and then repeat one-by-one.

"Change object repair timer to 75 minutes", "set capacity device to offline", and then replace capacity device one-by-one.

Enter Maintenance Mode, confirm that pre check is fine, select "Full data migration", "Shutdown ESXi host", replace all capacity devices, "Restart ESXi host", replace capacity devices in disk groups, exit Maintenance Mode, confirm that raw capacity has been increased, and then repeat on ESXi host one-by-one.

"Shutdown ESXi host", and replace all capacity devices. Repeat this sequence one-by-one.

Execute a "Data Migration Pre-Check", enter Maintenance Mode with default setting, "Shutdown ESXi host", replace all capacity devices, and then repeat on ESXi hosts one-by-one.

Page 2 of 5

11. A vSAN administrator has three available racks and six vSAN hosts and needs to protect against a rack failure while maximizing resources.

Which two strategies should the vSAN administrator use to achieve this goal? (Choose two.)

RAID-5/FTT=1

vSAN stretched cluster

Specify fault domains

RAID-6/FTT=2

2-node configuration

12. A VMware vSAN administrator is configuring advanced monitoring with VMware vRealize Operations Manager and has the following requirement:

• Ability to receive analytical information from the hard drive to determine a possible future failure of the hard drive.

What should be enabled for data collection when configuring the vSAN Adapter Instance?

IOPS (Input/Output Operations Per Second)

DST (Disk Self-Test)

SMART (Self-Monitoring, Analysis and Reporting Technology)

SSP (Storage Service Provider)

13. A vSAN administrator needs to find the metrics for objects containing data served up by the vSAN iSCSI service.

On which level should the vSAN administrator look?

Cluster

Virtual Machine

vCenter Server

vSAN iSCSI Object

14. A currently-deployed vSAN cluster must deliver persistent storage to be used by vSphere with Tanzu. The administrator needs to properly configure the vSAN Direct Configuration for this solution.

Which three steps should be taken? (Choose three.)

Configure vSAN File Services for vSAN Direct.

Assign the storage policy to the container VMs.

Create a storage policy for vSAN Direct.

Create a vSAN storage policy with FTT=0.

Assign the storage policy to the namespace.

Claim unused disks for vSAN Direct.

15. After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.

The architect would like to know how many components will be created based on the following configuration:

✑ 2x 100 GB VMDK

✑ RAID 1 vSAN Storage Policy

✑ 4x Point in Time snapshots

How many components will be created?

16. A storage administrator is facing degraded performance for the VMs running on a vSAN enabled vSphere Cluster and needs an out-of-the-box tool to identify the root cause of the problem.

Which tool should be used?

top

esxcli

vmkfstools

vsantop

17. A vSAN administrator is looking at adding a new vSAN cluster with hosts that have 512GB memory.

What is the minimum requirement for the node’s flash boot device?

16GB

128GB

32GB

4GB

18. A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.

Which step should be taken by the administrator to meet this goal?

Shut down the production VMs.

Perform a live vMotion to another host.

Disable the vSAN Service on the VMkernel port.

Enter Maintenance Mode with 'Full Data Migration'

19. A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.

Which action should the administrator take?

Change the Default Storage Policy to have stripe width of 13.

Modify the stripe width for the application on the advanced settings for the V

Add more magnetic capacity devices in the affected host.

Increase the stripe width based on the number of capacity devices within the disk group.

20. Which two storage policy changes result in a component resync? (Choose two.)

Changing object space reservation to 100

Changing the failure tolerance method

Disabling object checksum (from checksum enabled)

Adding an IOPS Limit rule to a storage policy

Enabling object checksum (from checksum disabled)

Page 3 of 5

21. A vSAN architect is using the vSAN Sizer to build an All-Flash vSAN cluster for an accounting company. The architect is trying to determine why 12 TBs are set aside for system overhead and is reviewing the items that are include in the overhead capacity.

Which two items are included? (Choose two.)

VM swap overhead

Encryption overhead

Disk Format overhead

Host upgrade overhead

File System overhead

22. A vSAN administrator observes that the VMware Skyline Health: Disk Format Version reports a format version that is lower than the expected version.

What does this status mean?

The vSAN administrator must enable encryption for the vSAN datastore.

The vSAN administrator must perform an immediate upgrade of the on-disk format.

A vSAN on-disk format upgrade is recommended.

Deduplication and compression must be disabled for the vSAN datastore.

23. A new vSAN Cluster with four hosts has to be designed for a single site architecture.

Which design decision is correct?

All the data must remain accessible even with two host failures.

Configure the storage controllers to use RAI

Use block-based storage for the newvSAN cluster.

Only hardware listed on the VMware Compatibility Guide will be deployed.

24. Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

Disable vSphere High Availability (HA).

Create uniformly-configured hosts.

Reference the VMware Compatibility Guide.

Disable vSphere Cluster Services (vCLS).

Disable vSAN performance service.

25. A large financial company has an existing vSAN 7.0 U1 cluster containing production virtual machines and the vCenter Server. The cluster needs to be physically moved to another location within the datacenter to allow new racks to be installed, so the platform needs to be powered down.

Which action should the vSAN administrator take to perform this procedure safely?

Enter Maintenance Mode with No data migration

Enter vSAN Enhanced durability mode

Enter Maintenance Mode with Ensure accessibility option

Enter Maintenance Mode with Full data migration

26. What does enabling vSAN operations reserve help ensure?

Stores vSphere HA heartbeats

Reconfigures data components

Reserves space in case of single host failure

Allocates capacity for vCLS

27. An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.

The final check requires the administrator to pull out a disk from one of the vSAN hosts.

Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)

By default. vSAN will delay the rebuilding of affected components for 60 minutes.

All components on the device will be marked as absent.

By default. vSAN will start the rebuilding of affected components immediately.

By default vSAN will delay the rebuilding of affected components for 30 minutes.

All components on the device will be marked as degraded.

28. What should be used to verify object resynchronization progress and impact after a global policy change?

HCI Bench

vCenter HTML5 client

vRealize Log Insight

vRealize Network Insight

29. Saved the configuration

After saving the configuration, all hosts in the cluster are out of compliance.

Which step is needed next to accomplish this task?

Remediate all nodes in the cluster.

Roll back the vLCM configuration to the latest compliant image.

Place all hosts in maintenance mode.

Stage the upgrade images.

30. What is the maximum time range that can be stored by the vSAN health check history?

30 days

60 days

180 days

7 days

Page 4 of 5

31. A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).

Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

Select Remediate All through vLCM to upgrade all hosts in the cluster.

Manually remediate one host at a time in the vSAN cluster.

Place all hosts in the vSAN cluster into Maintenance Mode.

Stage the upgrade of the vSAN cluster through vLC

32. Which tool should be used to identify vSAN unassociated objects?

vSphere Host Client

vSphere CLI

vsantop

PowerCLI

33. A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.

Why is this situation occurring?

The administrator has read-only permissions on the cluster level.

vSAN Performance service is not enabled.

The vRealize Operations Manager is not integrated with vSAN cluster.

vSAN statistics are only available via CL

34. Which vSAN advanced setting can be adjusted to avoid rebuild operations during a host hardware maintenance window that is expected to exceed 90 minutes?

Forced Provisioning

Thin Swap

Object Repair Timer

Automatic Rebalance

35. An administrator wants to check the vSAN cluster health during the maintenance window while vCenter Server is offline.

What are two ways to complete this task? (Choose two.)

HCIBench

ESXi system logs on vSAN datastore

esxcli

vSphere Host Client

esxtop

36. A vSAN administrator is deploying multiple 2-node clusters to remote branch offices. The nodes already have an old vSphere 7.0 image, but the administrator would like to update the image and ensure consistency across all the nodes.

The administrator configured vLCM on the first vSAN cluster and exported the image.

Which format should the administrator choose?

ISO Image

TXT File

ZIP File

JSONFile

37. What happens to a disk group during cache disk removal?

It uses one of the capacity devices as cache.

It uses the spare cache disk.

It goes offline.

It changes the on-disk format.

38. An administrator is preparing maintenance on a host in a vSAN cluster, and the maintenance is expected to take less than one hour. The administrator is considering using the "Full Data Migration" but understands that this can be time consuming and also has additional capacity and performance considerations.

Which action would alleviate these concerns?

Use maintenance mode with "No Data Migration".

Use maintenance mode with "Ensure Accessibility".

Use maintenance mode with "Ensure Accessibly", and increase the vSAN object repair timer to more than one hour.

Take an outage window when users are less likely to be working.

39. A vSAN administrator has recently upgraded to vSAN 7.0 U1. The vSAN administrator wants to control the amount of Capacity Reserve to use the underutilized capacity of - 140TB in the cluster of 12 vSAN ReadyNodes & 400TB storage for vSAN internal operations.

Which two options should be used to accomplish this goal? (Choose two.)

Slack Rebuild Reserve

Buffer Reserve

Capacity Plan Reserve

Host Rebuild Reserve

Operations Reserve

40. A 100GB virtual disk object has this storage policy assigned to it:

✑ Site disaster tolerance: None - standard cluster

✑ Failures to Tolerate: 1 failure - RAID-1 (Mirroring)

✑ Number of disk stripes per object: 3

What is the maximum amount of raw vSAN storage capacity consumed by this virtual disk?

200GB

100GB

300GB

600GB

Page 5 of 5

41. An administrator needs to design a new vSAN cluster to host production mission critical workloads.

Which three topics would impact this design? (Choose three.)

The amount of ESXi host memory

Effective vSAN datastore capacity

The amount of virtual Disks per VM

The size of the cache tier according to workload characteristics

The supported CPU type of the ESXi host

Usage of vSphere DRS

42. A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.

Which action should the vSAN administrator take?

Place the non-compliant hosts into an isolated network partition.

Rerun the VMware Skyline Health: vSAN Cluster Partition report.

Check VMKNICs, uplinks, physical switches, and associated settings.

Immediately reboot the non-compliant hosts.

VMware vSAN Specialist v2 5V0-22.23 Exam Online Dumps

VMware vSAN Specialist v2 5V0-22.23 Exam Online Dumps

Share this post

Leave a Reply Cancel reply

Related Posts